Tech PIN from config

This commit is contained in:
Heath Volmer
2017-10-06 10:19:01 -06:00
parent f9d320e2b2
commit 0196997a4e
12 changed files with 945 additions and 974 deletions

View File

@@ -102,7 +102,6 @@ namespace PepperDash.Essentials.Core
eRoutingSignalType signalType, int cycle, RouteDescriptor routeTable)
{
cycle++;
Debug.Console(2, destination, "*#* SelectInput-cycle {1}. Finding {2} route back to {0}", source.Key, cycle, signalType);
var destDevInputTies = TieLineCollection.Default.Where(t =>
t.DestinationPort.ParentDevice == destination && (t.Type == signalType || t.Type == eRoutingSignalType.AudioVideo));
@@ -115,7 +114,6 @@ namespace PepperDash.Essentials.Core
RoutingInputPort goodInputPort = null;
if (directTie != null) // Found a tie directly to the source
{
Debug.Console(2, destination, "*#* Found direct tie to {0}**", source.Key);
goodInputPort = directTie.DestinationPort;
}
else // no direct-connect. Walk back devices.

View File

@@ -182,7 +182,6 @@ namespace PepperDash.Essentials.Devices.Displays
// Good length, grab the message
var message = newBytes.Skip(4).Take(msgLen).ToArray();
Debug.Console(2, this, "*#* Parsing input: {0}", ComTextHelper.GetEscapedText(message));
// At this point, the ack/nak is the first byte
if (message[0] == 0x41)
@@ -254,7 +253,6 @@ namespace PepperDash.Essentials.Devices.Displays
IsInStandby = true;
if (powerByte == 0x00 && IsInStandby) // Ignore power off if coming from standby - glitch
{
Debug.Console(2, this, "*#* STANDBY GLITCH - IGNORING");
IsInStandby = false;
return;
}
@@ -319,7 +317,7 @@ namespace PepperDash.Essentials.Devices.Displays
checksum = checksum & 0x000000FF; // mask off MSBs
b[b.Length - 1] = (byte)checksum;
if(Debug.Level == 2) // This check is here to prevent following string format from building unnecessarily on level 0 or 1
Debug.Console(2, this, "*#* Sending:{0}", ComTextHelper.GetEscapedText(b));
Debug.Console(2, this, "Sending:{0}", ComTextHelper.GetEscapedText(b));
Communication.SendBytes(b);
}
@@ -372,7 +370,6 @@ namespace PepperDash.Essentials.Devices.Displays
// Fake cool-down cycle
CooldownTimer = new CTimer(o =>
{
Debug.Console(2, this, "*#* Cooldown timer ending");
_IsCoolingDown = false;
IsCoolingDownFeedback.FireUpdate();
}, CooldownTime);

View File

@@ -110,6 +110,7 @@ namespace PepperDash.Essentials.Room.Config
public EssentialsRoomAddressPropertiesConfig Addresses { get; set; }
public EssentialsRoomOccSensorConfig OccupancySensors { get; set; }
public EssentialsLogoPropertiesConfig Logo { get; set; }
public EssentialsRoomTechConfig Tech { get; set; }
public EssentialsRoomVolumesConfig Volumes { get; set; }
}
@@ -176,4 +177,9 @@ namespace PepperDash.Essentials.Room.Config
public List<string> Types { get; set; }
}
public class EssentialsRoomTechConfig
{
public string Password { get; set; }
}
}

View File

@@ -1,433 +1,433 @@
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Crestron.SimplSharp;
using PepperDash.Core;
using PepperDash.Essentials.Core;
using PepperDash.Essentials.Room.Config;
namespace PepperDash.Essentials
{
public class EssentialsHuddleSpaceRoom : EssentialsRoomBase, IHasCurrentSourceInfoChange
{
public event EventHandler<VolumeDeviceChangeEventArgs> CurrentVolumeDeviceChange;
public event SourceInfoChangeHandler CurrentSingleSourceChange;
protected override Func<bool> OnFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
var val = CurrentSourceInfo != null
&& CurrentSourceInfo.Type == eSourceListItemType.Route
&& disp != null
&& disp.PowerIsOnFeedback.BoolValue;
return val;
};
}
}
/// <summary>
///
/// </summary>
protected override Func<bool> IsWarmingFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
return disp.IsWarmingUpFeedback.BoolValue;
else
return false;
};
}
}
/// <summary>
///
/// </summary>
protected override Func<bool> IsCoolingFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
return disp.IsCoolingDownFeedback.BoolValue;
else
return false;
};
}
}
public EssentialsRoomPropertiesConfig Config { get; private set; }
public IRoutingSinkWithSwitching DefaultDisplay { get; private set; }
public IRoutingSinkNoSwitching DefaultAudioDevice { get; private set; }
public IBasicVolumeControls DefaultVolumeControls { get; private set; }
public bool ExcludeFromGlobalFunctions { get; set; }
/// <summary>
/// The config name of the source list
/// </summary>
public string SourceListKey { get; set; }
public string DefaultSourceItem { get; set; }
public ushort DefaultVolume { get; set; }
/// <summary>
/// If room is off, enables power on to last source. Default true
/// </summary>
public bool EnablePowerOnToLastSource { get; set; }
string LastSourceKey;
/// <summary>
///
/// </summary>
public IBasicVolumeControls CurrentVolumeControls
{
get { return _CurrentAudioDevice; }
set
{
if (value == _CurrentAudioDevice) return;
var oldDev = _CurrentAudioDevice;
// derigister this room from the device, if it can
if (oldDev is IInUseTracking)
(oldDev as IInUseTracking).InUseTracker.RemoveUser(this, "audio");
var handler = CurrentVolumeDeviceChange;
if (handler != null)
CurrentVolumeDeviceChange(this, new VolumeDeviceChangeEventArgs(oldDev, value, ChangeType.WillChange));
_CurrentAudioDevice = value;
if (handler != null)
CurrentVolumeDeviceChange(this, new VolumeDeviceChangeEventArgs(oldDev, value, ChangeType.DidChange));
// register this room with new device, if it can
if (_CurrentAudioDevice is IInUseTracking)
(_CurrentAudioDevice as IInUseTracking).InUseTracker.AddUser(this, "audio");
}
}
IBasicVolumeControls _CurrentAudioDevice;
/// <summary>
/// The SourceListItem last run - containing names and icons
/// </summary>
public SourceListItem CurrentSourceInfo
{
get { return _CurrentSourceInfo; }
private set
{
if (value == _CurrentSourceInfo) return;
var handler = CurrentSingleSourceChange;
// remove from in-use tracker, if so equipped
if(_CurrentSourceInfo != null && _CurrentSourceInfo.SourceDevice is IInUseTracking)
(_CurrentSourceInfo.SourceDevice as IInUseTracking).InUseTracker.RemoveUser(this, "control");
if (handler != null)
handler(this, _CurrentSourceInfo, ChangeType.WillChange);
_CurrentSourceInfo = value;
// add to in-use tracking
if (_CurrentSourceInfo != null && _CurrentSourceInfo.SourceDevice is IInUseTracking)
(_CurrentSourceInfo.SourceDevice as IInUseTracking).InUseTracker.AddUser(this, "control");
if (handler != null)
handler(this, _CurrentSourceInfo, ChangeType.DidChange);
}
}
SourceListItem _CurrentSourceInfo;
public string CurrentSourceInfoKey { get; private set; }
/// <summary>
///
/// </summary>
/// <param name="key"></param>
/// <param name="name"></param>
public EssentialsHuddleSpaceRoom(string key, string name, IRoutingSinkWithSwitching defaultDisplay,
IRoutingSinkNoSwitching defaultAudio, EssentialsRoomPropertiesConfig config)
: base(key, name)
{
Config = config;
DefaultDisplay = defaultDisplay;
DefaultAudioDevice = defaultAudio;
if (defaultAudio is IBasicVolumeControls)
DefaultVolumeControls = defaultAudio as IBasicVolumeControls;
else if (defaultAudio is IHasVolumeDevice)
DefaultVolumeControls = (defaultAudio as IHasVolumeDevice).VolumeDevice;
CurrentVolumeControls = DefaultVolumeControls;
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
{
// Link power, warming, cooling to display
disp.PowerIsOnFeedback.OutputChange += (o, a) =>
{
if (disp.PowerIsOnFeedback.BoolValue != OnFeedback.BoolValue)
{
if (!disp.PowerIsOnFeedback.BoolValue)
CurrentSourceInfo = null;
OnFeedback.FireUpdate();
}
};
disp.IsWarmingUpFeedback.OutputChange += (o, a) =>
{
IsWarmingUpFeedback.FireUpdate();
if (!IsWarmingUpFeedback.BoolValue)
(DefaultDisplay as IBasicVolumeWithFeedback).SetVolume(DefaultVolume);
};
disp.IsCoolingDownFeedback.OutputChange += (o, a) =>
{
IsCoolingDownFeedback.FireUpdate();
if (IsCoolingDownFeedback.BoolValue)
(DefaultDisplay as IBasicVolumeWithFeedback).SetVolume(DefaultVolume);
};
}
SourceListKey = "default";
EnablePowerOnToLastSource = true;
}
/// <summary>
///
/// </summary>
public override void Shutdown()
{
RunRouteAction("roomOff");
}
/// <summary>
/// Routes the default source item, if any
/// </summary>
public void RunDefaultRoute()
{
if (DefaultSourceItem != null)
RunRouteAction(DefaultSourceItem);
}
/// <summary>
///
/// </summary>
/// <param name="routeKey"></param>
public void RunRouteAction(string routeKey)
{
RunRouteAction(routeKey, null);
}
/// <summary>
/// Gets a source from config list SourceListKey and dynamically build and executes the
/// route or commands
/// </summary>
/// <param name="name"></param>
public void RunRouteAction(string routeKey, Action successCallback)
{
// Run this on a separate thread
new CTimer(o =>
{
Debug.Console(1, this, "Run route action '{0}'", routeKey);
var dict = ConfigReader.ConfigObject.GetSourceListForKey(SourceListKey);
if(dict == null)
{
Debug.Console(1, this, "WARNING: Config source list '{0}' not found", SourceListKey);
return;
}
// Try to get the list item by it's string key
if (!dict.ContainsKey(routeKey))
{
Debug.Console(1, this, "WARNING: No item '{0}' found on config list '{1}'",
routeKey, SourceListKey);
return;
}
var item = dict[routeKey];
//Debug.Console(2, this, "Action {0} has {1} steps",
// item.SourceKey, item.RouteList.Count);
// End usage timer on last source
if (!string.IsNullOrEmpty(LastSourceKey))
{
var lastSource = dict[LastSourceKey].SourceDevice;
try
{
if (lastSource != null && lastSource is IUsageTracking)
(lastSource as IUsageTracking).UsageTracker.EndDeviceUsage();
}
catch (Exception e)
{
Debug.Console(1, this, "*#* EXCEPTION in end usage tracking (257):\r{0}", e);
}
}
// Let's run it
if (routeKey.ToLower() != "roomoff")
{
LastSourceKey = routeKey;
}
else
{
CurrentSourceInfoKey = null;
}
foreach (var route in item.RouteList)
{
// if there is a $defaultAll on route, run two separate
if (route.DestinationKey.Equals("$defaultAll", StringComparison.OrdinalIgnoreCase))
{
// Going to assume a single-path route for now
var tempVideo = new SourceRouteListItem
{
DestinationKey = "$defaultDisplay",
SourceKey = route.SourceKey,
Type = eRoutingSignalType.Video
};
DoRoute(tempVideo);
//var tempAudio = new SourceRouteListItem
//{
// DestinationKey = "$defaultAudio",
// SourceKey = route.SourceKey,
// Type = eRoutingSignalType.Audio
//};
//DoRoute(tempAudio);
//continue; -- not sure why this was here
}
else
DoRoute(route);
}
// Start usage timer on routed source
if (item.SourceDevice is IUsageTracking)
{
(item.SourceDevice as IUsageTracking).UsageTracker.StartDeviceUsage();
}
// Set volume control on room, using default if non provided
IBasicVolumeControls volDev = null;
// Handle special cases for volume control
if (string.IsNullOrEmpty(item.VolumeControlKey)
|| item.VolumeControlKey.Equals("$defaultAudio", StringComparison.OrdinalIgnoreCase))
volDev = DefaultVolumeControls;
else if (item.VolumeControlKey.Equals("$defaultDisplay", StringComparison.OrdinalIgnoreCase))
volDev = DefaultDisplay as IBasicVolumeControls;
// Or a specific device, probably rarely used.
else
{
var dev = DeviceManager.GetDeviceForKey(item.VolumeControlKey);
if (dev is IBasicVolumeControls)
volDev = dev as IBasicVolumeControls;
else if (dev is IHasVolumeDevice)
volDev = (dev as IHasVolumeDevice).VolumeDevice;
}
CurrentVolumeControls = volDev;
// store the name and UI info for routes
if (item.SourceKey == "$off")
{
CurrentSourceInfoKey = routeKey;
CurrentSourceInfo = null;
}
else if (item.SourceKey != null)
{
CurrentSourceInfoKey = routeKey;
CurrentSourceInfo = item;
}
// And finally, set the "control". This will trigger event
//CurrentControlDevice = DeviceManager.GetDeviceForKey(item.SourceKey) as Device;
OnFeedback.FireUpdate();
// report back when done
if (successCallback != null)
successCallback();
}, 0); // end of CTimer
}
/// <summary>
/// Will power the room on with the last-used source
/// </summary>
public void PowerOnToDefaultOrLastSource()
{
if (!EnablePowerOnToLastSource || LastSourceKey == null)
return;
RunRouteAction(LastSourceKey);
}
/// <summary>
/// Does what it says
/// </summary>
public override void SetDefaultLevels()
{
Debug.Console(0, this, "SetDefaultLevels not implemented");
}
/// <summary>
///
/// </summary>
/// <param name="route"></param>
/// <returns></returns>
bool DoRoute(SourceRouteListItem route)
{
IRoutingSinkNoSwitching dest = null;
if (route.DestinationKey.Equals("$defaultaudio", StringComparison.OrdinalIgnoreCase))
dest = DefaultAudioDevice;
else if (route.DestinationKey.Equals("$defaultDisplay", StringComparison.OrdinalIgnoreCase))
dest = DefaultDisplay;
else
dest = DeviceManager.GetDeviceForKey(route.DestinationKey) as IRoutingSinkNoSwitching;
if (dest == null)
{
Debug.Console(1, this, "Cannot route, unknown destination '{0}'", route.DestinationKey);
return false;
}
if (route.SourceKey.Equals("$off", StringComparison.OrdinalIgnoreCase))
{
dest.ReleaseRoute();
if (dest is IPower)
(dest as IPower).PowerOff();
}
else
{
var source = DeviceManager.GetDeviceForKey(route.SourceKey) as IRoutingOutputs;
if (source == null)
{
Debug.Console(1, this, "Cannot route unknown source '{0}' to {1}", route.SourceKey, route.DestinationKey);
return false;
}
dest.ReleaseAndMakeRoute(source, route.Type);
}
return true;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Crestron.SimplSharp;
using PepperDash.Core;
using PepperDash.Essentials.Core;
using PepperDash.Essentials.Room.Config;
namespace PepperDash.Essentials
{
public class EssentialsHuddleSpaceRoom : EssentialsRoomBase, IHasCurrentSourceInfoChange
{
public event EventHandler<VolumeDeviceChangeEventArgs> CurrentVolumeDeviceChange;
public event SourceInfoChangeHandler CurrentSingleSourceChange;
protected override Func<bool> OnFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
var val = CurrentSourceInfo != null
&& CurrentSourceInfo.Type == eSourceListItemType.Route
&& disp != null
&& disp.PowerIsOnFeedback.BoolValue;
return val;
};
}
}
/// <summary>
///
/// </summary>
protected override Func<bool> IsWarmingFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
return disp.IsWarmingUpFeedback.BoolValue;
else
return false;
};
}
}
/// <summary>
///
/// </summary>
protected override Func<bool> IsCoolingFeedbackFunc
{
get
{
return () =>
{
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
return disp.IsCoolingDownFeedback.BoolValue;
else
return false;
};
}
}
public EssentialsRoomPropertiesConfig Config { get; private set; }
public IRoutingSinkWithSwitching DefaultDisplay { get; private set; }
public IRoutingSinkNoSwitching DefaultAudioDevice { get; private set; }
public IBasicVolumeControls DefaultVolumeControls { get; private set; }
public bool ExcludeFromGlobalFunctions { get; set; }
/// <summary>
/// The config name of the source list
/// </summary>
public string SourceListKey { get; set; }
public string DefaultSourceItem { get; set; }
public ushort DefaultVolume { get; set; }
/// <summary>
/// If room is off, enables power on to last source. Default true
/// </summary>
public bool EnablePowerOnToLastSource { get; set; }
string LastSourceKey;
/// <summary>
///
/// </summary>
public IBasicVolumeControls CurrentVolumeControls
{
get { return _CurrentAudioDevice; }
set
{
if (value == _CurrentAudioDevice) return;
var oldDev = _CurrentAudioDevice;
// derigister this room from the device, if it can
if (oldDev is IInUseTracking)
(oldDev as IInUseTracking).InUseTracker.RemoveUser(this, "audio");
var handler = CurrentVolumeDeviceChange;
if (handler != null)
CurrentVolumeDeviceChange(this, new VolumeDeviceChangeEventArgs(oldDev, value, ChangeType.WillChange));
_CurrentAudioDevice = value;
if (handler != null)
CurrentVolumeDeviceChange(this, new VolumeDeviceChangeEventArgs(oldDev, value, ChangeType.DidChange));
// register this room with new device, if it can
if (_CurrentAudioDevice is IInUseTracking)
(_CurrentAudioDevice as IInUseTracking).InUseTracker.AddUser(this, "audio");
}
}
IBasicVolumeControls _CurrentAudioDevice;
/// <summary>
/// The SourceListItem last run - containing names and icons
/// </summary>
public SourceListItem CurrentSourceInfo
{
get { return _CurrentSourceInfo; }
private set
{
if (value == _CurrentSourceInfo) return;
var handler = CurrentSingleSourceChange;
// remove from in-use tracker, if so equipped
if(_CurrentSourceInfo != null && _CurrentSourceInfo.SourceDevice is IInUseTracking)
(_CurrentSourceInfo.SourceDevice as IInUseTracking).InUseTracker.RemoveUser(this, "control");
if (handler != null)
handler(this, _CurrentSourceInfo, ChangeType.WillChange);
_CurrentSourceInfo = value;
// add to in-use tracking
if (_CurrentSourceInfo != null && _CurrentSourceInfo.SourceDevice is IInUseTracking)
(_CurrentSourceInfo.SourceDevice as IInUseTracking).InUseTracker.AddUser(this, "control");
if (handler != null)
handler(this, _CurrentSourceInfo, ChangeType.DidChange);
}
}
SourceListItem _CurrentSourceInfo;
public string CurrentSourceInfoKey { get; private set; }
/// <summary>
///
/// </summary>
/// <param name="key"></param>
/// <param name="name"></param>
public EssentialsHuddleSpaceRoom(string key, string name, IRoutingSinkWithSwitching defaultDisplay,
IRoutingSinkNoSwitching defaultAudio, EssentialsRoomPropertiesConfig config)
: base(key, name)
{
Config = config;
DefaultDisplay = defaultDisplay;
DefaultAudioDevice = defaultAudio;
if (defaultAudio is IBasicVolumeControls)
DefaultVolumeControls = defaultAudio as IBasicVolumeControls;
else if (defaultAudio is IHasVolumeDevice)
DefaultVolumeControls = (defaultAudio as IHasVolumeDevice).VolumeDevice;
CurrentVolumeControls = DefaultVolumeControls;
var disp = DefaultDisplay as DisplayBase;
if (disp != null)
{
// Link power, warming, cooling to display
disp.PowerIsOnFeedback.OutputChange += (o, a) =>
{
if (disp.PowerIsOnFeedback.BoolValue != OnFeedback.BoolValue)
{
if (!disp.PowerIsOnFeedback.BoolValue)
CurrentSourceInfo = null;
OnFeedback.FireUpdate();
}
};
disp.IsWarmingUpFeedback.OutputChange += (o, a) =>
{
IsWarmingUpFeedback.FireUpdate();
if (!IsWarmingUpFeedback.BoolValue)
(DefaultDisplay as IBasicVolumeWithFeedback).SetVolume(DefaultVolume);
};
disp.IsCoolingDownFeedback.OutputChange += (o, a) =>
{
IsCoolingDownFeedback.FireUpdate();
if (IsCoolingDownFeedback.BoolValue)
(DefaultDisplay as IBasicVolumeWithFeedback).SetVolume(DefaultVolume);
};
}
SourceListKey = "default";
EnablePowerOnToLastSource = true;
}
/// <summary>
///
/// </summary>
public override void Shutdown()
{
RunRouteAction("roomOff");
}
/// <summary>
/// Routes the default source item, if any
/// </summary>
public void RunDefaultRoute()
{
if (DefaultSourceItem != null)
RunRouteAction(DefaultSourceItem);
}
/// <summary>
///
/// </summary>
/// <param name="routeKey"></param>
public void RunRouteAction(string routeKey)
{
RunRouteAction(routeKey, null);
}
/// <summary>
/// Gets a source from config list SourceListKey and dynamically build and executes the
/// route or commands
/// </summary>
/// <param name="name"></param>
public void RunRouteAction(string routeKey, Action successCallback)
{
// Run this on a separate thread
new CTimer(o =>
{
Debug.Console(1, this, "Run route action '{0}'", routeKey);
var dict = ConfigReader.ConfigObject.GetSourceListForKey(SourceListKey);
if(dict == null)
{
Debug.Console(1, this, "WARNING: Config source list '{0}' not found", SourceListKey);
return;
}
// Try to get the list item by it's string key
if (!dict.ContainsKey(routeKey))
{
Debug.Console(1, this, "WARNING: No item '{0}' found on config list '{1}'",
routeKey, SourceListKey);
return;
}
var item = dict[routeKey];
//Debug.Console(2, this, "Action {0} has {1} steps",
// item.SourceKey, item.RouteList.Count);
// End usage timer on last source
if (!string.IsNullOrEmpty(LastSourceKey))
{
var lastSource = dict[LastSourceKey].SourceDevice;
try
{
if (lastSource != null && lastSource is IUsageTracking)
(lastSource as IUsageTracking).UsageTracker.EndDeviceUsage();
}
catch (Exception e)
{
Debug.Console(1, this, "*#* EXCEPTION in end usage tracking (257):\r{0}", e);
}
}
// Let's run it
if (routeKey.ToLower() != "roomoff")
{
LastSourceKey = routeKey;
}
else
{
CurrentSourceInfoKey = null;
}
foreach (var route in item.RouteList)
{
// if there is a $defaultAll on route, run two separate
if (route.DestinationKey.Equals("$defaultAll", StringComparison.OrdinalIgnoreCase))
{
// Going to assume a single-path route for now
var tempVideo = new SourceRouteListItem
{
DestinationKey = "$defaultDisplay",
SourceKey = route.SourceKey,
Type = eRoutingSignalType.Video
};
DoRoute(tempVideo);
//var tempAudio = new SourceRouteListItem
//{
// DestinationKey = "$defaultAudio",
// SourceKey = route.SourceKey,
// Type = eRoutingSignalType.Audio
//};
//DoRoute(tempAudio);
//continue; -- not sure why this was here
}
else
DoRoute(route);
}
// Start usage timer on routed source
if (item.SourceDevice is IUsageTracking)
{
(item.SourceDevice as IUsageTracking).UsageTracker.StartDeviceUsage();
}
// Set volume control on room, using default if non provided
IBasicVolumeControls volDev = null;
// Handle special cases for volume control
if (string.IsNullOrEmpty(item.VolumeControlKey)
|| item.VolumeControlKey.Equals("$defaultAudio", StringComparison.OrdinalIgnoreCase))
volDev = DefaultVolumeControls;
else if (item.VolumeControlKey.Equals("$defaultDisplay", StringComparison.OrdinalIgnoreCase))
volDev = DefaultDisplay as IBasicVolumeControls;
// Or a specific device, probably rarely used.
else
{
var dev = DeviceManager.GetDeviceForKey(item.VolumeControlKey);
if (dev is IBasicVolumeControls)
volDev = dev as IBasicVolumeControls;
else if (dev is IHasVolumeDevice)
volDev = (dev as IHasVolumeDevice).VolumeDevice;
}
CurrentVolumeControls = volDev;
// store the name and UI info for routes
if (item.SourceKey == "$off")
{
CurrentSourceInfoKey = routeKey;
CurrentSourceInfo = null;
}
else if (item.SourceKey != null)
{
CurrentSourceInfoKey = routeKey;
CurrentSourceInfo = item;
}
// And finally, set the "control". This will trigger event
//CurrentControlDevice = DeviceManager.GetDeviceForKey(item.SourceKey) as Device;
OnFeedback.FireUpdate();
// report back when done
if (successCallback != null)
successCallback();
}, 0); // end of CTimer
}
/// <summary>
/// Will power the room on with the last-used source
/// </summary>
public void PowerOnToDefaultOrLastSource()
{
if (!EnablePowerOnToLastSource || LastSourceKey == null)
return;
RunRouteAction(LastSourceKey);
}
/// <summary>
/// Does what it says
/// </summary>
public override void SetDefaultLevels()
{
Debug.Console(0, this, "SetDefaultLevels not implemented");
}
/// <summary>
///
/// </summary>
/// <param name="route"></param>
/// <returns></returns>
bool DoRoute(SourceRouteListItem route)
{
IRoutingSinkNoSwitching dest = null;
if (route.DestinationKey.Equals("$defaultaudio", StringComparison.OrdinalIgnoreCase))
dest = DefaultAudioDevice;
else if (route.DestinationKey.Equals("$defaultDisplay", StringComparison.OrdinalIgnoreCase))
dest = DefaultDisplay;
else
dest = DeviceManager.GetDeviceForKey(route.DestinationKey) as IRoutingSinkNoSwitching;
if (dest == null)
{
Debug.Console(1, this, "Cannot route, unknown destination '{0}'", route.DestinationKey);
return false;
}
if (route.SourceKey.Equals("$off", StringComparison.OrdinalIgnoreCase))
{
dest.ReleaseRoute();
if (dest is IPower)
(dest as IPower).PowerOff();
}
else
{
var source = DeviceManager.GetDeviceForKey(route.SourceKey) as IRoutingOutputs;
if (source == null)
{
Debug.Console(1, this, "Cannot route unknown source '{0}' to {1}", route.SourceKey, route.DestinationKey);
return false;
}
dest.ReleaseAndMakeRoute(source, route.Type);
}
return true;
}
public override void RoomVacatedForTimeoutPeriod(object o)
{
//Implement this
}
/// <summary>
/// Runs "roomOff" action on all rooms not set to ExcludeFromGlobalFunctions
/// </summary>
public static void AllRoomsOff()
{
var allRooms = DeviceManager.AllDevices.Where(d =>
d is EssentialsHuddleSpaceRoom && !(d as EssentialsHuddleSpaceRoom).ExcludeFromGlobalFunctions);
foreach (var room in allRooms)
(room as EssentialsHuddleSpaceRoom).RunRouteAction("roomOff");
}
}
}
/// <summary>
/// Runs "roomOff" action on all rooms not set to ExcludeFromGlobalFunctions
/// </summary>
public static void AllRoomsOff()
{
var allRooms = DeviceManager.AllDevices.Where(d =>
d is EssentialsHuddleSpaceRoom && !(d as EssentialsHuddleSpaceRoom).ExcludeFromGlobalFunctions);
foreach (var room in allRooms)
(room as EssentialsHuddleSpaceRoom).RunRouteAction("roomOff");
}
}
}

View File

@@ -227,19 +227,9 @@ namespace PepperDash.Essentials
/// 2904
/// </summary>
public const uint KeyboardButton2Press = 2904;
/// <summary>
/// 2910
/// </summary>
//public const uint KeyboardClearPress = 2910;
/// <summary>
/// 2911
/// </summary>
//public const uint KeyboardClearVisible = 2911;
// Letter joins start at 2921;
/// <summary>
/// 3101
/// </summary>
@@ -273,8 +263,6 @@ namespace PepperDash.Essentials
/// </summary>
public const uint TechSchedulerVisible = 3112;
//******************************************************
/// <summary>
/// 3811

View File

@@ -537,11 +537,9 @@ namespace PepperDash.Essentials
/// <param name="e"></param>
void ShutdownPromptTimer_HasFinished(object sender, EventArgs e)
{
//Debug.Console(2, "*#*UI shutdown prompt finished");
EndMeetingButtonSig.BoolValue = false;
CurrentRoom.ShutdownPromptTimer.TimeRemainingFeedback.OutputChange -= ShutdownPromptTimer_TimeRemainingFeedback_OutputChange;
CurrentRoom.ShutdownPromptTimer.PercentFeedback.OutputChange -= ShutdownPromptTimer_PercentFeedback_OutputChange;
}
/// <summary>
@@ -551,7 +549,6 @@ namespace PepperDash.Essentials
/// <param name="e"></param>
void ShutdownPromptTimer_WasCancelled(object sender, EventArgs e)
{
//Debug.Console(2, "*#*UI shutdown prompt cancelled");
if (PowerDownModal != null)
PowerDownModal.HideDialog();
EndMeetingButtonSig.BoolValue = false;

View File

@@ -12,6 +12,7 @@ using PepperDash.Essentials.Core;
using PepperDash.Essentials.Core.SmartObjects;
using PepperDash.Essentials.Core.Touchpanels.Keyboards;
using PepperDash.Essentials.Devices.Displays;
using PepperDash.Essentials.Room.Config;
namespace PepperDash.Essentials.UIDrivers
{
@@ -49,7 +50,7 @@ namespace PepperDash.Essentials.UIDrivers
CTimer PinAuthorizedTimer;
string Pin;
EssentialsRoomTechConfig Config;
StringBuilder PinEntryBuilder = new StringBuilder(4);
@@ -57,18 +58,16 @@ namespace PepperDash.Essentials.UIDrivers
SmartObjectNumeric PinKeypad;
/// <summary>
///
/// </summary>
/// <param name="trilist"></param>
/// <param name="parent"></param>
public EssentialsHuddleTechPageDriver(BasicTriListWithSmartObject trilist, IAVDriver parent, string pin)
public EssentialsHuddleTechPageDriver(BasicTriListWithSmartObject trilist, IAVDriver parent, EssentialsRoomTechConfig config)
: base(trilist)
{
Parent = parent;
Pin = pin;
Config = config;
PagesInterlock = new JoinedSigInterlock(trilist);
PagesInterlock.SetButDontShow(UIBoolJoin.TechSystemStatusVisible);
@@ -176,7 +175,7 @@ namespace PepperDash.Essentials.UIDrivers
// check it!
if (len == 4)
{
if (Pin == PinEntryBuilder.ToString())
if (Config.Password == PinEntryBuilder.ToString())
{
IsAuthorized = true;
SetPinDotsFeedback(0);
@@ -257,10 +256,8 @@ namespace PepperDash.Essentials.UIDrivers
d.Group.Equals("display", StringComparison.OrdinalIgnoreCase)
|| d.Group.Equals("projector", StringComparison.OrdinalIgnoreCase))
.Select(dd => dd.Key);
Debug.Console(1, "#################### Config has {0} displays", devKeys.Count());
var disps = DeviceManager.AllDevices.Where(d =>
devKeys.Contains(d.Key));
Debug.Console(1, "#################### Devices has {0} displays", disps.Count());
ushort i = 0;
foreach (var disp in disps)
{

View File

@@ -153,8 +153,7 @@ namespace PepperDash.Essentials
get
{
if (_TechDriver == null)
#warning HLV-Make PIN come from config!
_TechDriver = new PepperDash.Essentials.UIDrivers.EssentialsHuddleTechPageDriver(TriList, this, "1234");
_TechDriver = new PepperDash.Essentials.UIDrivers.EssentialsHuddleTechPageDriver(TriList, this, CurrentRoom.Config.Tech);
return _TechDriver;
}
}
@@ -390,7 +389,6 @@ namespace PepperDash.Essentials
var ss = CurrentRoom.ScheduleSource;
if (ss != null)
{
#warning HLV-Add some sort of every-minute "cron" thing to run these.
NextMeetingTimer = new CTimer(o =>
{
if (CurrentRoom.OnFeedback.BoolValue)
@@ -578,7 +576,6 @@ namespace PepperDash.Essentials
}
else // room is on show what's active or select a source if nothing is yet active
{
Debug.Console(0, "*#*#*#*# ActivitySharPressed: CurrentSourceInfoKey={0}", CurrentRoom.CurrentSourceInfoKey);
if(CurrentRoom.CurrentSourceInfo == null || CurrentRoom.CurrentSourceInfoKey == CurrentRoom.DefaultCodecRouteString)
TriList.SetBool(UIBoolJoin.SelectASourceVisible, true);
else if (CurrentSourcePageManager != null)

View File

@@ -16,9 +16,6 @@ using PepperDash.Essentials.Devices.Common.VideoCodec;
namespace PepperDash.Essentials.UIDrivers.VC
{
#warning HLV - FOR SPARK - (GFX also) we need a staging bar for in call state where there is no camera button
/// <summary>
/// This fella will likely need to interact with the room's source, although that is routed via the spark...
/// Probably needs event or FB to feed AV driver - to show two-mute volume when appropriate.
@@ -154,12 +151,10 @@ namespace PepperDash.Essentials.UIDrivers.VC
void Codec_CallStatusChange(object sender, CodecCallStatusItemChangeEventArgs e)
{
var call = e.CallItem;
Debug.Console(1, "*#* UI: Codec status {0}: {1} --> {2}", call.Name, e.PreviousStatus, e.NewStatus);
switch (e.NewStatus)
{
case eCodecCallStatus.Connected:
// fire at SRL item
Debug.Console(1, "*#* UI: Call Connected {0}", call.Name);
KeypadMode = eKeypadMode.DTMF;
DialStringBuilder.Remove(0, DialStringBuilder.Length);
DialStringFeedback.FireUpdate();
@@ -170,15 +165,12 @@ namespace PepperDash.Essentials.UIDrivers.VC
break;
case eCodecCallStatus.Connecting:
// fire at SRL item
Debug.Console(1, "*#* UI: Call Connecting {0}", call.Name);
Parent.ShowNotificationRibbon("Connecting", 0);
break;
case eCodecCallStatus.Dialing:
Debug.Console(1, "*#* UI: Call Dialing {0}", call.Name);
Parent.ShowNotificationRibbon("Dialing", 0);
break;
case eCodecCallStatus.Disconnected:
Debug.Console(1, "*#* UI: Call Disconnecting {0}", call.Name);
if (!Codec.IsInCall)
{
KeypadMode = eKeypadMode.Dial;