Merge pull request #557 from PepperDash/feature/add-fusion-joinmaps

Feature/add fusion joinmaps

.gitignore

@@ -388,3 +388,4 @@ MigrationBackup/
 
 # Fody - auto-generated XML schema
 FodyWeavers.xsd
+essentials-framework/Essentials Interfaces/PepperDash_Essentials_Interfaces/PepperDash_Essentials_Interfaces.csproj

PepperDashEssentials/Bridges/JoinMaps/DmChassisControllerJoinMap.cs

@@ -70,6 +70,14 @@ namespace PepperDash.Essentials.Bridges
         /// Range reports the highest supported HDCP state level for the corresponding input card
         /// </summary>
         public uint HdcpSupportCapability { get; set; }
+        /// <summary>
+        /// DM Chassis Stream Input Start (1), Stop (2), Pause (3) with Feedback
+        /// </summary>
+        public uint InputStreamCardStatus { get; set; }
+        /// <summary>
+        /// DM Chassis Stream Output Start (1), Stop (2), Pause (3) with Feedback
+        /// </summary>
+        public uint OutputStreamCardStatus { get; set; }
 #endregion
 
 #region Serials
@@ -115,6 +123,8 @@ namespace PepperDash.Essentials.Bridges
             InputUsb = 700; //701-899
             HdcpSupportState = 1000; //1001-1199
             HdcpSupportCapability = 1200; //1201-1399
+            InputStreamCardStatus = 1500; //1501-1532
+            OutputStreamCardStatus = 1600; //1601-1632
 
 
             //Serial
@@ -145,6 +155,8 @@ namespace PepperDash.Essentials.Bridges
             OutputEndpointOnline = OutputEndpointOnline + joinOffset;
             HdcpSupportState = HdcpSupportState + joinOffset;
             HdcpSupportCapability = HdcpSupportCapability + joinOffset;
+            InputStreamCardStatus = InputStreamCardStatus + joinOffset;
+            OutputStreamCardStatus = OutputStreamCardStatus + joinOffset;
             OutputDisabledByHdcp = OutputDisabledByHdcp + joinOffset;
             TxAdvancedIsPresent = TxAdvancedIsPresent + joinOffset;
         }

PepperDashEssentials/ControlSystem.cs

@@ -12,11 +12,11 @@ using PepperDash.Core;
 using PepperDash.Essentials.Core;
 using PepperDash.Essentials.Core.Bridges;
 using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Fusion;
 using PepperDash.Essentials.Devices.Common;
 using PepperDash.Essentials.DM;
 using PepperDash.Essentials.Fusion;
 using PepperDash.Essentials.Room.Config;
-//using PepperDash.Essentials.Room.MobileControl;
 
 using Newtonsoft.Json;
 using PepperDash.Essentials.Core.DeviceTypeInterfaces;
@@ -53,7 +53,7 @@ namespace PepperDash.Essentials
 
             if (Debug.DoNotLoadOnNextBoot)
             {
-                CrestronConsole.AddNewConsoleCommand(s => GoWithLoad(), "go", "Loads configuration file",
+                CrestronConsole.AddNewConsoleCommand(s => CrestronInvoke.BeginInvoke((o) => GoWithLoad()), "go", "Loads configuration file",
                     ConsoleAccessLevelEnum.AccessOperator);
             }
 
@@ -290,33 +290,14 @@ namespace PepperDash.Essentials
 
 			DeviceManager.ActivateAll();
 
-		    var mobileControl = DeviceManager.GetDeviceForKey("appServer") as IMobileControl;
+		    var mobileControl = GetMobileControlDevice();
 
 		    if (mobileControl == null) return;
 
             mobileControl.LinkSystemMonitorToAppServer();
-		    //LinkSystemMonitorToAppServer();
+		    
 		}
 
-        //void LinkSystemMonitorToAppServer()
-        //{
-        //    var sysMon = DeviceManager.GetDeviceForKey("systemMonitor") as PepperDash.Essentials.Core.Monitoring.SystemMonitorController;
-
-        //    var appServer = DeviceManager.GetDeviceForKey("appServer") as MobileControlSystemController;
-
-
-        //    if (sysMon != null && appServer != null)
-        //    {
-        //        var key = sysMon.Key + "-" + appServer.Key;
-        //        var messenger = new PepperDash.Essentials.AppServer.Messengers.SystemMonitorMessenger
-        //            (key, sysMon, "/device/systemMonitor");
-
-        //        messenger.RegisterWithAppServer(appServer);
-
-        //        DeviceManager.AddDevice(messenger);
-        //    }
-        //}
-
         /// <summary>
         /// Reads all devices from config and adds them to DeviceManager
         /// </summary>
@@ -394,11 +375,6 @@ namespace PepperDash.Essentials
                     if (newDev == null)
                         newDev = PepperDash.Essentials.Core.DeviceFactory.GetDevice(devConf);
 
-                    //
-                    //if (newDev == null)
-                    //    newDev = PepperDash.Essentials.Devices.Displays.DisplayDeviceFactory.GetDevice(devConf);
-                    //
-
 					if (newDev != null)
 						DeviceManager.AddDevice(newDev);
 					else
@@ -456,19 +432,34 @@ namespace PepperDash.Essentials
                 var room = EssentialsRoomConfigHelper.GetRoomObject(roomConfig) as EssentialsRoomBase;
                 if (room != null)
                 {
+                    // default IPID
+                    uint fusionIpId = 0xf1;
+
+                    // default to no join map key
+                    string fusionJoinMapKey = string.Empty;
+
+                    if (room.Config.Properties["fusion"] != null)
+                    {
+                        Debug.Console(2, "Custom Fusion config found. Using custom values");
+
+                        var fusionConfig = room.Config.Properties["fusion"].ToObject<EssentialsRoomFusionConfig>();
+
+                        if (fusionConfig != null)
+                        {
+                            fusionIpId = fusionConfig.IpIdInt;
+                            fusionJoinMapKey = fusionConfig.JoinMapKey;
+                        }
+                    }
+
                     if (room is EssentialsHuddleSpaceRoom)
                     {
                         DeviceManager.AddDevice(room);
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Room is EssentialsHuddleSpaceRoom, attempting to add to DeviceManager with Fusion");
-                        DeviceManager.AddDevice(new Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase((EssentialsHuddleSpaceRoom)room, 0xf1));
+                        DeviceManager.AddDevice(new Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase(room, fusionIpId, fusionJoinMapKey));
 
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to build Mobile Control Bridge...");
-                        // Mobile Control bridge
-                        //var bridge = new MobileConrolEssentialsHuddleSpaceRoomBridge(room as EssentialsHuddleSpaceRoom);
-                        //AddBridgePostActivationHelper(bridge); // Lets things happen later when all devices are present
-                        //DeviceManager.AddDevice(bridge);
 
                         CreateMobileControlBridge(room);
                     }
@@ -477,13 +468,21 @@ namespace PepperDash.Essentials
                         DeviceManager.AddDevice(room);
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Room is EssentialsHuddleVtc1Room, attempting to add to DeviceManager with Fusion");
-                        DeviceManager.AddDevice(new EssentialsHuddleVtc1FusionController((EssentialsHuddleVtc1Room)room, 0xf1));
+                        DeviceManager.AddDevice(new EssentialsHuddleVtc1FusionController((EssentialsHuddleVtc1Room)room, fusionIpId, fusionJoinMapKey));
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to build Mobile Control Bridge...");
-                        // Mobile Control bridge
-                        //var bridge = new MobileConrolEssentialsHuddleSpaceRoomBridge(room);
-                        //AddBridgePostActivationHelper(bridge); // Lets things happen later when all devices are present
-                        //DeviceManager.AddDevice(bridge);
+
+                        CreateMobileControlBridge(room);
+                    }
+                    else if (room is EssentialsTechRoom)
+                    {
+                        DeviceManager.AddDevice(room);
+
+                        Debug.Console(0, Debug.ErrorLogLevel.Notice,
+                            "Room is EssentialsTechRoom, Attempting to add to DeviceManager with Fusion");
+                        DeviceManager.AddDevice(new EssentialsTechRoomFusionSystemController((EssentialsTechRoom)room, fusionIpId, fusionJoinMapKey));
+
+                        Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to build Mobile Control Bridge");
 
                         CreateMobileControlBridge(room);
                     }
@@ -504,34 +503,35 @@ namespace PepperDash.Essentials
 
         private static void CreateMobileControlBridge(EssentialsRoomBase room)
         {
-            var mobileControl = DeviceManager.GetDeviceForKey("appServer") as IMobileControl;
+            var mobileControl = GetMobileControlDevice();
 
             if (mobileControl == null) return;
 
-            mobileControl.CreateMobileControlRoomBridge(room);
+            mobileControl.CreateMobileControlRoomBridge(room, mobileControl);
 
             Debug.Console(0, Debug.ErrorLogLevel.Notice, "Mobile Control Bridge Added...");
         }
 
-        /// <summary>
-        /// Helps add the post activation steps that link bridges to main controller
-        /// </summary>
-        /// <param name="bridge"></param>
-        //void AddBridgePostActivationHelper(MobileControlBridgeBase bridge)
-        //{
-        //    bridge.AddPostActivationAction(() =>
-        //    {
-        //        var parent = DeviceManager.AllDevices.FirstOrDefault(d => d.Key == "appServer") as MobileControlSystemController;
-        //        if (parent == null)
-        //        {
-        //            Debug.Console(0, bridge, "ERROR: Cannot connect app server room bridge. System controller not present");
-        //            return;
-        //        }
-        //        Debug.Console(0, bridge, "Linking to parent controller");
-        //        bridge.AddParent(parent);
-        //        parent.AddBridge(bridge);
-        //    });
-        //}
+        private static IMobileControl GetMobileControlDevice()
+        {
+            var mobileControlList = DeviceManager.AllDevices.OfType<IMobileControl>().ToList();
+
+            if (mobileControlList.Count > 1)
+            {
+                Debug.Console(0, Debug.ErrorLogLevel.Warning,
+                    "Multiple instances of Mobile Control Server found.");
+
+                return null;
+            }
+
+            if (mobileControlList.Count > 0)
+            {
+                return mobileControlList[0];
+            }
+
+            Debug.Console(0, Debug.ErrorLogLevel.Notice, "Mobile Control not enabled for this system");
+            return null;
+        }
 
         /// <summary>
         /// Fires up a logo server if not already running
@@ -568,23 +568,31 @@ namespace PepperDash.Essentials
             string logoLight = null;
             string logo = null;
 
-            if (c.Properties["logoDark"] != null)
+            try
             {
-                logoDark = c.Properties["logoDark"].Value<string>("type");
-            }
+                if (c.Properties["logoDark"] != null)
+                {
+                    logoDark = c.Properties["logoDark"].Value<string>("type");
+                }
 
-            if (c.Properties["logoLight"] != null)
+                if (c.Properties["logoLight"] != null)
+                {
+                    logoLight = c.Properties["logoLight"].Value<string>("type");
+                }
+
+                if (c.Properties["logo"] != null)
+                {
+                    logo = c.Properties["logo"].Value<string>("type");
+                }
+
+                return ((logoDark != null && logoDark == "system") ||
+                        (logoLight != null && logoLight == "system") || (logo != null && logo == "system"));
+            }
+            catch
             {
-                logoLight = c.Properties["logoLight"].Value<string>("type");
+                Debug.Console(1, Debug.ErrorLogLevel.Notice, "Unable to find logo information in any room config");
+                return false;
             }
-
-            if (c.Properties["logo"] != null)
-            {
-                logo = c.Properties["logo"].Value<string>("type");
-            }
-
-            return ((logoDark != null && logoDark == "system") ||
-                    (logoLight != null && logoLight == "system") || (logo != null && logo == "system"));
         }
     }
 }

PepperDashEssentials/Fusion/EssentialsHuddleVtc1FusionController.cs

@@ -16,8 +16,8 @@ namespace PepperDash.Essentials.Fusion
     {
         BooleanSigData CodecIsInCall;
 
-        public EssentialsHuddleVtc1FusionController(EssentialsHuddleVtc1Room room, uint ipId)
-            : base(room, ipId)
+        public EssentialsHuddleVtc1FusionController(EssentialsHuddleVtc1Room room, uint ipId, string joinMapKey)
+            : base(room, ipId, joinMapKey)
         {
 
         }
@@ -55,25 +55,25 @@ namespace PepperDash.Essentials.Fusion
                 // Map FusionRoom Attributes:
 
                 // Codec volume
-                var codecVolume = FusionRoom.CreateOffsetUshortSig(50, "Volume - Fader01", eSigIoMask.InputOutputSig);
+                var codecVolume = FusionRoom.CreateOffsetUshortSig(JoinMap.VolumeFader1.JoinNumber, JoinMap.VolumeFader1.AttributeName, eSigIoMask.InputOutputSig);
                 codecVolume.OutputSig.UserObject = new Action<ushort>(b => (codec as IBasicVolumeWithFeedback).SetVolume(b));
                 (codec as IBasicVolumeWithFeedback).VolumeLevelFeedback.LinkInputSig(codecVolume.InputSig);
 
                 // In Call Status
-                CodecIsInCall = FusionRoom.CreateOffsetBoolSig(69, "Conf - VC 1 In Call", eSigIoMask.InputSigOnly);
+                CodecIsInCall = FusionRoom.CreateOffsetBoolSig(JoinMap.VcCodecInCall.JoinNumber, JoinMap.VcCodecInCall.AttributeName, eSigIoMask.InputSigOnly);
                 codec.CallStatusChange += new EventHandler<PepperDash.Essentials.Devices.Common.Codec.CodecCallStatusItemChangeEventArgs>(codec_CallStatusChange);
                 
                 // Online status
                 if (codec is ICommunicationMonitor)
                 {
                     var c = codec as ICommunicationMonitor;
-                    var codecOnline = FusionRoom.CreateOffsetBoolSig(122, "Online - VC 1", eSigIoMask.InputSigOnly);
+                    var codecOnline = FusionRoom.CreateOffsetBoolSig(JoinMap.VcCodecOnline.JoinNumber, JoinMap.VcCodecOnline.AttributeName, eSigIoMask.InputSigOnly);
                     codecOnline.InputSig.BoolValue = c.CommunicationMonitor.Status == MonitorStatus.IsOk;
                     c.CommunicationMonitor.StatusChange += (o, a) =>
                         {
                             codecOnline.InputSig.BoolValue = a.Status == MonitorStatus.IsOk;
                         };
-                    Debug.Console(0, this, "Linking '{0}' communication monitor to Fusion '{1}'", codec.Key, "Online - VC 1");
+                    Debug.Console(0, this, "Linking '{0}' communication monitor to Fusion '{1}'", codec.Key, JoinMap.VcCodecOnline.AttributeName);
                 }
 
                 // Codec IP Address
@@ -101,10 +101,10 @@ namespace PepperDash.Essentials.Fusion
 
                 if (codecHasIpInfo)
                 {
-                    codecIpAddressSig = FusionRoom.CreateOffsetStringSig(121, "IP Address - VC", eSigIoMask.InputSigOnly);
+                    codecIpAddressSig = FusionRoom.CreateOffsetStringSig(JoinMap.VcCodecIpAddress.JoinNumber, JoinMap.VcCodecIpAddress.AttributeName, eSigIoMask.InputSigOnly);
                     codecIpAddressSig.InputSig.StringValue = codecIpAddress;
 
-                    codecIpPortSig = FusionRoom.CreateOffsetStringSig(150, "IP Port - VC", eSigIoMask.InputSigOnly);
+                    codecIpPortSig = FusionRoom.CreateOffsetStringSig(JoinMap.VcCodecIpPort.JoinNumber, JoinMap.VcCodecIpPort.AttributeName, eSigIoMask.InputSigOnly);
                     codecIpPortSig.InputSig.StringValue = codecIpPort.ToString();
                 }
 
@@ -123,7 +123,7 @@ namespace PepperDash.Essentials.Fusion
                     FusionStaticAssets.Add(deviceConfig.Uid, tempAsset);
                 }
 
-                var codecAsset = FusionRoom.CreateStaticAsset(tempAsset.SlotNumber, tempAsset.Name, "Display", tempAsset.InstanceId);
+                var codecAsset = FusionRoom.CreateStaticAsset(tempAsset.SlotNumber, tempAsset.Name, "Codec", tempAsset.InstanceId);
                 codecAsset.PowerOn.OutputSig.UserObject = codecPowerOnAction;
                 codecAsset.PowerOff.OutputSig.UserObject = codecPowerOffAction;
                 codec.StandbyIsOnFeedback.LinkComplementInputSig(codecAsset.PowerOn.InputSig);
@@ -166,20 +166,19 @@ namespace PepperDash.Essentials.Fusion
 
             CrestronConsole.AddNewConsoleCommand(RequestFullRoomSchedule, "FusReqRoomSchedule", "Requests schedule of the room for the next 24 hours", ConsoleAccessLevelEnum.AccessOperator);
             CrestronConsole.AddNewConsoleCommand(ModifyMeetingEndTimeConsoleHelper, "FusReqRoomSchMod", "Ends or extends a meeting by the specified time", ConsoleAccessLevelEnum.AccessOperator);
-            CrestronConsole.AddNewConsoleCommand(CreateAsHocMeeting, "FusCreateMeeting", "Creates and Ad Hoc meeting for on hour or until the next meeting", ConsoleAccessLevelEnum.AccessOperator);
+            CrestronConsole.AddNewConsoleCommand(CreateAdHocMeeting, "FusCreateMeeting", "Creates and Ad Hoc meeting for on hour or until the next meeting", ConsoleAccessLevelEnum.AccessOperator);
 
             // Room to fusion room
             Room.OnFeedback.LinkInputSig(FusionRoom.SystemPowerOn.InputSig);
 
             // Moved to 
-            CurrentRoomSourceNameSig = FusionRoom.CreateOffsetStringSig(84, "Display 1 - Current Source", eSigIoMask.InputSigOnly);
+            CurrentRoomSourceNameSig = FusionRoom.CreateOffsetStringSig(JoinMap.Display1CurrentSourceName.JoinNumber, JoinMap.Display1CurrentSourceName.AttributeName, eSigIoMask.InputSigOnly);
             // Don't think we need to get current status of this as nothing should be alive yet. 
             (Room as EssentialsHuddleVtc1Room).CurrentSourceChange += Room_CurrentSourceInfoChange;
 
 
             FusionRoom.SystemPowerOn.OutputSig.SetSigFalseAction((Room as EssentialsHuddleVtc1Room).PowerOnToDefaultOrLastSource);
             FusionRoom.SystemPowerOff.OutputSig.SetSigFalseAction(() => (Room as EssentialsHuddleVtc1Room).RunRouteAction("roomOff", Room.SourceListKey));
-            // NO!! room.RoomIsOn.LinkComplementInputSig(FusionRoom.SystemPowerOff.InputSig);
  
 
             CrestronEnvironment.EthernetEventHandler += CrestronEnvironment_EthernetEventHandler;
@@ -197,9 +196,9 @@ namespace PepperDash.Essentials.Fusion
                 uint i = 1;
                 foreach (var kvp in setTopBoxes)
                 {
-                    TryAddRouteActionSigs("Display 1 - Source TV " + i, 188 + i, kvp.Key, kvp.Value.SourceDevice);
+                    TryAddRouteActionSigs(JoinMap.Display1DiscPlayerSourceStart.AttributeName + " " + i, JoinMap.Display1DiscPlayerSourceStart.JoinNumber + i, kvp.Key, kvp.Value.SourceDevice);
                     i++;
-                    if (i > 5) // We only have five spots
+                    if (i > JoinMap.Display1SetTopBoxSourceStart.JoinSpan) // We only have five spots
                         break;
                 }
 
@@ -207,7 +206,7 @@ namespace PepperDash.Essentials.Fusion
                 i = 1;
                 foreach (var kvp in discPlayers)
                 {
-                    TryAddRouteActionSigs("Display 1 - Source DVD " + i, 181 + i, kvp.Key, kvp.Value.SourceDevice);
+                    TryAddRouteActionSigs(JoinMap.Display1DiscPlayerSourceStart.AttributeName + " " + i, JoinMap.Display1DiscPlayerSourceStart.JoinNumber + i, kvp.Key, kvp.Value.SourceDevice);
                     i++;
                     if (i > 5) // We only have five spots
                         break;
@@ -217,9 +216,9 @@ namespace PepperDash.Essentials.Fusion
                 i = 1;
                 foreach (var kvp in laptops)
                 {
-                    TryAddRouteActionSigs("Display 1 - Source Laptop " + i, 166 + i, kvp.Key, kvp.Value.SourceDevice);
+                    TryAddRouteActionSigs(JoinMap.Display1LaptopSourceStart.AttributeName + " " + i, JoinMap.Display1LaptopSourceStart.JoinNumber + i, kvp.Key, kvp.Value.SourceDevice);
                     i++;
-                    if (i > 10) // We only have ten spots???
+                    if (i > JoinMap.Display1LaptopSourceStart.JoinSpan) // We only have ten spots???
                         break;
                 }
 
@@ -283,7 +282,7 @@ namespace PepperDash.Essentials.Fusion
                 if (defaultDisplay is IDisplayUsage)
                     (defaultDisplay as IDisplayUsage).LampHours.LinkInputSig(FusionRoom.DisplayUsage.InputSig);
 
-                MapDisplayToRoomJoins(1, 158, defaultDisplay);
+                MapDisplayToRoomJoins(1, JoinMap.Display1Start.JoinNumber, defaultDisplay);
 
                 var deviceConfig = ConfigReader.ConfigObject.Devices.FirstOrDefault(d => d.Key.Equals(defaultDisplay.Key));
 
@@ -328,7 +327,7 @@ namespace PepperDash.Essentials.Fusion
 
         }
 
-        protected override void MapDisplayToRoomJoins(int displayIndex, int joinOffset, DisplayBase display)
+        protected override void MapDisplayToRoomJoins(int displayIndex, uint joinOffset, DisplayBase display)
         {
             string displayName = string.Format("Display {0} - ", displayIndex);
 

PepperDashEssentials/Fusion/EssentialsTechRoomFusionSystemController.cs

@@ -0,0 +1,98 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+
+using PepperDash.Core;
+using PepperDash.Essentials.Core;
+using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Fusion;
+
+namespace PepperDash.Essentials.Fusion
+{
+    public class EssentialsTechRoomFusionSystemController : EssentialsHuddleSpaceFusionSystemControllerBase
+    {
+        public EssentialsTechRoomFusionSystemController(EssentialsTechRoom room, uint ipId, string joinMapKey)
+            : base(room, ipId, joinMapKey)
+        {
+
+        }
+
+        protected override void SetUpDisplay()
+        {
+            try
+            {
+
+                var displays = (Room as EssentialsTechRoom).Displays;
+
+                Debug.Console(1, this, "Setting up Static Assets for {0} Displays", displays.Count);
+
+                foreach (var display in displays.Values.Cast<DisplayBase>())
+                {
+                    Debug.Console(2, this, "Setting up Static Asset for {0}", display.Key);
+
+                    display.UsageTracker = new UsageTracking(display) { UsageIsTracked = true };
+                    display.UsageTracker.DeviceUsageEnded += UsageTracker_DeviceUsageEnded;
+
+                    var dispPowerOnAction = new Action<bool>(b =>
+                    {
+                        if (!b)
+                        {
+                            display.PowerOn();
+                        }
+                    });
+                    var dispPowerOffAction = new Action<bool>(b =>
+                    {
+                        if (!b)
+                        {
+                            display.PowerOff();
+                        }
+                    });
+
+                    var deviceConfig = ConfigReader.ConfigObject.GetDeviceForKey(display.Key);
+
+                    FusionAsset tempAsset;
+
+                    if (FusionStaticAssets.ContainsKey(deviceConfig.Uid))
+                    {
+                        // Used existing asset
+                        tempAsset = FusionStaticAssets[deviceConfig.Uid];
+                    }
+                    else
+                    {
+                        // Create a new asset
+                        tempAsset = new FusionAsset(FusionRoomGuids.GetNextAvailableAssetNumber(FusionRoom),
+                            display.Name, "Display", "");
+                        FusionStaticAssets.Add(deviceConfig.Uid, tempAsset);
+                    }
+
+                    var dispAsset = FusionRoom.CreateStaticAsset(tempAsset.SlotNumber, tempAsset.Name, "Display",
+                        tempAsset.InstanceId);
+                    dispAsset.PowerOn.OutputSig.UserObject = dispPowerOnAction;
+                    dispAsset.PowerOff.OutputSig.UserObject = dispPowerOffAction;
+
+                    var defaultTwoWayDisplay = display as IHasPowerControlWithFeedback;
+                    if (defaultTwoWayDisplay != null)
+                    {
+                        defaultTwoWayDisplay.PowerIsOnFeedback.LinkInputSig(FusionRoom.DisplayPowerOn.InputSig);
+                        if (display is IDisplayUsage)
+                        {
+                            (display as IDisplayUsage).LampHours.LinkInputSig(FusionRoom.DisplayUsage.InputSig);
+                        }
+
+                        defaultTwoWayDisplay.PowerIsOnFeedback.LinkInputSig(dispAsset.PowerOn.InputSig);
+                    }
+
+                    // Use extension methods
+                    dispAsset.TrySetMakeModel(display);
+                    dispAsset.TryLinkAssetErrorToCommunication(display);
+                }
+            }
+            catch (Exception e)
+            {
+                Debug.Console(1, this, "Error setting up displays in Fusion: {0}", e);
+            }
+        }
+    }
+}

PepperDashEssentials/PepperDashEssentials.csproj

@@ -133,6 +133,7 @@
     <Compile Include="Devices\Amplifier.cs" />
     <Compile Include="ControlSystem.cs" />
     <Compile Include="Fusion\EssentialsHuddleVtc1FusionController.cs" />
+    <Compile Include="Fusion\EssentialsTechRoomFusionSystemController.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
     <Compile Include="Room\Config\EssentialsDualDisplayRoomPropertiesConfig.cs" />
     <Compile Include="Room\Config\EssentialsNDisplayRoomPropertiesConfig.cs" />
@@ -141,11 +142,13 @@
     <Compile Include="Room\Config\EssentialsHuddleRoomPropertiesConfig.cs" />
     <Compile Include="Room\Config\EssentialsHuddleVtc1PropertiesConfig.cs" />
     <Compile Include="Room\Config\EssentialsRoomEmergencyConfig.cs" />
+    <Compile Include="Room\Config\EssentialsTechRoomConfig.cs" />
     <Compile Include="Room\Emergency\EsentialsRoomEmergencyContactClosure.cs" />
     <Compile Include="Room\Types\EssentialsDualDisplayRoom.cs" />
     <Compile Include="Room\Types\EssentialsHuddleVtc1Room.cs" />
     <Compile Include="Room\Types\EssentialsNDisplayRoomBase.cs" />
     <Compile Include="Room\Config\EssentialsRoomConfig.cs" />
+    <Compile Include="Room\Types\EssentialsTechRoom.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsEnvironmentDriver.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsLightingDriver.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsShadeDriver.cs" />

PepperDashEssentials/Room/Config/EssentialsRoomConfig.cs

@@ -22,30 +22,25 @@ namespace PepperDash.Essentials.Room.Config
 		public static Device GetRoomObject(DeviceConfig roomConfig)
 		{
 			var typeName = roomConfig.Type.ToLower();
+
 			if (typeName == "huddle")
 			{
-                var huddle = new EssentialsHuddleSpaceRoom(roomConfig);
-
-                return huddle;
+                return new EssentialsHuddleSpaceRoom(roomConfig);
 			}
-            else if (typeName == "huddlevtc1")
-            {
-                var rm = new EssentialsHuddleVtc1Room(roomConfig);
-                
-                return rm;
-            }
-			else if (typeName == "ddvc01Bridge")
-			{
-				return new Device(roomConfig.Key, roomConfig.Name); // placeholder device that does nothing.
-			}
-            else if (typeName == "dualdisplay")
-            {
-                var rm = new EssentialsDualDisplayRoom(roomConfig);
+		    if (typeName == "huddlevtc1")
+		    {
+		        return new EssentialsHuddleVtc1Room(roomConfig);
+		    }
+		    if (typeName == "ddvc01bridge")
+		    {
+		        return new Device(roomConfig.Key, roomConfig.Name); // placeholder device that does nothing.
+		    }
+		    if (typeName == "dualdisplay")
+		    {
+		        return new EssentialsDualDisplayRoom(roomConfig);
+		    }
 
-                return rm;
-            }
-
-            return null;
+		    return typeName != "techroom" ? null : new EssentialsTechRoom(roomConfig);
 		}
 
         /// <summary>
@@ -182,6 +177,9 @@ namespace PepperDash.Essentials.Room.Config
 		[JsonProperty("volumes")]
 		public EssentialsRoomVolumesConfig Volumes { get; set; }
 
+        [JsonProperty("fusion")]
+        public EssentialsRoomFusionConfig Fusion { get; set; }
+
 		[JsonProperty("zeroVolumeWhenSwtichingVolumeDevices")]
 		public bool ZeroVolumeWhenSwtichingVolumeDevices { get; set; }
 
@@ -225,6 +223,32 @@ namespace PepperDash.Essentials.Room.Config
 
 	}
 
+    public class EssentialsRoomFusionConfig
+    {
+        public uint IpIdInt
+        {
+            get
+            {
+                try 
+                {
+                    return Convert.ToUInt32(IpId, 16);
+                }
+                catch (Exception)
+                {
+                    throw new FormatException(string.Format("ERROR:Unable to convert IP ID: {0} to hex.  Error:\n{1}", IpId));
+                }
+          
+            }
+        }
+
+        [JsonProperty("ipId")]
+        public string IpId { get; set; }
+
+        [JsonProperty("joinMapKey")]
+        public string JoinMapKey { get; set; }
+
+    }
+
     public class EssentialsRoomMicrophonePrivacyConfig
     {
 		[JsonProperty("deviceKey")]

PepperDashEssentials/Room/Config/EssentialsTechRoomConfig.cs

@@ -0,0 +1,40 @@
+using System.Collections.Generic;
+using Newtonsoft.Json;
+
+namespace PepperDash.Essentials.Room.Config
+{
+    public class EssentialsTechRoomConfig
+    {
+        [JsonProperty("dummySourceKey")]
+        public string DummySourceKey { get; set; }
+
+        [JsonProperty("displays")]
+        public List<string> Displays;
+        
+        [JsonProperty("tuners")]
+        public List<string> Tuners;
+
+        [JsonProperty("userPin")]
+        public string UserPin;
+
+        [JsonProperty("techPin")]
+        public string TechPin;
+
+        [JsonProperty("presetsFileName")]
+        public string PresetsFileName;
+
+        [JsonProperty("scheduledEvents")]
+        public List<ScheduledEventConfig> ScheduledEvents;
+
+        [JsonProperty("isPrimary")] public bool IsPrimary;
+
+        [JsonProperty("isTvPresetsProvider")] public bool IsTvPresetsProvider;
+
+        public EssentialsTechRoomConfig()
+        {
+            Displays = new List<string>();
+            Tuners = new List<string>();
+            ScheduledEvents = new List<ScheduledEventConfig>();
+        }
+    }
+}

PepperDashEssentials/Room/Types/EssentialsHuddleVtc1Room.cs

@@ -393,6 +393,8 @@ namespace PepperDash.Essentials
             Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Shutting down room");
 
             RunRouteAction("roomOff");
+            VideoCodec.StopSharing();
+            VideoCodec.StandbyActivate();
         }
 
         /// <summary>
@@ -590,6 +592,19 @@ namespace PepperDash.Essentials
 
                     OnFeedback.FireUpdate();
 
+                    if (OnFeedback.BoolValue)
+                    {
+                        if (VideoCodec.UsageTracker.InUseTracker.InUseFeedback.BoolValue)
+                        {
+                            Debug.Console(1, this, "Video Codec in use, deactivating standby on codec");
+                        }
+
+                        if (VideoCodec.StandbyIsOnFeedback.BoolValue)
+                        {
+                            VideoCodec.StandbyDeactivate();
+                        }
+                    }
+
                     // report back when done
                     if (successCallback != null)
                         successCallback();
@@ -652,6 +667,7 @@ namespace PepperDash.Essentials
 				dest.ReleaseRoute();
                 if (dest is IHasPowerControl)
                     (dest as IHasPowerControl).PowerOff();
+
 			}
 			else
 			{
@@ -703,37 +719,44 @@ namespace PepperDash.Essentials
 		}
 
 
-		/// <summary>
-		/// Setup the external sources for the Cisco Touch 10 devices that support IHasExternalSourceSwitch
-		/// </summary>
-		private void SetCodecExternalSources()
-		{
-			var videoCodecWithExternalSwitching = VideoCodec as IHasExternalSourceSwitching;
+        /// <summary>
+        /// Setup the external sources for the Cisco Touch 10 devices that support IHasExternalSourceSwitch
+        /// </summary>
+        private void SetCodecExternalSources()
+        {
+            var videoCodecWithExternalSwitching = VideoCodec as IHasExternalSourceSwitching;
 
-			if (videoCodecWithExternalSwitching == null)
-			{
-				return;
-			}
+            if (videoCodecWithExternalSwitching == null || !videoCodecWithExternalSwitching.ExternalSourceListEnabled)
+            {
+                return;
+            }
 
-		    string codecTieLine = ConfigReader.ConfigObject.TieLines.SingleOrDefault(x => x.DestinationKey == VideoCodec.Key).DestinationPort;
-		    videoCodecWithExternalSwitching.ClearExternalSources();
-		    videoCodecWithExternalSwitching.RunRouteAction = RunRouteAction;
-		    var srcList = ConfigReader.ConfigObject.SourceLists.SingleOrDefault(x => x.Key == SourceListKey).Value.OrderBy(kv => kv.Value.Order); ;
+            try
+            {
+                // Get the tie line that the external switcher is connected to
+                string codecInputConnectorName = ConfigReader.ConfigObject.TieLines.SingleOrDefault(
+                    x => x.DestinationKey == VideoCodec.Key && x.DestinationPort == videoCodecWithExternalSwitching.ExternalSourceInputPort).DestinationPort;
 
-		    foreach (var kvp in srcList)
-		    {
-		        var srcConfig = kvp.Value;
+                videoCodecWithExternalSwitching.ClearExternalSources();
+                videoCodecWithExternalSwitching.RunRouteAction = RunRouteAction;
+                var srcList = ConfigReader.ConfigObject.SourceLists.SingleOrDefault(x => x.Key == SourceListKey).Value.OrderBy(kv => kv.Value.Order); ;
 
-		        if (kvp.Key != DefaultCodecRouteString && kvp.Key != "roomOff")
-		        {
+                foreach (var kvp in srcList)
+                {
+                    var srcConfig = kvp.Value;
 
-		            videoCodecWithExternalSwitching.AddExternalSource(codecTieLine, kvp.Key, srcConfig.PreferredName, PepperDash.Essentials.Devices.Common.VideoCodec.Cisco.eExternalSourceType.desktop);
-		            videoCodecWithExternalSwitching.SetExternalSourceState(kvp.Key, PepperDash.Essentials.Devices.Common.VideoCodec.Cisco.eExternalSourceMode.Ready);
-
-
-		        }
-		    }
-		}
+                    if (kvp.Key != DefaultCodecRouteString && kvp.Key != "roomOff")
+                    {
+                        videoCodecWithExternalSwitching.AddExternalSource(codecInputConnectorName, kvp.Key, srcConfig.PreferredName, PepperDash.Essentials.Devices.Common.VideoCodec.Cisco.eExternalSourceType.desktop);
+                        videoCodecWithExternalSwitching.SetExternalSourceState(kvp.Key, PepperDash.Essentials.Devices.Common.VideoCodec.Cisco.eExternalSourceMode.Ready);
+                    }
+                }
+            }
+            catch (Exception e)
+            {
+                Debug.Console(2, this, "Error setting codec external sources: {0}", e);
+            }
+        }
 
         private void SetCodecBranding()
         {

PepperDashEssentials/Room/Types/EssentialsTechRoom.cs

@@ -0,0 +1,473 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using Crestron.SimplSharp;
+using Crestron.SimplSharp.Scheduler;
+using Crestron.SimplSharpPro.DeviceSupport;
+using Newtonsoft.Json;
+using Newtonsoft.Json.Linq;
+using PepperDash.Core;
+using PepperDash.Essentials.Core;
+using PepperDash.Essentials.Core.Bridges;
+using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.DeviceTypeInterfaces;
+using PepperDash.Essentials.Core.Presets;
+using PepperDash.Essentials.Devices.Common;
+using PepperDash.Essentials.Room.Config;
+
+namespace PepperDash.Essentials
+{
+    public class EssentialsTechRoom : EssentialsRoomBase, ITvPresetsProvider, IBridgeAdvanced, IRunDirectRouteAction
+    {
+        private readonly EssentialsTechRoomConfig _config;
+        private readonly Dictionary<string, TwoWayDisplayBase> _displays;
+
+        private readonly DevicePresetsModel _tunerPresets;
+        private readonly Dictionary<string, IRSetTopBoxBase> _tuners;
+
+        private Dictionary<string, string> _currentPresets;
+        private ScheduledEventGroup _roomScheduledEventGroup;
+
+        /// <summary>
+        /// 
+        /// </summary>
+        protected override Func<bool> IsWarmingFeedbackFunc
+        {
+            get
+            {
+                return () =>
+                {
+                    return _displays.All(kv => kv.Value.IsWarmingUpFeedback.BoolValue);
+                };
+            }
+        }
+        /// <summary>
+        /// 
+        /// </summary>
+        protected override Func<bool> IsCoolingFeedbackFunc
+        {
+            get
+            {
+                return () =>
+                {
+                    return _displays.All(kv => kv.Value.IsCoolingDownFeedback.BoolValue);
+                };
+            }
+        }
+
+        public EssentialsTechRoom(DeviceConfig config) : base(config)
+        {
+            _config = config.Properties.ToObject<EssentialsTechRoomConfig>();
+
+            _tunerPresets = new DevicePresetsModel(String.Format("{0}-presets", config.Key), _config.PresetsFileName);
+
+            _tunerPresets.SetFileName(_config.PresetsFileName);
+
+            _tunerPresets.PresetRecalled += TunerPresetsOnPresetRecalled;
+
+            _tuners = GetDevices<IRSetTopBoxBase>(_config.Tuners);
+            _displays = GetDevices<TwoWayDisplayBase>(_config.Displays);
+
+            RoomPowerIsOnFeedback = new BoolFeedback(() => RoomPowerIsOn);
+
+            SetUpTunerPresetsFeedback();
+
+            SubscribeToDisplayFeedbacks();
+
+            CreateOrUpdateScheduledEvents();
+        }
+
+        public Dictionary<string, StringFeedback> CurrentPresetsFeedbacks { get; private set; }
+
+        public Dictionary<string, IRSetTopBoxBase> Tuners
+        {
+            get { return _tuners; }
+        }
+
+        public Dictionary<string, TwoWayDisplayBase> Displays
+        {
+            get { return _displays; }
+        }
+
+        public BoolFeedback RoomPowerIsOnFeedback { get; private set; }
+
+        public bool RoomPowerIsOn
+        {
+            get { return _displays.All(kv => kv.Value.PowerIsOnFeedback.BoolValue); }
+        }
+
+        #region ITvPresetsProvider Members
+
+        public DevicePresetsModel TvPresets
+        {
+            get { return _tunerPresets; }
+        }
+
+        #endregion
+
+        private void TunerPresetsOnPresetRecalled(ISetTopBoxNumericKeypad device, string channel)
+        {
+            if (!_currentPresets.ContainsKey(device.Key))
+            {
+                return;
+            }
+
+            _currentPresets[device.Key] = channel;
+
+            if (!CurrentPresetsFeedbacks.ContainsKey(device.Key))
+            {
+                CurrentPresetsFeedbacks[device.Key].FireUpdate();
+            }
+        }
+
+        private void SetUpTunerPresetsFeedback()
+        {
+            _currentPresets = new Dictionary<string, string>();
+            CurrentPresetsFeedbacks = new Dictionary<string, StringFeedback>();
+
+            foreach (var setTopBox in _tuners)
+            {
+                var tuner = setTopBox.Value;
+                _currentPresets.Add(tuner.Key, String.Empty);
+                CurrentPresetsFeedbacks.Add(tuner.Key, new StringFeedback(() => _currentPresets[tuner.Key]));
+            }
+        }
+
+        private void SubscribeToDisplayFeedbacks()
+        {
+            foreach (var display in _displays)
+            {
+                display.Value.PowerIsOnFeedback.OutputChange +=
+                    (sender, args) =>
+                    {
+                        RoomPowerIsOnFeedback.InvokeFireUpdate();
+                        IsWarmingUpFeedback.InvokeFireUpdate();
+                        IsCoolingDownFeedback.InvokeFireUpdate();
+                    };
+            }
+        }
+
+        private void CreateOrUpdateScheduledEvents()
+        {
+            var eventsConfig = _config.ScheduledEvents;
+
+            GetOrCreateScheduleGroup();
+
+            foreach (var eventConfig in eventsConfig)
+            {
+                CreateOrUpdateSingleEvent(eventConfig);
+            }
+
+            _roomScheduledEventGroup.UserGroupCallBack += HandleScheduledEvent;
+        }
+
+        private void GetOrCreateScheduleGroup()
+        {
+            if (_roomScheduledEventGroup == null)
+            {
+                _roomScheduledEventGroup = Scheduler.GetEventGroup(Key) ?? new ScheduledEventGroup(Key);
+
+                Scheduler.AddEventGroup(_roomScheduledEventGroup);
+            }
+
+            _roomScheduledEventGroup.RetrieveAllEvents();
+        }
+
+        private void CreateOrUpdateSingleEvent(ScheduledEventConfig scheduledEvent)
+        {
+            if (!_roomScheduledEventGroup.ScheduledEvents.ContainsKey(scheduledEvent.Key))
+            {
+                SchedulerUtilities.CreateEventFromConfig(scheduledEvent, _roomScheduledEventGroup, HandleScheduledEvent);
+                return;
+            }
+
+            var roomEvent = _roomScheduledEventGroup.ScheduledEvents[scheduledEvent.Key];
+
+            if (!SchedulerUtilities.CheckEventTimeForMatch(roomEvent, DateTime.Parse(scheduledEvent.Time)) &&
+                !SchedulerUtilities.CheckEventRecurrenceForMatch(roomEvent, scheduledEvent.Days))
+            {
+                return;
+            }
+
+            Debug.Console(1, this,
+                "Existing event does not match new config properties. Deleting existing event '{0}' and creating new event from configuration",
+                roomEvent.Name);
+
+            _roomScheduledEventGroup.DeleteEvent(roomEvent);
+
+            SchedulerUtilities.CreateEventFromConfig(scheduledEvent, _roomScheduledEventGroup, HandleScheduledEvent);
+        }
+
+        public void AddOrUpdateScheduledEvent(ScheduledEventConfig scheduledEvent)
+        {
+            //update config based on key of scheduleEvent
+            GetOrCreateScheduleGroup();
+            var existingEventIndex = _config.ScheduledEvents.FindIndex((e) => e.Key == scheduledEvent.Key);
+
+            if (existingEventIndex < 0)
+            {
+                _config.ScheduledEvents.Add(scheduledEvent);
+            }
+            else
+            {
+                _config.ScheduledEvents[existingEventIndex] = scheduledEvent;
+            }
+
+            //create or update event based on config
+            CreateOrUpdateSingleEvent(scheduledEvent);
+            //save config
+            Config.Properties = JToken.FromObject(_config);
+
+            CustomSetConfig(Config);
+            //Fire Event
+            OnScheduledEventUpdate();
+        }
+
+        public List<ScheduledEventConfig> GetScheduledEvents()
+        {
+            return _config.ScheduledEvents ?? new List<ScheduledEventConfig>();
+        }
+
+        private void OnScheduledEventUpdate()
+        {
+            var handler = ScheduledEventsChanged;
+
+            if (handler == null)
+            {
+                return;
+            }
+
+            handler(this, new ScheduledEventEventArgs {ScheduledEvents = _config.ScheduledEvents});
+        }
+
+        public event EventHandler<ScheduledEventEventArgs> ScheduledEventsChanged;
+
+        private void HandleScheduledEvent(ScheduledEvent schevent, ScheduledEventCommon.eCallbackReason type)
+        {
+            var eventConfig = _config.ScheduledEvents.FirstOrDefault(e => e.Key == schevent.Name);
+
+            if (eventConfig == null)
+            {
+                Debug.Console(1, this, "Event with name {0} not found", schevent.Name);
+                return;
+            }
+
+            Debug.Console(1, this, "Running actions for event {0}", schevent.Name);
+
+            if (eventConfig.Acknowledgeable)
+            {
+                schevent.Acknowledge();
+            }
+
+            CrestronInvoke.BeginInvoke((o) =>
+            {
+                Debug.Console(2, this, "There are {0} actions to execute for this event.", eventConfig.Actions.Count);
+
+                foreach (var a in eventConfig.Actions)
+                {
+                    Debug.Console(2, this, 
+@"Attempting to run action:
+DeviceKey: {0}
+MethodName: {1}
+Params: {2}"
+                    , a.DeviceKey, a.MethodName, a.Params);
+                    DeviceJsonApi.DoDeviceAction(a);
+                }
+            });
+        }
+
+
+        public void RoomPowerOn()
+        {
+            Debug.Console(2, this, "Room Powering On");
+
+            var dummySource = DeviceManager.GetDeviceForKey(_config.DummySourceKey) as IRoutingOutputs;
+
+            if (dummySource == null)
+            {
+                Debug.Console(1, this, "Unable to get source with key: {0}", _config.DummySourceKey);
+                return;
+            }
+
+            foreach (var display in _displays)
+            {
+                RunDirectRoute(dummySource, display.Value);
+            }
+        }
+
+        public void RoomPowerOff()
+        {
+            Debug.Console(2, this, "Room Powering Off");
+
+            foreach (var display in _displays)
+            {
+                display.Value.PowerOff();
+            }
+        }
+
+        private Dictionary<string, T> GetDevices<T>(ICollection<string> config) where T : IKeyed
+        {
+            try
+            {
+                var returnValue = DeviceManager.AllDevices.OfType<T>()
+                    .Where(d => config.Contains(d.Key))
+                    .ToDictionary(d => d.Key, d => d);
+
+                return returnValue;
+            }
+            catch
+            {
+                Debug.Console(0, this, Debug.ErrorLogLevel.Error,
+                    "Error getting devices. Check Essentials Configuration");
+                return null;
+            }
+        }
+
+        #region Overrides of EssentialsRoomBase
+
+        protected override Func<bool> OnFeedbackFunc
+        {
+            get { return () => RoomPowerIsOn; }
+        }
+
+        protected override void EndShutdown()
+        {
+        }
+
+        public override void SetDefaultLevels()
+        {
+        }
+
+        public override void PowerOnToDefaultOrLastSource()
+        {
+        }
+
+        public override bool RunDefaultPresentRoute()
+        {
+            return false;
+        }
+
+        public override void RoomVacatedForTimeoutPeriod(object o)
+        {
+        }
+
+        #endregion
+
+        #region Implementation of IBridgeAdvanced
+
+        public void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
+        {
+
+            var joinMap = new EssentialsTechRoomJoinMap(joinStart);
+            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
+
+            if (!String.IsNullOrEmpty(joinMapSerialized))
+            {
+                joinMap = JsonConvert.DeserializeObject<EssentialsTechRoomJoinMap>(joinMapSerialized);
+            }
+
+            if (bridge != null)
+            {
+                bridge.AddJoinMap(Key, joinMap);
+            }
+            uint i;
+            if (_config.IsPrimary)
+            {
+                i = 0;
+                foreach (var feedback in CurrentPresetsFeedbacks)
+                {
+                    feedback.Value.LinkInputSig(trilist.StringInput[(uint) (joinMap.CurrentPreset.JoinNumber + i)]);
+                    i++;
+                }
+
+                trilist.OnlineStatusChange += (device, args) =>
+                {
+                    if (!args.DeviceOnLine)
+                    {
+                        return;
+                    }
+
+                    foreach (var feedback in CurrentPresetsFeedbacks)
+                    {
+                        feedback.Value.FireUpdate();
+                    }
+                };
+
+                return;
+            }
+
+            i = 0;
+            foreach (var setTopBox in _tuners)
+            {
+                var tuner = setTopBox;
+
+                trilist.SetStringSigAction(joinMap.CurrentPreset.JoinNumber + i, s => _tunerPresets.Dial(s, tuner.Value));
+
+                i++;
+            }
+        }
+
+        #endregion
+
+        private class EssentialsTechRoomJoinMap : JoinMapBaseAdvanced
+        {
+            [JoinName("currentPreset")]
+            public JoinDataComplete CurrentPreset = new JoinDataComplete(new JoinData {JoinNumber = 1, JoinSpan = 16},
+                new JoinMetadata {Description = "Current Tuner Preset", JoinType = eJoinType.Serial});
+
+            public EssentialsTechRoomJoinMap(uint joinStart) : base(joinStart, typeof(EssentialsTechRoomJoinMap))
+            {
+            }
+        }
+
+        #region IRunDirectRouteAction Members
+
+        private void RunDirectRoute(IRoutingOutputs source, IRoutingSink dest)
+        {
+             if (dest == null)
+            {
+                Debug.Console(1, this, "Cannot route, unknown destination '{0}'", dest.Key);
+                return;
+            }
+
+            if (source == null)
+            {
+                dest.ReleaseRoute();
+                if (dest is IHasPowerControl)
+                    (dest as IHasPowerControl).PowerOff();
+            }
+            else
+            {
+                dest.ReleaseAndMakeRoute(source, eRoutingSignalType.Video);
+            }
+        }
+
+        /// <summary>
+        /// Attempts to route directly between a source and destination
+        /// </summary>
+        /// <param name="sourceKey"></param>
+        /// <param name="destinationKey"></param>
+        public void RunDirectRoute(string sourceKey, string destinationKey)
+        {
+            IRoutingSink dest = null;
+
+            dest = DeviceManager.GetDeviceForKey(destinationKey) as IRoutingSink;
+
+            var source = DeviceManager.GetDeviceForKey(sourceKey) as IRoutingOutputs;
+
+            if (source == null || dest == null)
+            {
+                Debug.Console(1, this, "Cannot route unknown source or destination '{0}' to {1}", sourceKey, destinationKey);
+                return;
+            }
+            RunDirectRoute(source, dest);
+        }
+
+        #endregion
+    }
+
+    public class ScheduledEventEventArgs : EventArgs
+    {
+        public List<ScheduledEventConfig> ScheduledEvents;
+    }
+}

essentials-framework/Essentials Core/PepperDashEssentialsBase/Bridges/BridgeBase.cs

@@ -78,7 +78,7 @@ namespace PepperDash.Essentials.Core.Bridges
     /// <summary>
     /// Bridge API using EISC
     /// </summary>
-    public class EiscApiAdvanced : BridgeApi
+    public class EiscApiAdvanced : BridgeApi, ICommunicationMonitor
     {
         public EiscApiPropertiesConfig PropertiesConfig { get; private set; }
 
@@ -98,13 +98,35 @@ namespace PepperDash.Essentials.Core.Bridges
 
             Eisc.SigChange += Eisc_SigChange;
 
+            CommunicationMonitor = new CrestronGenericBaseCommunicationMonitor(this, Eisc, 120000, 300000);
+
             AddPostActivationAction(LinkDevices);
+            AddPostActivationAction(LinkRooms);
+            AddPostActivationAction(RegisterEisc);
+        }
+
+        public override bool CustomActivate()
+        {
+            CommunicationMonitor.Start();
+            return base.CustomActivate();
+        }
+
+        public override bool Deactivate()
+        {
+            CommunicationMonitor.Stop();
+            return base.Deactivate();
         }
 
         private void LinkDevices()
         {
             Debug.Console(1, this, "Linking Devices...");
 
+            if (PropertiesConfig.Devices == null)
+            {
+                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "No devices linked to this bridge");
+                return;
+            }
+
             foreach (var d in PropertiesConfig.Devices)
             {
                 var device = DeviceManager.GetDeviceForKey(d.DeviceKey);
@@ -130,6 +152,14 @@ namespace PepperDash.Essentials.Core.Bridges
                     bridge.LinkToApi(Eisc, d.JoinStart, d.JoinMapKey, this);
                 }
             }
+        }
+
+        private void RegisterEisc()
+        {
+            if (Eisc.Registered)
+            {
+                return;
+            }
 
             var registerResult = Eisc.Register();
 
@@ -142,6 +172,31 @@ namespace PepperDash.Essentials.Core.Bridges
             Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "EISC registration successful");
         }
 
+        public void LinkRooms()
+        {
+            Debug.Console(1, this, "Linking Rooms...");
+
+            if (PropertiesConfig.Rooms == null)
+            {
+                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "No rooms linked to this bridge.");
+                return;
+            }
+
+            foreach (var room in PropertiesConfig.Rooms)
+            {
+                var rm = DeviceManager.GetDeviceForKey(room.RoomKey) as IBridgeAdvanced;
+
+                if (rm == null)
+                {
+                    Debug.Console(1, this, Debug.ErrorLogLevel.Notice,
+                        "Room {0} does not implement IBridgeAdvanced. Skipping...", room.RoomKey);
+                    continue;
+                }
+
+                rm.LinkToApi(Eisc, room.JoinStart, room.JoinMapKey, this);
+            }
+        }
+
         /// <summary>
         /// Adds a join map
         /// </summary>
@@ -280,6 +335,12 @@ namespace PepperDash.Essentials.Core.Bridges
                 Debug.Console(2, this, "Error in Eisc_SigChange handler: {0}", e);
             }
         }
+
+        #region Implementation of ICommunicationMonitor
+
+        public StatusMonitorBase CommunicationMonitor { get; private set; }
+
+        #endregion
     }
 
     public class EiscApiPropertiesConfig
@@ -290,6 +351,9 @@ namespace PepperDash.Essentials.Core.Bridges
         [JsonProperty("devices")]
         public List<ApiDevicePropertiesConfig> Devices { get; set; }
 
+        [JsonProperty("rooms")]
+        public List<ApiRoomPropertiesConfig> Rooms { get; set; } 
+
 
         public class ApiDevicePropertiesConfig
         {
@@ -303,6 +367,18 @@ namespace PepperDash.Essentials.Core.Bridges
             public string JoinMapKey { get; set; }
         }
 
+        public class ApiRoomPropertiesConfig
+        {
+            [JsonProperty("roomKey")]
+            public string RoomKey { get; set; }
+
+            [JsonProperty("joinStart")]
+            public uint JoinStart { get; set; }
+
+            [JsonProperty("joinMapKey")]
+            public string JoinMapKey { get; set; }
+        }
+
     }
 
     public class EiscApiAdvancedFactory : EssentialsDeviceFactory<EiscApiAdvanced>

essentials-framework/Essentials Core/PepperDashEssentialsBase/Bridges/JoinMaps/AppleTvJoinMap.cs

@@ -47,7 +47,7 @@ namespace PepperDash.Essentials.Core.Bridges
         /// <param name="joinStart">Join this join map will start at</param>
         /// <param name="type">Type of the child join map</param>
         public AppleTvJoinMap(uint joinStart, Type type) : base(joinStart, type)
-    {
-    }
+        {
+        }
     }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Bridges/JoinMaps/DmChassisControllerJoinMap.cs

@@ -76,6 +76,14 @@ namespace PepperDash.Essentials.Core.Bridges
         public JoinDataComplete HdcpSupportCapability = new JoinDataComplete(new JoinData { JoinNumber = 1201, JoinSpan = 32 },
             new JoinMetadata { Description = "DM Chassis Input HDCP Support Capability", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
 
+        [JoinName("InputStreamCardState")]
+        public JoinDataComplete InputStreamCardState = new JoinDataComplete(new JoinData { JoinNumber = 1501, JoinSpan = 32 },
+            new JoinMetadata { Description = "DM Chassis Stream Input Start (1), Stop (2), Pause (3) with Feedback", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
+
+        [JoinName("OutputStreamCardState")]
+        public JoinDataComplete OutputStreamCardState = new JoinDataComplete(new JoinData { JoinNumber = 1601, JoinSpan = 32 },
+            new JoinMetadata { Description = "DM Chassis Stream Output Start (1), Stop (2), Pause (3) with Feedback", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
+
         [JoinName("InputNames")]
         public JoinDataComplete InputNames = new JoinDataComplete(new JoinData { JoinNumber = 101, JoinSpan = 32 },
             new JoinMetadata { Description = "DM Chassis Input Name", JoinCapabilities = eJoinCapabilities.ToSIMPL, JoinType = eJoinType.Serial });

essentials-framework/Essentials Core/PepperDashEssentialsBase/Comm and IR/ComPortController.cs

@@ -56,6 +56,11 @@ namespace PepperDash.Essentials.Core
 
 	    private void RegisterAndConfigureComPort()
 	    {
+	        if (Port == null)
+	        {
+	            Debug.Console(0,this,Debug.ErrorLogLevel.Error, "Configured com Port for this device does not exist.");
+	            return;
+	        }
             if (Port.Parent is CrestronControlSystem)
             {
                 var result = Port.Register();

essentials-framework/Essentials Core/PepperDashEssentialsBase/Comm and IR/CommFactory.cs

@@ -104,7 +104,7 @@ namespace PepperDash.Essentials.Core
 			var dev = GetIComPortsDeviceFromManagedDevice(config.ControlPortDevKey);
 			if (dev != null && config.ControlPortNumber <= dev.NumberOfComPorts)
 				return dev.ComPorts[config.ControlPortNumber];
-			Debug.Console(0, "GetComPort: Device '{0}' does not have com port {1}", config.ControlPortDevKey, config.ControlPortNumber);
+			Debug.Console(0,Debug.ErrorLogLevel.Notice, "GetComPort: Device '{0}' does not have com port {1}", config.ControlPortDevKey, config.ControlPortNumber);
 			return null;
 		}
 

essentials-framework/Essentials Core/PepperDashEssentialsBase/Config/BasicConfig.cs

@@ -7,6 +7,8 @@ using Newtonsoft.Json;
 using PepperDash.Core;
 using PepperDash.Essentials.Core;
 
+using Newtonsoft.Json.Linq;
+
 namespace PepperDash.Essentials.Core.Config
 {
 	/// <summary>
@@ -27,7 +29,7 @@ namespace PepperDash.Essentials.Core.Config
 		public List<TieLineConfig> TieLines { get; set; }
 
         [JsonProperty("joinMaps")]
-        public Dictionary<string, string> JoinMaps { get; set; }
+        public Dictionary<string, JObject> JoinMaps { get; set; }
 
 		/// <summary>
 		/// Checks SourceLists for a given list and returns it if found. Otherwise, returns null

essentials-framework/Essentials Core/PepperDashEssentialsBase/Config/Essentials/ConfigReader.cs

@@ -1,195 +1,195 @@
-using System;
+using System;
 using System.Linq;
 using System.Text;
-using Crestron.SimplSharp;
-using Crestron.SimplSharp.CrestronIO;
-using Newtonsoft.Json;
-using Newtonsoft.Json.Linq;
-using PepperDash.Core;
-using PepperDash.Core.Config;
-
-namespace PepperDash.Essentials.Core.Config
-{
-	/// <summary>
-	/// Loads the ConfigObject from the file
-	/// </summary>
+using Crestron.SimplSharp;
+using Crestron.SimplSharp.CrestronIO;
+using Newtonsoft.Json;
+using Newtonsoft.Json.Linq;
+using PepperDash.Core;
+using PepperDash.Core.Config;
+
+namespace PepperDash.Essentials.Core.Config
+{
+	/// <summary>
+	/// Loads the ConfigObject from the file
+	/// </summary>
 	public class ConfigReader
 	{
 	    public const string LocalConfigPresent =
             @"
 ***************************************************
 ************* Using Local config file *************
-***************************************************";
-
-		public static EssentialsConfig ConfigObject { get; private set; }
-
-		public static bool LoadConfig2()
-		{
-			Debug.Console(0, Debug.ErrorLogLevel.Notice, "Loading unmerged system/template portal configuration file.");
-			try
-			{
-                // Check for local config file first
-                var filePath = Global.FilePathPrefix + ConfigWriter.LocalConfigFolder + Global.DirectorySeparator + Global.ConfigFileName;
-
-                bool localConfigFound = false;
-
-                Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to load Local config file: '{0}'", filePath);
-
-                // Check for local config directory first
-
-                var configFiles = GetConfigFiles(filePath);
-
-                if (configFiles != null)
-                {
-                    if (configFiles.Length > 1)
-                    {
-                        Debug.Console(0, Debug.ErrorLogLevel.Error,
-                            "****Error: Multiple Local Configuration files present. Please ensure only a single file exists and reset program.****");
-                        return false;
-                    }
-                    if(configFiles.Length == 1)
-                    {
+***************************************************";
+
+		public static EssentialsConfig ConfigObject { get; private set; }
+
+		public static bool LoadConfig2()
+		{
+			Debug.Console(0, Debug.ErrorLogLevel.Notice, "Loading unmerged system/template portal configuration file.");
+			try
+			{
+                // Check for local config file first
+                var filePath = Global.FilePathPrefix + ConfigWriter.LocalConfigFolder + Global.DirectorySeparator + Global.ConfigFileName;
+
+                bool localConfigFound = false;
+
+                Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to load Local config file: '{0}'", filePath);
+
+                // Check for local config directory first
+
+                var configFiles = GetConfigFiles(filePath);
+
+                if (configFiles != null)
+                {
+                    if (configFiles.Length > 1)
+                    {
+                        Debug.Console(0, Debug.ErrorLogLevel.Error,
+                            "****Error: Multiple Local Configuration files present. Please ensure only a single file exists and reset program.****");
+                        return false;
+                    }
+                    if(configFiles.Length == 1)
+                    {
                         localConfigFound = true;
-                        
-                    }
-                }
-                else
-                {
-                    Debug.Console(0, Debug.ErrorLogLevel.Notice,
-                        "Local Configuration file not present.", filePath);
-
-                }
-
-                // Check for Portal Config
-                if(!localConfigFound)
-                {
-                    filePath = Global.FilePathPrefix + Global.ConfigFileName;
-
-                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to load Portal config file: '{0}'", filePath);
-
-                    configFiles = GetConfigFiles(filePath);
-
-                    if (configFiles != null)
-                    {
-                        Debug.Console(2, "{0} config files found matching pattern", configFiles.Length);
-
-                        if (configFiles.Length > 1)
-                        {
-                            Debug.Console(0, Debug.ErrorLogLevel.Error,
-                                "****Error: Multiple Portal Configuration files present. Please ensure only a single file exists and reset program.****");
-                            return false;
-                        }
-                        else if (configFiles.Length == 1)
-                        {
-                            Debug.Console(0, Debug.ErrorLogLevel.Notice, "Found Portal config file: '{0}'", filePath);
-                        }
-                        else
-                        {
-                            Debug.Console(0, Debug.ErrorLogLevel.Notice, "No config file found.");
-                            return false;
-                        }
-                    }
-                    else
-                    {
-                        Debug.Console(0, Debug.ErrorLogLevel.Error,
-                            "ERROR: Portal Configuration file not present. Please load file and reset program.");
-                        return false;
-                    }
-                }
-
-                // Get the actual file path
+                        
+                    }
+                }
+                else
+                {
+                    Debug.Console(0, Debug.ErrorLogLevel.Notice,
+                        "Local Configuration file not present.", filePath);
+
+                }
+
+                // Check for Portal Config
+                if(!localConfigFound)
+                {
+                    filePath = Global.FilePathPrefix + Global.ConfigFileName;
+
+                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to load Portal config file: '{0}'", filePath);
+
+                    configFiles = GetConfigFiles(filePath);
+
+                    if (configFiles != null)
+                    {
+                        Debug.Console(2, "{0} config files found matching pattern", configFiles.Length);
+
+                        if (configFiles.Length > 1)
+                        {
+                            Debug.Console(0, Debug.ErrorLogLevel.Error,
+                                "****Error: Multiple Portal Configuration files present. Please ensure only a single file exists and reset program.****");
+                            return false;
+                        }
+                        else if (configFiles.Length == 1)
+                        {
+                            Debug.Console(0, Debug.ErrorLogLevel.Notice, "Found Portal config file: '{0}'", filePath);
+                        }
+                        else
+                        {
+                            Debug.Console(0, Debug.ErrorLogLevel.Notice, "No config file found.");
+                            return false;
+                        }
+                    }
+                    else
+                    {
+                        Debug.Console(0, Debug.ErrorLogLevel.Error,
+                            "ERROR: Portal Configuration file not present. Please load file and reset program.");
+                        return false;
+                    }
+                }
+
+                // Get the actual file path
                 filePath = configFiles[0].FullName;
 
                 // Generate debug statement if using a local file.
 			    if (localConfigFound)
 			    {
                     GetLocalFileMessage(filePath);
-			    }
-
-                // Read the file
-                using (StreamReader fs = new StreamReader(filePath))
-                {
-                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Loading config file: '{0}'", filePath);
-
-                    if (localConfigFound)
-                    {
-                        ConfigObject = JObject.Parse(fs.ReadToEnd()).ToObject<EssentialsConfig>();
-
-                        Debug.Console(0, Debug.ErrorLogLevel.Notice, "Successfully Loaded Local Config");
-
-                        return true;
-                    }
-                    else
-                    {
-                        var doubleObj = JObject.Parse(fs.ReadToEnd());
-                        ConfigObject = PortalConfigReader.MergeConfigs(doubleObj).ToObject<EssentialsConfig>();
-
-                        // Extract SystemUrl and TemplateUrl into final config output
-
-                        if (doubleObj["system_url"] != null)
-                        {
-                            ConfigObject.SystemUrl = doubleObj["system_url"].Value<string>();
-                        }
-
-                        if (doubleObj["template_url"] != null)
-                        {
-                            ConfigObject.TemplateUrl = doubleObj["template_url"].Value<string>();
-                        }
-                    }
-
-                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Successfully Loaded Merged Config");
-
-                    return true;
-                }
-			}
-			catch (Exception e)
-			{
-                Debug.Console(0, Debug.ErrorLogLevel.Error, "ERROR: Config load failed: \r{0}", e);
-				return false;
-			}
-		}
-
-        /// <summary>
-        /// Returns all the files from the directory specified.
-        /// </summary>
-        /// <param name="filePath"></param>
-        /// <returns></returns>
-        public static FileInfo[] GetConfigFiles(string filePath)
-        {
-            // Get the directory
-            var dir = Path.GetDirectoryName(filePath);
-
-            if (Directory.Exists(dir))
-            {
-                Debug.Console(1, "Searching in Directory '{0}'", dir);
-                // Get the directory info
-                var dirInfo = new DirectoryInfo(dir);
-
-                // Get the file name
-                var fileName = Path.GetFileName(filePath);
-                Debug.Console(1, "For Config Files matching: '{0}'", fileName);
-
-                // Get the files that match from the directory
-                return dirInfo.GetFiles(fileName);
-            }
-            else
-            {
-                Debug.Console(0, Debug.ErrorLogLevel.Notice,
-                    "Directory not found: ", dir);
-
-                return null;
-            }
-        }
-
-		/// <summary>
-		/// Returns the group for a given device key in config
-		/// </summary>
-		/// <param name="key"></param>
-		/// <returns></returns>
-        public static string GetGroupForDeviceKey(string key)
-        {
-            var dev = ConfigObject.Devices.FirstOrDefault(d => d.Key.Equals(key, StringComparison.OrdinalIgnoreCase));
-            return dev == null ? null : dev.Group;
+			    }
+
+                // Read the file
+                using (StreamReader fs = new StreamReader(filePath))
+                {
+                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Loading config file: '{0}'", filePath);
+
+                    if (localConfigFound)
+                    {
+                        ConfigObject = JObject.Parse(fs.ReadToEnd()).ToObject<EssentialsConfig>();
+
+                        Debug.Console(0, Debug.ErrorLogLevel.Notice, "Successfully Loaded Local Config");
+
+                        return true;
+                    }
+                    else
+                    {
+                        var doubleObj = JObject.Parse(fs.ReadToEnd());
+                        ConfigObject = PortalConfigReader.MergeConfigs(doubleObj).ToObject<EssentialsConfig>();
+
+                        // Extract SystemUrl and TemplateUrl into final config output
+
+                        if (doubleObj["system_url"] != null)
+                        {
+                            ConfigObject.SystemUrl = doubleObj["system_url"].Value<string>();
+                        }
+
+                        if (doubleObj["template_url"] != null)
+                        {
+                            ConfigObject.TemplateUrl = doubleObj["template_url"].Value<string>();
+                        }
+                    }
+
+                    Debug.Console(0, Debug.ErrorLogLevel.Notice, "Successfully Loaded Merged Config");
+
+                    return true;
+                }
+			}
+			catch (Exception e)
+			{
+                Debug.Console(0, Debug.ErrorLogLevel.Error, "ERROR: Config load failed: \r{0}", e);
+				return false;
+			}
+		}
+
+        /// <summary>
+        /// Returns all the files from the directory specified.
+        /// </summary>
+        /// <param name="filePath"></param>
+        /// <returns></returns>
+        public static FileInfo[] GetConfigFiles(string filePath)
+        {
+            // Get the directory
+            var dir = Path.GetDirectoryName(filePath);
+
+            if (Directory.Exists(dir))
+            {
+                Debug.Console(1, "Searching in Directory '{0}'", dir);
+                // Get the directory info
+                var dirInfo = new DirectoryInfo(dir);
+
+                // Get the file name
+                var fileName = Path.GetFileName(filePath);
+                Debug.Console(1, "For Config Files matching: '{0}'", fileName);
+
+                // Get the files that match from the directory
+                return dirInfo.GetFiles(fileName);
+            }
+            else
+            {
+                Debug.Console(0, Debug.ErrorLogLevel.Notice,
+                    "Directory not found: ", dir);
+
+                return null;
+            }
+        }
+
+		/// <summary>
+		/// Returns the group for a given device key in config
+		/// </summary>
+		/// <param name="key"></param>
+		/// <returns></returns>
+        public static string GetGroupForDeviceKey(string key)
+        {
+            var dev = ConfigObject.Devices.FirstOrDefault(d => d.Key.Equals(key, StringComparison.OrdinalIgnoreCase));
+            return dev == null ? null : dev.Group;
         }
 
 	    private static void GetLocalFileMessage(string filePath)
@@ -248,7 +248,7 @@ namespace PepperDash.Essentials.Core.Config
 
             Debug.Console(2, Debug.ErrorLogLevel.Notice, "Found Local config file: '{0}'", filePath);
             Debug.Console(0, newDebugString.ToString());
-	    }
-
-	}
+	    }
+
+	}
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Crestron IO/Inputs/GenericDigitalInputDevice.cs

@@ -1,38 +1,39 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using Crestron.SimplSharp;
-using Crestron.SimplSharpPro;
-using Crestron.SimplSharpPro.DeviceSupport;
-using Newtonsoft.Json;
-using PepperDash.Core;
-using PepperDash.Essentials.Core.Bridges;
-using PepperDash.Essentials.Core.Config;
-
-
-namespace PepperDash.Essentials.Core.CrestronIO
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+using Crestron.SimplSharpPro;
+using Crestron.SimplSharpPro.DeviceSupport;
+using Newtonsoft.Json;
+using PepperDash.Core;
+using PepperDash.Essentials.Core.Bridges;
+using PepperDash.Essentials.Core.Config;
+
+
+namespace PepperDash.Essentials.Core.CrestronIO
 {
     [Description("Wrapper class for Digital Input")]
-    public class GenericDigitalInputDevice : EssentialsBridgeableDevice, IDigitalInput
-    {
-        public DigitalInput InputPort { get; private set; }
-
-        public BoolFeedback InputStateFeedback { get; private set; }
-
-        Func<bool> InputStateFeedbackFunc
-        {
-            get
-            {
-                return () => InputPort.State;
-            }
-        }
+    public class GenericDigitalInputDevice : EssentialsBridgeableDevice, IDigitalInput
+    {
+        public DigitalInput InputPort { get; private set; }
+
+        public BoolFeedback InputStateFeedback { get; private set; }
+
+        Func<bool> InputStateFeedbackFunc
+        {
+            get
+            {
+                return () => InputPort.State;
+            }
+        }
 
 
         public GenericDigitalInputDevice(string key, string name, Func<IOPortConfig, DigitalInput> postActivationFunc,
             IOPortConfig config)
             : base(key, name)
         {
+            InputStateFeedback = new BoolFeedback(InputStateFeedbackFunc);
 
             AddPostActivationAction(() =>
             {
@@ -40,15 +41,15 @@ namespace PepperDash.Essentials.Core.CrestronIO
 
                 InputPort.Register();
 
-                InputPort.StateChange += InputPort_StateChange;
+                InputPort.StateChange += InputPort_StateChange;
 
             });
         }
 
         #region Events
 
-        void InputPort_StateChange(DigitalInput digitalInput, DigitalInputEventArgs args)
-        {
+        void InputPort_StateChange(DigitalInput digitalInput, DigitalInputEventArgs args)
+        {
             InputStateFeedback.FireUpdate();
         }
 
@@ -81,7 +82,7 @@ namespace PepperDash.Essentials.Core.CrestronIO
             }
             if (ioPortDevice == null)
             {
-                Debug.Console(0, "GetDigitalInput: Device '0' is not a valid IRelayPorts Device", dc.PortDeviceKey);
+                Debug.Console(0, "GetDigitalInput: Device '0' is not a valid IDigitalInputPorts Device", dc.PortDeviceKey);
                 return null;
             }
 
@@ -99,13 +100,13 @@ namespace PepperDash.Essentials.Core.CrestronIO
 
         #region Bridge Linking
 
-        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
+        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
         {
-            var joinMap = new IDigitalInputJoinMap(joinStart);
-
-            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
-
-            if (!string.IsNullOrEmpty(joinMapSerialized))
+            var joinMap = new IDigitalInputJoinMap(joinStart);
+
+            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
+
+            if (!string.IsNullOrEmpty(joinMapSerialized))
                 joinMap = JsonConvert.DeserializeObject<IDigitalInputJoinMap>(joinMapSerialized);
 
             if (bridge != null)
@@ -115,19 +116,19 @@ namespace PepperDash.Essentials.Core.CrestronIO
             else
             {
                 Debug.Console(0, this, "Please update config to use 'eiscapiadvanced' to get all join map features for this device.");
-            }
-
-            try
-            {
-                Debug.Console(1, this, "Linking to Trilist '{0}'", trilist.ID.ToString("X"));
-
-                // Link feedback for input state
-                InputStateFeedback.LinkInputSig(trilist.BooleanInput[joinMap.InputState.JoinNumber]);
-            }
-            catch (Exception e)
-            {
-                Debug.Console(1, this, "Unable to link device '{0}'.  Input is null", Key);
-                Debug.Console(1, this, "Error: {0}", e);
+            }
+
+            try
+            {
+                Debug.Console(1, this, "Linking to Trilist '{0}'", trilist.ID.ToString("X"));
+
+                // Link feedback for input state
+                InputStateFeedback.LinkInputSig(trilist.BooleanInput[joinMap.InputState.JoinNumber]);
+            }
+            catch (Exception e)
+            {
+                Debug.Console(1, this, "Unable to link device '{0}'.  Input is null", Key);
+                Debug.Console(1, this, "Error: {0}", e);
             }
         }
 
@@ -144,7 +145,7 @@ namespace PepperDash.Essentials.Core.CrestronIO
 
             public override EssentialsDevice BuildDevice(DeviceConfig dc)
             {
-                Debug.Console(1, "Factory Attempting to create new Generic Relay Device");
+                Debug.Console(1, "Factory Attempting to create new Generic Digital Input Device");
 
                 var props = JsonConvert.DeserializeObject<IOPortConfig>(dc.Properties.ToString());
 
@@ -158,7 +159,7 @@ namespace PepperDash.Essentials.Core.CrestronIO
 
         #endregion
 
-    }
-
-
+    }
+
+
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Crestron IO/Inputs/GenericVersiportInputDevice.cs

@@ -4,15 +4,21 @@ using System.Linq;
 using System.Text;
 using Crestron.SimplSharp;
 using Crestron.SimplSharpPro;
+using Crestron.SimplSharpPro.DeviceSupport;
 
 using PepperDash.Core;
+using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Bridges;
+
+
+using Newtonsoft.Json;
 
 namespace PepperDash.Essentials.Core.CrestronIO
 {
     /// <summary>
     /// Represents a generic digital input deviced tied to a versiport
     /// </summary>
-    public class GenericVersiportDigitalInputDevice : EssentialsDevice, IDigitalInput
+    public class GenericVersiportDigitalInputDevice : EssentialsBridgeableDevice, IDigitalInput
     {
         public Versiport InputPort { get; private set; }
 
@@ -26,17 +32,29 @@ namespace PepperDash.Essentials.Core.CrestronIO
             }
         }
 
-        public GenericVersiportDigitalInputDevice(string key, Versiport inputPort, IOPortConfig props):
-            base(key)
+        public GenericVersiportDigitalInputDevice(string key, string name, Func<IOPortConfig, Versiport> postActivationFunc, IOPortConfig config) :
+            base(key, name)
         {
             InputStateFeedback = new BoolFeedback(InputStateFeedbackFunc);
-            InputPort = inputPort;
-            InputPort.SetVersiportConfiguration(eVersiportConfiguration.DigitalInput);
-            if (props.DisablePullUpResistor)
-                InputPort.DisablePullUpResistor = true;
-            InputPort.VersiportChange += new VersiportEventHandler(InputPort_VersiportChange);
 
-            Debug.Console(1, this, "Created GenericVersiportDigitalInputDevice on port '{0}'.  DisablePullUpResistor: '{1}'", props.PortNumber, InputPort.DisablePullUpResistor);
+            AddPostActivationAction(() =>
+            {
+                InputPort = postActivationFunc(config);
+
+                InputPort.Register();
+
+                InputPort.SetVersiportConfiguration(eVersiportConfiguration.DigitalInput);
+                if (config.DisablePullUpResistor)
+                    InputPort.DisablePullUpResistor = true;
+
+                InputPort.VersiportChange += InputPort_VersiportChange;
+
+
+
+                Debug.Console(1, this, "Created GenericVersiportDigitalInputDevice on port '{0}'.  DisablePullUpResistor: '{1}'", config.PortNumber, InputPort.DisablePullUpResistor);
+
+            });
+
         }
 
         void InputPort_VersiportChange(Versiport port, VersiportEventArgs args)
@@ -46,5 +64,105 @@ namespace PepperDash.Essentials.Core.CrestronIO
             if(args.Event == eVersiportEvent.DigitalInChange)
                 InputStateFeedback.FireUpdate();
         }
+
+
+        #region Bridge Linking
+
+        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
+        {
+            var joinMap = new IDigitalInputJoinMap(joinStart);
+
+            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
+
+            if (!string.IsNullOrEmpty(joinMapSerialized))
+                joinMap = JsonConvert.DeserializeObject<IDigitalInputJoinMap>(joinMapSerialized);
+
+            if (bridge != null)
+            {
+                bridge.AddJoinMap(Key, joinMap);
+            }
+            else
+            {
+                Debug.Console(0, this, "Please update config to use 'eiscapiadvanced' to get all join map features for this device.");
+            }
+
+            try
+            {
+                Debug.Console(1, this, "Linking to Trilist '{0}'", trilist.ID.ToString("X"));
+
+                // Link feedback for input state
+                InputStateFeedback.LinkInputSig(trilist.BooleanInput[joinMap.InputState.JoinNumber]);
+            }
+            catch (Exception e)
+            {
+                Debug.Console(1, this, "Unable to link device '{0}'.  Input is null", Key);
+                Debug.Console(1, this, "Error: {0}", e);
+            }
+        }
+
+        #endregion
+
+
+        public static Versiport GetVersiportDigitalInput(IOPortConfig dc)
+        {
+         
+            IIOPorts ioPortDevice;
+
+            if (dc.PortDeviceKey.Equals("processor"))
+            {
+                if (!Global.ControlSystem.SupportsVersiport)
+                {
+                    Debug.Console(0, "GetVersiportDigitalInput: Processor does not support Versiports");
+                    return null;
+                }
+                ioPortDevice = Global.ControlSystem;
+            }
+            else
+            {
+                var ioPortDev = DeviceManager.GetDeviceForKey(dc.PortDeviceKey) as IIOPorts;
+                if (ioPortDev == null)
+                {
+                    Debug.Console(0, "GetVersiportDigitalInput: Device {0} is not a valid device", dc.PortDeviceKey);
+                    return null;
+                }
+                ioPortDevice = ioPortDev;
+            }
+            if (ioPortDevice == null)
+            {
+                Debug.Console(0, "GetVersiportDigitalInput: Device '0' is not a valid IIOPorts Device", dc.PortDeviceKey);
+                return null;
+            }
+
+            if (dc.PortNumber > ioPortDevice.NumberOfVersiPorts)
+            {
+                Debug.Console(0, "GetVersiportDigitalInput: Device {0} does not contain a port {1}", dc.PortDeviceKey, dc.PortNumber);
+            }
+
+            return ioPortDevice.VersiPorts[dc.PortNumber];
+
+
+        }
+    }
+
+
+    public class GenericVersiportDigitalInputDeviceFactory : EssentialsDeviceFactory<GenericVersiportDigitalInputDevice>
+    {
+        public GenericVersiportDigitalInputDeviceFactory()
+        {
+            TypeNames = new List<string>() { "versiportinput" };
+        }
+
+        public override EssentialsDevice BuildDevice(DeviceConfig dc)
+        {
+            Debug.Console(1, "Factory Attempting to create new Generic Versiport Device");
+
+            var props = JsonConvert.DeserializeObject<IOPortConfig>(dc.Properties.ToString());
+
+            if (props == null) return null;
+
+            var portDevice = new GenericVersiportDigitalInputDevice(dc.Key, dc.Name, GenericVersiportDigitalInputDevice.GetVersiportDigitalInput, props);
+
+            return portDevice;
+        }
     }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Crestron IO/Relay/GenericRelayDevice.cs

@@ -1,25 +1,25 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using Crestron.SimplSharp;
-using Crestron.SimplSharpPro;
-using Crestron.SimplSharpPro.DeviceSupport;
-using Newtonsoft.Json;
-using PepperDash.Core;
-using PepperDash.Essentials.Core.Bridges;
-using PepperDash.Essentials.Core.Config;
-
-namespace PepperDash.Essentials.Core.CrestronIO
-{
-    /// <summary>
-    /// Represents a generic device controlled by relays
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+using Crestron.SimplSharpPro;
+using Crestron.SimplSharpPro.DeviceSupport;
+using Newtonsoft.Json;
+using PepperDash.Core;
+using PepperDash.Essentials.Core.Bridges;
+using PepperDash.Essentials.Core.Config;
+
+namespace PepperDash.Essentials.Core.CrestronIO
+{
+    /// <summary>
+    /// Represents a generic device controlled by relays
     /// </summary>
     [Description("Wrapper class for a Relay")]
-    public class GenericRelayDevice : EssentialsBridgeableDevice, ISwitchedOutput
-    {
-        public Relay RelayOutput { get; private set; }
-
+    public class GenericRelayDevice : EssentialsBridgeableDevice, ISwitchedOutput
+    {
+        public Relay RelayOutput { get; private set; }
+
         public BoolFeedback OutputIsOnFeedback { get; private set; }
 
         //Maintained for compatibility with PepperDash.Essentials.Core.Devices.CrestronProcessor
@@ -94,11 +94,11 @@ namespace PepperDash.Essentials.Core.CrestronIO
 
         #region Events
 
-        void RelayOutput_StateChange(Relay relay, RelayEventArgs args)
-        {
+        void RelayOutput_StateChange(Relay relay, RelayEventArgs args)
+        {
             OutputIsOnFeedback.FireUpdate();
-        }
-
+        }
+
         #endregion
 
         #region Methods
@@ -119,33 +119,33 @@ namespace PepperDash.Essentials.Core.CrestronIO
                 OpenRelay();
             else
                 CloseRelay();
-        }
+        }
 
         #endregion
-
-        #region ISwitchedOutput Members
-
-        void ISwitchedOutput.On()
-        {
-            CloseRelay();
-        }
-
-        void ISwitchedOutput.Off()
-        {
-            OpenRelay();
-        }
-
+
+        #region ISwitchedOutput Members
+
+        void ISwitchedOutput.On()
+        {
+            CloseRelay();
+        }
+
+        void ISwitchedOutput.Off()
+        {
+            OpenRelay();
+        }
+
         #endregion
 
         #region Bridge Linking
 
-        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
+        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
         {
-            var joinMap = new GenericRelayControllerJoinMap(joinStart);
-
-            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
-
-            if (!string.IsNullOrEmpty(joinMapSerialized))
+            var joinMap = new GenericRelayControllerJoinMap(joinStart);
+
+            var joinMapSerialized = JoinMapHelper.GetSerializedJoinMapForDevice(joinMapKey);
+
+            if (!string.IsNullOrEmpty(joinMapSerialized))
                 joinMap = JsonConvert.DeserializeObject<GenericRelayControllerJoinMap>(joinMapSerialized);
 
             if (bridge != null)
@@ -155,26 +155,26 @@ namespace PepperDash.Essentials.Core.CrestronIO
             else
             {
                 Debug.Console(0, this, "Please update config to use 'eiscapiadvanced' to get all join map features for this device.");
-            }
-
-            if (RelayOutput == null)
-            {
-                Debug.Console(1, this, "Unable to link device '{0}'.  Relay is null", Key);
-                return;
-            }
-
-            Debug.Console(1, this, "Linking to Trilist '{0}'", trilist.ID.ToString("X"));
-
-            trilist.SetBoolSigAction(joinMap.Relay.JoinNumber, b =>
-            {
-                if (b)
-                    CloseRelay();
-                else
-                    OpenRelay();
-            });
-
-            // feedback for relay state
-
+            }
+
+            if (RelayOutput == null)
+            {
+                Debug.Console(1, this, "Unable to link device '{0}'.  Relay is null", Key);
+                return;
+            }
+
+            Debug.Console(1, this, "Linking to Trilist '{0}'", trilist.ID.ToString("X"));
+
+            trilist.SetBoolSigAction(joinMap.Relay.JoinNumber, b =>
+            {
+                if (b)
+                    CloseRelay();
+                else
+                    OpenRelay();
+            });
+
+            // feedback for relay state
+
             OutputIsOnFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Relay.JoinNumber]);
         }
 
@@ -202,54 +202,54 @@ namespace PepperDash.Essentials.Core.CrestronIO
                 return portDevice;
 
 
-                /*
-                if (props.PortDeviceKey == "processor")
-                    portDevice = Global.ControlSystem as IRelayPorts;
-                else
-                    portDevice = DeviceManager.GetDeviceForKey(props.PortDeviceKey) as IRelayPorts;
-
-                if (portDevice == null)
-                    Debug.Console(0, "Unable to add relay device with key '{0}'. Port Device does not support relays", key);
-                else
-                {
-                    var cs = (portDevice as CrestronControlSystem);
-
-                    if (cs != null)
-                    {
-                        // The relay is on a control system processor
-                        if (!cs.SupportsRelay || props.PortNumber > cs.NumberOfRelayPorts)
-                        {
-                            Debug.Console(0, "Port Device: {0} does not support relays or does not have enough relays");
-                            return null;
-                        }
-                    }
-                    else
-                    {
-                        // The relay is on another device type
-
-                        if (props.PortNumber > portDevice.NumberOfRelayPorts)
-                        {
-                            Debug.Console(0, "Port Device: {0} does not have enough relays");
-                            return null;
-                        }
-                    }
-
-                    Relay relay = portDevice.RelayPorts[props.PortNumber];
-
-                    if (!relay.Registered)
-                    {
-                        if (relay.Register() == eDeviceRegistrationUnRegistrationResponse.Success)
-                            return new GenericRelayDevice(key, relay);
-                        else
-                            Debug.Console(0, "Attempt to register relay {0} on device with key '{1}' failed.", props.PortNumber, props.PortDeviceKey);
-                    }
-                    else
-                    {
-                        return new GenericRelayDevice(key, relay);
-                    }
-
-                    // Future: Check if portDevice is 3-series card or other non control system that supports versiports
-                }
+                /*
+                if (props.PortDeviceKey == "processor")
+                    portDevice = Global.ControlSystem as IRelayPorts;
+                else
+                    portDevice = DeviceManager.GetDeviceForKey(props.PortDeviceKey) as IRelayPorts;
+
+                if (portDevice == null)
+                    Debug.Console(0, "Unable to add relay device with key '{0}'. Port Device does not support relays", key);
+                else
+                {
+                    var cs = (portDevice as CrestronControlSystem);
+
+                    if (cs != null)
+                    {
+                        // The relay is on a control system processor
+                        if (!cs.SupportsRelay || props.PortNumber > cs.NumberOfRelayPorts)
+                        {
+                            Debug.Console(0, "Port Device: {0} does not support relays or does not have enough relays");
+                            return null;
+                        }
+                    }
+                    else
+                    {
+                        // The relay is on another device type
+
+                        if (props.PortNumber > portDevice.NumberOfRelayPorts)
+                        {
+                            Debug.Console(0, "Port Device: {0} does not have enough relays");
+                            return null;
+                        }
+                    }
+
+                    Relay relay = portDevice.RelayPorts[props.PortNumber];
+
+                    if (!relay.Registered)
+                    {
+                        if (relay.Register() == eDeviceRegistrationUnRegistrationResponse.Success)
+                            return new GenericRelayDevice(key, relay);
+                        else
+                            Debug.Console(0, "Attempt to register relay {0} on device with key '{1}' failed.", props.PortNumber, props.PortDeviceKey);
+                    }
+                    else
+                    {
+                        return new GenericRelayDevice(key, relay);
+                    }
+
+                    // Future: Check if portDevice is 3-series card or other non control system that supports versiports
+                }
                 */
 
             }
@@ -258,7 +258,7 @@ namespace PepperDash.Essentials.Core.CrestronIO
         #endregion
 
 
-    }
-
-
+    }
+
+
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/DeviceTypeInterfaces/IMobileControl.cs

@@ -8,11 +8,9 @@ namespace PepperDash.Essentials.Core.DeviceTypeInterfaces
     /// </summary>
     public interface IMobileControl : IKeyed
     {
-        void CreateMobileControlRoomBridge(EssentialsRoomBase room);
+        void CreateMobileControlRoomBridge(EssentialsRoomBase room, IMobileControl parent);
 
         void LinkSystemMonitorToAppServer();
-
-
     }
 
     /// <summary>
@@ -26,6 +24,8 @@ namespace PepperDash.Essentials.Core.DeviceTypeInterfaces
 
         string QrCodeUrl { get; }
 
+        string QrCodeChecksum { get; }
+
         string McServerUrl { get; }
 
         string RoomName { get; }

essentials-framework/Essentials Core/PepperDashEssentialsBase/DeviceTypeInterfaces/INumeric.cs

@@ -1,5 +1,5 @@
 using Crestron.SimplSharpPro.DeviceSupport;
-
+using PepperDash.Core;
 using PepperDash.Essentials.Core;
 using PepperDash.Essentials.Core.SmartObjects;
 
@@ -8,7 +8,7 @@ namespace PepperDash.Essentials.Core
 	/// <summary>
 	/// 
 	/// </summary>
-	public interface INumericKeypad
+	public interface INumericKeypad:IKeyed
 	{
 		void Digit0(bool pressRelease);
 		void Digit1(bool pressRelease);

essentials-framework/Essentials Core/PepperDashEssentialsBase/DeviceTypeInterfaces/ITvPresetsProvider.cs

@@ -0,0 +1,9 @@
+using PepperDash.Essentials.Core.Presets;
+
+namespace PepperDash.Essentials.Core.DeviceTypeInterfaces
+{
+    public interface ITvPresetsProvider
+    {
+        DevicePresetsModel TvPresets { get; }
+    }
+}

essentials-framework/Essentials Core/PepperDashEssentialsBase/Devices/DeviceManager.cs

@@ -1,342 +1,355 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Text.RegularExpressions;
-using Crestron.SimplSharp;
-using Crestron.SimplSharpPro;
-
-using PepperDash.Core;
-
-
-namespace PepperDash.Essentials.Core
-{
-	public static class DeviceManager
-	{
-	    private static readonly CCriticalSection DeviceCriticalSection = new CCriticalSection();
-	    private static readonly CEvent AllowAddDevicesCEvent = new CEvent(false, true);
-		//public static List<Device> Devices { get { return _Devices; } }
-		//static List<Device> _Devices = new List<Device>();
-
-		static readonly Dictionary<string, IKeyed> Devices = new Dictionary<string, IKeyed>(StringComparer.OrdinalIgnoreCase);
-
-		/// <summary>
-		/// Returns a copy of all the devices in a list
-		/// </summary>
-		public static List<IKeyed> AllDevices { get { return new List<IKeyed>(Devices.Values); } }
-
-	    public static bool AddDeviceEnabled;
-
-		public static void Initialize(CrestronControlSystem cs)
-		{
-		    AddDeviceEnabled = true;
-			CrestronConsole.AddNewConsoleCommand(ListDeviceCommStatuses, "devcommstatus", "Lists the communication status of all devices",
-				ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(ListDeviceFeedbacks, "devfb", "Lists current feedbacks", 
-				ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(ListDevices, "devlist", "Lists current managed devices", 
-				ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(DeviceJsonApi.DoDeviceActionWithJson, "devjson", "", 
-				ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetProperties(s)), "devprops", "", ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetMethods(s)), "devmethods", "", ConsoleAccessLevelEnum.AccessOperator);
-			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetApiMethods(s)), "apimethods", "", ConsoleAccessLevelEnum.AccessOperator);
-            CrestronConsole.AddNewConsoleCommand(SimulateComReceiveOnDevice, "devsimreceive",
-                "Simulates incoming data on a com device", ConsoleAccessLevelEnum.AccessOperator);
-
-            CrestronConsole.AddNewConsoleCommand(s => SetDeviceStreamDebugging(s), "setdevicestreamdebug", "set comm debug [deviceKey] [off/rx/tx/both] ([minutes])", ConsoleAccessLevelEnum.AccessOperator);
-            CrestronConsole.AddNewConsoleCommand(s => DisableAllDeviceStreamDebugging(), "disableallstreamdebug", "disables stream debugging on all devices", ConsoleAccessLevelEnum.AccessOperator);
-        }
-
-		/// <summary>
-		/// Calls activate steps on all Device class items
-		/// </summary>
-		public static void ActivateAll()
-		{
-		    try
-		    {
-		        DeviceCriticalSection.Enter();
-                AddDeviceEnabled = false;
-		        // PreActivate all devices
-		        foreach (var d in Devices.Values)
-		        {
-		            try
-		            {
-		                if (d is Device)
-		                    (d as Device).PreActivate();
-		            }
-		            catch (Exception e)
-		            {
-		                Debug.Console(0, d, "ERROR: Device PreActivation failure:\r{0}", e);
-		            }
-		        }
-
-		        // Activate all devices
-		        foreach (var d in Devices.Values)
-		        {
-		            try
-		            {
-		                if (d is Device)
-		                    (d as Device).Activate();
-		            }
-		            catch (Exception e)
-		            {
-		                Debug.Console(0, d, "ERROR: Device Activation failure:\r{0}", e);
-		            }
-		        }
-
-		        // PostActivate all devices
-		        foreach (var d in Devices.Values)
-		        {
-		            try
-		            {
-		                if (d is Device)
-		                    (d as Device).PostActivate();
-		            }
-		            catch (Exception e)
-		            {
-		                Debug.Console(0, d, "ERROR: Device PostActivation failure:\r{0}", e);
-		            }
-		        }
-		    }
-		    finally
-		    {
-                DeviceCriticalSection.Leave();
-		    }
-		}
-
-		/// <summary>
-		/// Calls activate on all Device class items
-		/// </summary>
-		public static void DeactivateAll()
-		{
-		    try
-		    {
-		        DeviceCriticalSection.Enter();
-		        foreach (var d in Devices.Values.OfType<Device>())
-		        {
-		            d.Deactivate();
-		        }
-		    }
-		    finally
-		    {
-		        DeviceCriticalSection.Leave();
-		    }
-		}
-
-		//static void ListMethods(string devKey)
-		//{
-		//    var dev = GetDeviceForKey(devKey);
-		//    if(dev != null)
-		//    {
-		//        var type = dev.GetType().GetCType();
-		//        var methods = type.GetMethods(BindingFlags.Public|BindingFlags.Instance);
-		//        var sb = new StringBuilder();
-		//        sb.AppendLine(string.Format("{2} methods on [{0}] ({1}):", dev.Key, type.Name, methods.Length));
-		//        foreach (var m in methods)
-		//        {
-		//            sb.Append(string.Format("{0}(", m.Name));
-		//            var pars = m.GetParameters();
-		//            foreach (var p in pars)
-		//                sb.Append(string.Format("({1}){0} ", p.Name, p.ParameterType.Name));
-		//            sb.AppendLine(")");
-		//        }
-		//        CrestronConsole.ConsoleCommandResponse(sb.ToString());
-		//    }
-		//}
-
-	    private static void ListDevices(string s)
-	    {
-	        Debug.Console(0, "{0} Devices registered with Device Manager:", Devices.Count);
-	        var sorted = Devices.Values.ToList();
-	        sorted.Sort((a, b) => a.Key.CompareTo(b.Key));
-
-	        foreach (var d in sorted)
-	        {
-	            var name = d is IKeyName ? (d as IKeyName).Name : "---";
-	            Debug.Console(0, "  [{0}] {1}", d.Key, name);
-	        }
-	    }
-
-	    private static void ListDeviceFeedbacks(string devKey)
-	    {
-	        var dev = GetDeviceForKey(devKey);
-	        if (dev == null)
-	        {
-	            Debug.Console(0, "Device '{0}' not found", devKey);
-	            return;
-	        }
-	        var statusDev = dev as IHasFeedback;
-	        if (statusDev == null)
-	        {
-	            Debug.Console(0, "Device '{0}' does not have visible feedbacks", devKey);
-	            return;
-	        }
-	        statusDev.DumpFeedbacksToConsole(true);
-	    }
-
-	    //static void ListDeviceCommands(string devKey)
-        //{
-        //    var dev = GetDeviceForKey(devKey);
-        //    if (dev == null)
-        //    {
-        //        Debug.Console(0, "Device '{0}' not found", devKey);
-        //        return;
-        //    }
-        //    Debug.Console(0, "This needs to be reworked.  Stay tuned.", devKey);
-        //}
-
-	    private static void ListDeviceCommStatuses(string input)
-	    {
-	        var sb = new StringBuilder();
-	        foreach (var dev in Devices.Values.OfType<ICommunicationMonitor>())
-	        {
-	            sb.Append(string.Format("{0}: {1}\r", dev,
-	                dev.CommunicationMonitor.Status));
-	        }
-	        CrestronConsole.ConsoleCommandResponse(sb.ToString());
-	    }
-
-
-	    //static void DoDeviceCommand(string command)
-        //{
-        //    Debug.Console(0, "Not yet implemented.  Stay tuned");
-        //}
-
-		public static void AddDevice(IKeyed newDev)
-		{
-		    try
-		    {
-		        if (!DeviceCriticalSection.TryEnter())
-		        {
-		            Debug.Console(0, Debug.ErrorLogLevel.Error, "Currently unable to add devices to Device Manager. Please try again");
-		            return;
-		        }
-		        // Check for device with same key
-		        //var existingDevice = _Devices.FirstOrDefault(d => d.Key.Equals(newDev.Key, StringComparison.OrdinalIgnoreCase));
-		        ////// If it exists, remove or warn??
-		        //if (existingDevice != null)
-
-		        if (!AddDeviceEnabled)
-		        {
-		            Debug.Console(0, Debug.ErrorLogLevel.Error, "All devices have been activated. Adding new devices is not allowed.");
-		            return;
-		        }
-
-		        if (Devices.ContainsKey(newDev.Key))
-		        {
-		            Debug.Console(0, newDev, "WARNING: A device with this key already exists.  Not added to manager");
-		            return;
-		        }
-		        Devices.Add(newDev.Key, newDev);
-		        //if (!(_Devices.Contains(newDev)))
-		        //    _Devices.Add(newDev);
-		    }
-		    finally
-		    {
-		        DeviceCriticalSection.Leave();
-		    }
-		}
-
-	    public static void AddDevice(IEnumerable<IKeyed> devicesToAdd)
-	    {
-	        try
-	        {
-	            if (!DeviceCriticalSection.TryEnter())
-	            {
-	                Debug.Console(0, Debug.ErrorLogLevel.Error,
-	                    "Currently unable to add devices to Device Manager. Please try again");
-	                return;
-	            }
-	            if (!AddDeviceEnabled)
-	            {
-	                Debug.Console(0, Debug.ErrorLogLevel.Error,
-	                    "All devices have been activated. Adding new devices is not allowed.");
-	                return;
-	            }
-
-	            foreach (var dev in devicesToAdd)
-	            {
-	                try
-	                {
-	                    Devices.Add(dev.Key, dev);
-	                }
-	                catch (ArgumentException ex)
-	                {
-	                    Debug.Console(0, "Error adding device with key {0} to Device Manager: {1}\r\nStack Trace: {2}",
-	                        dev.Key, ex.Message, ex.StackTrace);
-	                }
-	            }
-	        }
-	        finally
-	        {
-	            DeviceCriticalSection.Leave();
-	        }
-	    }
-
-		public static void RemoveDevice(IKeyed newDev)
-		{
-		    try
-		    {
-                DeviceCriticalSection.Enter();
-		        if (newDev == null)
-		            return;
-		        if (Devices.ContainsKey(newDev.Key))
-		            Devices.Remove(newDev.Key);
-		            //if (_Devices.Contains(newDev))
-		            //    _Devices.Remove(newDev);
-		        else
-		            Debug.Console(0, "Device manager: Device '{0}' does not exist in manager.  Cannot remove", newDev.Key);
-		    }
-		    finally
-		    {
-		        DeviceCriticalSection.Leave();
-		    }
-		}
-
-		public static IEnumerable<string> GetDeviceKeys()
-		{
-		        //return _Devices.Select(d => d.Key).ToList();
-		        return Devices.Keys;
-		}
-
-		public static IEnumerable<IKeyed> GetDevices()
-		{
-		        //return _Devices.Select(d => d.Key).ToList();
-		        return Devices.Values;
-		}
-
-		public static IKeyed GetDeviceForKey(string key)
-		{
-		        //return _Devices.FirstOrDefault(d => d.Key.Equals(key, StringComparison.OrdinalIgnoreCase));
-		        if (key != null && Devices.ContainsKey(key))
-		            return Devices[key];
-
-		        return null;
-		}
-
-        /// <summary>
-        /// Console handler that simulates com port data receive 
-        /// </summary>
-        /// <param name="s"></param>
-        public static void SimulateComReceiveOnDevice(string s)
-        {
-            // devcomsim:1 xyzabc
-            var match = Regex.Match(s, @"(\S*)\s*(.*)");
-            if (match.Groups.Count < 3)
-            {
-                CrestronConsole.ConsoleCommandResponse("  Format: devsimreceive:P <device key> <string to send>");
-                return;
-            }
-            //Debug.Console(2, "**** {0} - {1} ****", match.Groups[1].Value, match.Groups[2].Value);
-
-            var com = GetDeviceForKey(match.Groups[1].Value) as ComPortController;
-            if (com == null)
-            {
-                CrestronConsole.ConsoleCommandResponse("'{0}' is not a comm port device", match.Groups[1].Value);
-                return;
-            }
-            com.SimulateReceive(match.Groups[2].Value);
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Text.RegularExpressions;
+using Crestron.SimplSharp;
+using Crestron.SimplSharpPro;
+
+using PepperDash.Core;
+
+
+namespace PepperDash.Essentials.Core
+{
+	public static class DeviceManager
+	{
+        public static event EventHandler<EventArgs> AllDevicesActivated;
+
+	    private static readonly CCriticalSection DeviceCriticalSection = new CCriticalSection();
+	    private static readonly CEvent AllowAddDevicesCEvent = new CEvent(false, true);
+		//public static List<Device> Devices { get { return _Devices; } }
+		//static List<Device> _Devices = new List<Device>();
+
+		static readonly Dictionary<string, IKeyed> Devices = new Dictionary<string, IKeyed>(StringComparer.OrdinalIgnoreCase);
+
+		/// <summary>
+		/// Returns a copy of all the devices in a list
+		/// </summary>
+		public static List<IKeyed> AllDevices { get { return new List<IKeyed>(Devices.Values); } }
+
+	    public static bool AddDeviceEnabled;
+
+		public static void Initialize(CrestronControlSystem cs)
+		{
+		    AddDeviceEnabled = true;
+			CrestronConsole.AddNewConsoleCommand(ListDeviceCommStatuses, "devcommstatus", "Lists the communication status of all devices",
+				ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(ListDeviceFeedbacks, "devfb", "Lists current feedbacks", 
+				ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(ListDevices, "devlist", "Lists current managed devices", 
+				ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(DeviceJsonApi.DoDeviceActionWithJson, "devjson", "", 
+				ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetProperties(s)), "devprops", "", ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetMethods(s)), "devmethods", "", ConsoleAccessLevelEnum.AccessOperator);
+			CrestronConsole.AddNewConsoleCommand(s => CrestronConsole.ConsoleCommandResponse(DeviceJsonApi.GetApiMethods(s)), "apimethods", "", ConsoleAccessLevelEnum.AccessOperator);
+            CrestronConsole.AddNewConsoleCommand(SimulateComReceiveOnDevice, "devsimreceive",
+                "Simulates incoming data on a com device", ConsoleAccessLevelEnum.AccessOperator);
+
+            CrestronConsole.AddNewConsoleCommand(s => SetDeviceStreamDebugging(s), "setdevicestreamdebug", "set comm debug [deviceKey] [off/rx/tx/both] ([minutes])", ConsoleAccessLevelEnum.AccessOperator);
+            CrestronConsole.AddNewConsoleCommand(s => DisableAllDeviceStreamDebugging(), "disableallstreamdebug", "disables stream debugging on all devices", ConsoleAccessLevelEnum.AccessOperator);
+        }
+
+		/// <summary>
+		/// Calls activate steps on all Device class items
+		/// </summary>
+		public static void ActivateAll()
+		{
+		    try
+		    {
+		        DeviceCriticalSection.Enter();
+                AddDeviceEnabled = false;
+		        // PreActivate all devices
+		        foreach (var d in Devices.Values)
+		        {
+		            try
+		            {
+		                if (d is Device)
+		                    (d as Device).PreActivate();
+		            }
+		            catch (Exception e)
+		            {
+		                Debug.Console(0, d, "ERROR: Device PreActivation failure:\r{0}", e);
+		            }
+		        }
+
+		        // Activate all devices
+		        foreach (var d in Devices.Values)
+		        {
+		            try
+		            {
+		                if (d is Device)
+		                    (d as Device).Activate();
+		            }
+		            catch (Exception e)
+		            {
+		                Debug.Console(0, d, "ERROR: Device Activation failure:\r{0}", e);
+		            }
+		        }
+
+		        // PostActivate all devices
+		        foreach (var d in Devices.Values)
+		        {
+		            try
+		            {
+		                if (d is Device)
+		                    (d as Device).PostActivate();
+		            }
+		            catch (Exception e)
+		            {
+		                Debug.Console(0, d, "ERROR: Device PostActivation failure:\r{0}", e);
+		            }
+		        }
+
+                OnAllDevicesActivated();
+		    }
+		    finally
+		    {
+                DeviceCriticalSection.Leave();
+		    }
+		}
+
+        private static void OnAllDevicesActivated()
+        {
+            var handler = AllDevicesActivated;
+            if (handler != null)
+            {
+                handler(null, new EventArgs());
+            }
+        }
+
+		/// <summary>
+		/// Calls activate on all Device class items
+		/// </summary>
+		public static void DeactivateAll()
+		{
+		    try
+		    {
+		        DeviceCriticalSection.Enter();
+		        foreach (var d in Devices.Values.OfType<Device>())
+		        {
+		            d.Deactivate();
+		        }
+		    }
+		    finally
+		    {
+		        DeviceCriticalSection.Leave();
+		    }
+		}
+
+		//static void ListMethods(string devKey)
+		//{
+		//    var dev = GetDeviceForKey(devKey);
+		//    if(dev != null)
+		//    {
+		//        var type = dev.GetType().GetCType();
+		//        var methods = type.GetMethods(BindingFlags.Public|BindingFlags.Instance);
+		//        var sb = new StringBuilder();
+		//        sb.AppendLine(string.Format("{2} methods on [{0}] ({1}):", dev.Key, type.Name, methods.Length));
+		//        foreach (var m in methods)
+		//        {
+		//            sb.Append(string.Format("{0}(", m.Name));
+		//            var pars = m.GetParameters();
+		//            foreach (var p in pars)
+		//                sb.Append(string.Format("({1}){0} ", p.Name, p.ParameterType.Name));
+		//            sb.AppendLine(")");
+		//        }
+		//        CrestronConsole.ConsoleCommandResponse(sb.ToString());
+		//    }
+		//}
+
+	    private static void ListDevices(string s)
+	    {
+	        Debug.Console(0, "{0} Devices registered with Device Manager:", Devices.Count);
+	        var sorted = Devices.Values.ToList();
+	        sorted.Sort((a, b) => a.Key.CompareTo(b.Key));
+
+	        foreach (var d in sorted)
+	        {
+	            var name = d is IKeyName ? (d as IKeyName).Name : "---";
+	            Debug.Console(0, "  [{0}] {1}", d.Key, name);
+	        }
+	    }
+
+	    private static void ListDeviceFeedbacks(string devKey)
+	    {
+	        var dev = GetDeviceForKey(devKey);
+	        if (dev == null)
+	        {
+	            Debug.Console(0, "Device '{0}' not found", devKey);
+	            return;
+	        }
+	        var statusDev = dev as IHasFeedback;
+	        if (statusDev == null)
+	        {
+	            Debug.Console(0, "Device '{0}' does not have visible feedbacks", devKey);
+	            return;
+	        }
+	        statusDev.DumpFeedbacksToConsole(true);
+	    }
+
+	    //static void ListDeviceCommands(string devKey)
+        //{
+        //    var dev = GetDeviceForKey(devKey);
+        //    if (dev == null)
+        //    {
+        //        Debug.Console(0, "Device '{0}' not found", devKey);
+        //        return;
+        //    }
+        //    Debug.Console(0, "This needs to be reworked.  Stay tuned.", devKey);
+        //}
+
+	    private static void ListDeviceCommStatuses(string input)
+	    {
+	        var sb = new StringBuilder();
+	        foreach (var dev in Devices.Values.OfType<ICommunicationMonitor>())
+	        {
+	            sb.Append(string.Format("{0}: {1}\r", dev,
+	                dev.CommunicationMonitor.Status));
+	        }
+	        CrestronConsole.ConsoleCommandResponse(sb.ToString());
+	    }
+
+
+	    //static void DoDeviceCommand(string command)
+        //{
+        //    Debug.Console(0, "Not yet implemented.  Stay tuned");
+        //}
+
+		public static void AddDevice(IKeyed newDev)
+		{
+		    try
+		    {
+		        if (!DeviceCriticalSection.TryEnter())
+		        {
+		            Debug.Console(0, Debug.ErrorLogLevel.Error, "Currently unable to add devices to Device Manager. Please try again");
+		            return;
+		        }
+		        // Check for device with same key
+		        //var existingDevice = _Devices.FirstOrDefault(d => d.Key.Equals(newDev.Key, StringComparison.OrdinalIgnoreCase));
+		        ////// If it exists, remove or warn??
+		        //if (existingDevice != null)
+
+		        if (!AddDeviceEnabled)
+		        {
+		            Debug.Console(0, Debug.ErrorLogLevel.Error, "All devices have been activated. Adding new devices is not allowed.");
+		            return;
+		        }
+
+		        if (Devices.ContainsKey(newDev.Key))
+		        {
+		            Debug.Console(0, newDev, "WARNING: A device with this key already exists.  Not added to manager");
+		            return;
+		        }
+		        Devices.Add(newDev.Key, newDev);
+		        //if (!(_Devices.Contains(newDev)))
+		        //    _Devices.Add(newDev);
+		    }
+		    finally
+		    {
+		        DeviceCriticalSection.Leave();
+		    }
+		}
+
+	    public static void AddDevice(IEnumerable<IKeyed> devicesToAdd)
+	    {
+	        try
+	        {
+	            if (!DeviceCriticalSection.TryEnter())
+	            {
+	                Debug.Console(0, Debug.ErrorLogLevel.Error,
+	                    "Currently unable to add devices to Device Manager. Please try again");
+	                return;
+	            }
+	            if (!AddDeviceEnabled)
+	            {
+	                Debug.Console(0, Debug.ErrorLogLevel.Error,
+	                    "All devices have been activated. Adding new devices is not allowed.");
+	                return;
+	            }
+
+	            foreach (var dev in devicesToAdd)
+	            {
+	                try
+	                {
+	                    Devices.Add(dev.Key, dev);
+	                }
+	                catch (ArgumentException ex)
+	                {
+	                    Debug.Console(0, "Error adding device with key {0} to Device Manager: {1}\r\nStack Trace: {2}",
+	                        dev.Key, ex.Message, ex.StackTrace);
+	                }
+	            }
+	        }
+	        finally
+	        {
+	            DeviceCriticalSection.Leave();
+	        }
+	    }
+
+		public static void RemoveDevice(IKeyed newDev)
+		{
+		    try
+		    {
+                DeviceCriticalSection.Enter();
+		        if (newDev == null)
+		            return;
+		        if (Devices.ContainsKey(newDev.Key))
+		            Devices.Remove(newDev.Key);
+		            //if (_Devices.Contains(newDev))
+		            //    _Devices.Remove(newDev);
+		        else
+		            Debug.Console(0, "Device manager: Device '{0}' does not exist in manager.  Cannot remove", newDev.Key);
+		    }
+		    finally
+		    {
+		        DeviceCriticalSection.Leave();
+		    }
+		}
+
+		public static IEnumerable<string> GetDeviceKeys()
+		{
+		        //return _Devices.Select(d => d.Key).ToList();
+		        return Devices.Keys;
+		}
+
+		public static IEnumerable<IKeyed> GetDevices()
+		{
+		        //return _Devices.Select(d => d.Key).ToList();
+		        return Devices.Values;
+		}
+
+		public static IKeyed GetDeviceForKey(string key)
+		{
+		        //return _Devices.FirstOrDefault(d => d.Key.Equals(key, StringComparison.OrdinalIgnoreCase));
+		        if (key != null && Devices.ContainsKey(key))
+		            return Devices[key];
+
+		        return null;
+		}
+
+        /// <summary>
+        /// Console handler that simulates com port data receive 
+        /// </summary>
+        /// <param name="s"></param>
+        public static void SimulateComReceiveOnDevice(string s)
+        {
+            // devcomsim:1 xyzabc
+            var match = Regex.Match(s, @"(\S*)\s*(.*)");
+            if (match.Groups.Count < 3)
+            {
+                CrestronConsole.ConsoleCommandResponse("  Format: devsimreceive:P <device key> <string to send>");
+                return;
+            }
+            //Debug.Console(2, "**** {0} - {1} ****", match.Groups[1].Value, match.Groups[2].Value);
+
+            var com = GetDeviceForKey(match.Groups[1].Value) as ComPortController;
+            if (com == null)
+            {
+                CrestronConsole.ConsoleCommandResponse("'{0}' is not a comm port device", match.Groups[1].Value);
+                return;
+            }
+            com.SimulateReceive(match.Groups[2].Value);
         }
 
         /// <summary>
@@ -366,82 +379,82 @@ namespace PepperDash.Essentials.Core
 	                Debug.Console(0, "{0}", routingOutputPort.Key);
 	            }
 	        }
-	    }
-
-        /// <summary>
-        /// Attempts to set the debug level of a device
-        /// </summary>
-        /// <param name="s"></param>
-        public static void SetDeviceStreamDebugging(string s)
-        {
-            var args = s.Split(' ');
-
-            var deviceKey = args[0];
-            var setting = args[1];
-
-            var timeout= String.Empty;
-
-            if (args.Length >= 3)
-            {
-                timeout = args[2];
-            }
-
-            var device = GetDeviceForKey(deviceKey) as IStreamDebugging;
-
-            if (device == null)
-            {
-                Debug.Console(0, "Unable to get device with key: {0}", deviceKey);
-                return;
-            }
-
-            eStreamDebuggingSetting debugSetting;
-
-            try
-            {
-                debugSetting = (eStreamDebuggingSetting)Enum.Parse(typeof(eStreamDebuggingSetting), setting, true);
-            }
-            catch
-            {
-                Debug.Console(0, "Unable to convert setting value.  Please use off/rx/tx/both");
-                return;
-            }
-
-            if (!string.IsNullOrEmpty(timeout))
-            {
-                try
-                {
-                    var min = Convert.ToUInt32(timeout);
-
-                    device.StreamDebugging.SetDebuggingWithSpecificTimeout(debugSetting, min);
-                    Debug.Console(0, "Device: '{0}' debug level set to {1) for {2} minutes", deviceKey, debugSetting, min);
-
-                }
-                catch (Exception e)
-                {
-                    Debug.Console(0, "Unable to convert minutes or settings value.  Please use an integer value for minutes. Errro: {0}", e);
-                }
-            }
-            else
-            {
-                device.StreamDebugging.SetDebuggingWithDefaultTimeout(debugSetting);
-                Debug.Console(0, "Device: '{0}' debug level set to {1) for default time (30 minutes)", deviceKey, debugSetting);
-            }
-        }
-
-        /// <summary>
-        /// Sets stream debugging settings to off for all devices
-        /// </summary>
-        public static void DisableAllDeviceStreamDebugging()
-        {
-            foreach (var device in AllDevices)
-            {
-                var streamDevice = device as IStreamDebugging;
-
-                if (streamDevice != null)
-                {
-                    streamDevice.StreamDebugging.SetDebuggingWithDefaultTimeout(eStreamDebuggingSetting.Off);
-                }
-            }
-        }
-	}
+	    }
+
+        /// <summary>
+        /// Attempts to set the debug level of a device
+        /// </summary>
+        /// <param name="s"></param>
+        public static void SetDeviceStreamDebugging(string s)
+        {
+            var args = s.Split(' ');
+
+            var deviceKey = args[0];
+            var setting = args[1];
+
+            var timeout= String.Empty;
+
+            if (args.Length >= 3)
+            {
+                timeout = args[2];
+            }
+
+            var device = GetDeviceForKey(deviceKey) as IStreamDebugging;
+
+            if (device == null)
+            {
+                Debug.Console(0, "Unable to get device with key: {0}", deviceKey);
+                return;
+            }
+
+            eStreamDebuggingSetting debugSetting;
+
+            try
+            {
+                debugSetting = (eStreamDebuggingSetting)Enum.Parse(typeof(eStreamDebuggingSetting), setting, true);
+            }
+            catch
+            {
+                Debug.Console(0, "Unable to convert setting value.  Please use off/rx/tx/both");
+                return;
+            }
+
+            if (!string.IsNullOrEmpty(timeout))
+            {
+                try
+                {
+                    var min = Convert.ToUInt32(timeout);
+
+                    device.StreamDebugging.SetDebuggingWithSpecificTimeout(debugSetting, min);
+                    Debug.Console(0, "Device: '{0}' debug level set to {1) for {2} minutes", deviceKey, debugSetting, min);
+
+                }
+                catch (Exception e)
+                {
+                    Debug.Console(0, "Unable to convert minutes or settings value.  Please use an integer value for minutes. Errro: {0}", e);
+                }
+            }
+            else
+            {
+                device.StreamDebugging.SetDebuggingWithDefaultTimeout(debugSetting);
+                Debug.Console(0, "Device: '{0}' debug level set to {1) for default time (30 minutes)", deviceKey, debugSetting);
+            }
+        }
+
+        /// <summary>
+        /// Sets stream debugging settings to off for all devices
+        /// </summary>
+        public static void DisableAllDeviceStreamDebugging()
+        {
+            foreach (var device in AllDevices)
+            {
+                var streamDevice = device as IStreamDebugging;
+
+                if (streamDevice != null)
+                {
+                    streamDevice.StreamDebugging.SetDebuggingWithDefaultTimeout(eStreamDebuggingSetting.Off);
+                }
+            }
+        }
+	}
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Display/BasicIrDisplay.cs

@@ -20,7 +20,8 @@ namespace PepperDash.Essentials.Core
 		public IrOutputPortController IrPort { get; private set; }
 		public ushort IrPulseTime { get; set; }
 
-        public BoolFeedback PowerIsOnFeedback { get; private set; }
+        [Obsolete("This property will be removed in version 2.0.0")]
+        public override BoolFeedback PowerIsOnFeedback { get; protected set; }
 
         protected Func<bool> PowerIsOnFeedbackFunc
         {

essentials-framework/Essentials Core/PepperDashEssentialsBase/Display/DisplayBase.cs

@@ -18,7 +18,7 @@ namespace PepperDash.Essentials.Core
 	/// <summary>
 	/// 
 	/// </summary>
-    public abstract class DisplayBase : EssentialsDevice, IHasFeedback, IRoutingSinkWithSwitching, IHasPowerControl, IWarmingCooling, IUsageTracking
+    public abstract class DisplayBase : EssentialsDevice, IHasFeedback, IRoutingSinkWithSwitching, IHasPowerControl, IWarmingCooling, IUsageTracking, IPower
 	{
         public event SourceInfoChangeHandler CurrentSourceChange;
 
@@ -49,6 +49,9 @@ namespace PepperDash.Essentials.Core
 		public BoolFeedback IsCoolingDownFeedback { get; protected set; }
 		public BoolFeedback IsWarmingUpFeedback { get; private set; }
 
+        [Obsolete("This property will be removed in version 2.0.0")]
+        public abstract BoolFeedback PowerIsOnFeedback { get; protected set; }
+
         public UsageTracking UsageTracker { get; set; }
 
 		public uint WarmupTime { get; set; }
@@ -81,8 +84,6 @@ namespace PepperDash.Essentials.Core
 
 		}
 
-
-
 		public abstract void PowerOn();
 		public abstract void PowerOff();
 		public abstract void PowerToggle();
@@ -99,7 +100,7 @@ namespace PepperDash.Essentials.Core
 			}
 		}
 
-		public abstract void ExecuteSwitch(object selector);
+	    public abstract void ExecuteSwitch(object selector);
 
 	    protected void LinkDisplayToApi(DisplayBase displayDevice, BasicTriList trilist, uint joinStart, string joinMapKey,
 	        EiscApiAdvanced bridge)
@@ -261,7 +262,8 @@ namespace PepperDash.Essentials.Core
 
         abstract protected Func<string> CurrentInputFeedbackFunc { get; }
 
-        public BoolFeedback PowerIsOnFeedback { get; protected set; }
+        public override BoolFeedback PowerIsOnFeedback { get; protected set; }
+
         abstract protected Func<bool> PowerIsOnFeedbackFunc { get; }
 
 
@@ -315,7 +317,5 @@ namespace PepperDash.Essentials.Core
             var newEvent = NumericSwitchChange;
             if (newEvent != null) newEvent(this, e);
         }
-
-
 	}
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Fusion/EssentialsHuddleSpaceRoomFusionRoomJoinMap.cs

@@ -0,0 +1,150 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+
+using PepperDash.Essentials.Core.Bridges;
+
+
+namespace PepperDash.Essentials.Core.Fusion
+{
+    public class EssentialsHuddleSpaceRoomFusionRoomJoinMap : JoinMapBaseAdvanced
+    {
+
+        // Processor Attributes
+        [JoinName("ProcessorIp1")]
+        public JoinDataComplete ProcessorIp1 = new JoinDataComplete(new JoinData { JoinNumber = 50, JoinSpan = 1, AttributeName = "Info - Processor - IP 1" },
+            new JoinMetadata { Description = "Info - Processor - IP 1", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorIp2")]
+        public JoinDataComplete ProcessorIp2 = new JoinDataComplete(new JoinData { JoinNumber = 51, JoinSpan = 1, AttributeName = "Info - Processor - IP 2" },
+            new JoinMetadata { Description = "Info - Processor - IP 2", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorGateway")]
+        public JoinDataComplete ProcessorGateway = new JoinDataComplete(new JoinData { JoinNumber = 52, JoinSpan = 1, AttributeName = "Info - Processor - Gateway" },
+            new JoinMetadata { Description = "Info - Processor - Gateway", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorHostname")]
+        public JoinDataComplete ProcessorHostname = new JoinDataComplete(new JoinData { JoinNumber = 53, JoinSpan = 1, AttributeName = "Info - Processor - Hostname" },
+            new JoinMetadata { Description = "Info - Processor - Hostname", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorDomain")]
+        public JoinDataComplete ProcessorDomain = new JoinDataComplete(new JoinData { JoinNumber = 54, JoinSpan = 1, AttributeName = "Info - Processor - Domain" },
+            new JoinMetadata { Description = "Info - Processor - Domain", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorDns1")]
+        public JoinDataComplete ProcessorDns1 = new JoinDataComplete(new JoinData { JoinNumber = 55, JoinSpan = 1, AttributeName = "Info - Processor - DNS 1" },
+            new JoinMetadata { Description = "Info - Processor - DNS 1", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorDns2")]
+        public JoinDataComplete ProcessorDns2 = new JoinDataComplete(new JoinData { JoinNumber = 56, JoinSpan = 1, AttributeName = "Info - Processor - DNS 2" },
+            new JoinMetadata { Description = "Info - Processor - DNS 2", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorMac1")]
+        public JoinDataComplete ProcessorMac1 = new JoinDataComplete(new JoinData { JoinNumber = 57, JoinSpan = 1, AttributeName = "Info - Processor - MAC 1" },
+            new JoinMetadata { Description = "Info - Processor - MAC 1", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorMac2")]
+        public JoinDataComplete ProcessorMac2 = new JoinDataComplete(new JoinData { JoinNumber = 58, JoinSpan = 1, AttributeName = "Info - Processor - MAC 2" },
+            new JoinMetadata { Description = "Info - Processor - MAC 2", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorNetMask1")]
+        public JoinDataComplete ProcessorNetMask1 = new JoinDataComplete(new JoinData { JoinNumber = 59, JoinSpan = 1, AttributeName = "Info - Processor - Net Mask 1" },
+            new JoinMetadata { Description = "Info - Processor - Net Mask 1", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorNetMask2")]
+        public JoinDataComplete ProcessorNetMask2 = new JoinDataComplete(new JoinData { JoinNumber = 60, JoinSpan = 1, AttributeName = "Info - Processor - Net Mask 2" },
+            new JoinMetadata { Description = "Info - Processor - Net Mask 2", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorFirmware")]
+        public JoinDataComplete ProcessorFirmware = new JoinDataComplete(new JoinData { JoinNumber = 61, JoinSpan = 1, AttributeName = "Info - Processor - Firmware" },
+            new JoinMetadata { Description = "Info - Processor - Firmware", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProgramNameStart")]
+        public JoinDataComplete ProgramNameStart = new JoinDataComplete(new JoinData { JoinNumber = 62, JoinSpan = 10, AttributeName = "Info - Processor - Program" },
+            new JoinMetadata { Description = "Info - Processor - Program", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("ProcessorReboot")]
+        public JoinDataComplete ProcessorReboot = new JoinDataComplete(new JoinData { JoinNumber = 74, JoinSpan = 1, AttributeName = "Processor - Reboot" },
+            new JoinMetadata { Description = "Processor - Reboot", JoinCapabilities = eJoinCapabilities.FromFusion, JoinType = eJoinType.Digital });
+
+        // Volume Controls
+        [JoinName("VolumeFader1")]
+        public JoinDataComplete VolumeFader1 = new JoinDataComplete(new JoinData { JoinNumber = 50, JoinSpan = 1, AttributeName = "Volume - Fader01" },
+            new JoinMetadata { Description = "Volume - Fader01", JoinCapabilities = eJoinCapabilities.ToFromFusion, JoinType = eJoinType.Analog });
+
+        // Codec Info
+        [JoinName("VcCodecInCall")]
+        public JoinDataComplete VcCodecInCall = new JoinDataComplete(new JoinData { JoinNumber = 69, JoinSpan = 1, AttributeName = "Conf - VC 1 In Call" },
+            new JoinMetadata { Description = "Conf - VC 1 In Call", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("VcCodecOnline")]
+        public JoinDataComplete VcCodecOnline = new JoinDataComplete(new JoinData { JoinNumber = 122, JoinSpan = 1, AttributeName = "Online - VC 1" },
+            new JoinMetadata { Description = "Online - VC 1", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("VcCodecIpAddress")]
+        public JoinDataComplete VcCodecIpAddress = new JoinDataComplete(new JoinData { JoinNumber = 121, JoinSpan = 1, AttributeName = "IP Address - VC" },
+            new JoinMetadata { Description = "IP Address - VC", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        [JoinName("VcCodecIpPort")]
+        public JoinDataComplete VcCodecIpPort = new JoinDataComplete(new JoinData { JoinNumber = 150, JoinSpan = 1, AttributeName = "IP Port - VC" },
+            new JoinMetadata { Description = "IP Port - VC", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+        // Source Attributes 
+        [JoinName("Display1CurrentSourceName")]
+        public JoinDataComplete Display1CurrentSourceName = new JoinDataComplete(new JoinData { JoinNumber = 84, JoinSpan = 1, AttributeName = "Display 1 - Current Source" },
+            new JoinMetadata { Description = "Display 1 - Current Source", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Serial });
+
+
+        // Device Online Status
+        [JoinName("TouchpanelOnlineStart")]
+        public JoinDataComplete TouchpanelOnlineStart = new JoinDataComplete(new JoinData { JoinNumber = 150, JoinSpan = 10, AttributeName = "Online - Touch Panel" },
+            new JoinMetadata { Description = "Online - Touch Panel", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("XpanelOnlineStart")]
+        public JoinDataComplete XpanelOnlineStart = new JoinDataComplete(new JoinData { JoinNumber = 160, JoinSpan = 5, AttributeName = "Online - XPanel" },
+            new JoinMetadata { Description = "Online - XPanel", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("DisplayOnlineStart")]
+        public JoinDataComplete DisplayOnlineStart = new JoinDataComplete(new JoinData { JoinNumber = 170, JoinSpan = 10, AttributeName = "Online - Display" },
+            new JoinMetadata { Description = "Online - Display", JoinCapabilities = eJoinCapabilities.ToFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("Display1LaptopSourceStart")]
+        public JoinDataComplete Display1LaptopSourceStart = new JoinDataComplete(new JoinData { JoinNumber = 166, JoinSpan = 5, AttributeName = "Display 1 - Source Laptop" },
+            new JoinMetadata { Description = "Display 1 - Source Laptop", JoinCapabilities = eJoinCapabilities.ToFromFusion, JoinType = eJoinType.Digital });
+        
+        [JoinName("Display1DiscPlayerSourceStart")]
+        public JoinDataComplete Display1DiscPlayerSourceStart = new JoinDataComplete(new JoinData { JoinNumber = 181, JoinSpan = 5, AttributeName = "Display 1 - Source Disc Player" },
+            new JoinMetadata { Description = "Display 1 - Source Disc Player", JoinCapabilities = eJoinCapabilities.ToFromFusion, JoinType = eJoinType.Digital });
+
+        [JoinName("Display1SetTopBoxSourceStart")]
+        public JoinDataComplete Display1SetTopBoxSourceStart = new JoinDataComplete(new JoinData { JoinNumber = 188, JoinSpan = 5, AttributeName = "Display 1 - Source TV" },
+            new JoinMetadata { Description = "Display 1 - Source TV", JoinCapabilities = eJoinCapabilities.ToFromFusion, JoinType = eJoinType.Digital });
+
+        // Display 1 
+        [JoinName("Display1Start")]
+        public JoinDataComplete Display1Start = new JoinDataComplete(new JoinData { JoinNumber = 158, JoinSpan = 1 },
+            new JoinMetadata { Description = "Display 1 Start", JoinCapabilities = eJoinCapabilities.ToFromFusion, JoinType = eJoinType.Digital });
+
+
+        /// <summary>
+        /// Constructor to use when instantiating this Join Map without inheriting from it
+        /// </summary>
+        /// <param name="joinStart">Join this join map will start at</param>
+        public EssentialsHuddleSpaceRoomFusionRoomJoinMap(uint joinStart)
+            : base(joinStart, typeof(EssentialsHuddleSpaceRoomFusionRoomJoinMap))
+        {
+
+        }
+
+        /// <summary>
+        /// Constructor to use when extending this Join map
+        /// </summary>
+        /// <param name="joinStart">Join this join map will start at</param>
+        /// <param name="type">Type of the child join map</param>
+        public EssentialsHuddleSpaceRoomFusionRoomJoinMap(uint joinStart, Type type) : base(joinStart, type)
+        {
+        }
+    }   
+}

essentials-framework/Essentials Core/PepperDashEssentialsBase/Global/Scheduler.cs

@@ -1,11 +1,14 @@
 using System;
 using System.Collections.Generic;
 using System.Linq;
-using System.Text;
 using Crestron.SimplSharp;
+using Crestron.SimplSharp.Reflection;
 using Crestron.SimplSharp.Scheduler;
 
 using PepperDash.Core;
+using PepperDash.Essentials.Core.Fusion;
+using PepperDash.Essentials.Room.Config;
+using Activator = System.Activator;
 
 namespace PepperDash.Essentials.Core
 {
@@ -14,7 +17,7 @@ namespace PepperDash.Essentials.Core
     /// </summary>
     public static class Scheduler
     {
-        private static Dictionary<string, ScheduledEventGroup> EventGroups = new Dictionary<string,ScheduledEventGroup>();
+        private static readonly Dictionary<string, ScheduledEventGroup> EventGroups = new Dictionary<string,ScheduledEventGroup>();
 
         static Scheduler()
         {
@@ -49,7 +52,6 @@ namespace PepperDash.Essentials.Core
         /// <summary>
         /// Adds the event group to the global list
         /// </summary>
-        /// <param name="name"></param>
         /// <returns></returns>
         public static void AddEventGroup(ScheduledEventGroup eventGroup)
         {
@@ -67,6 +69,13 @@ namespace PepperDash.Essentials.Core
             if(!EventGroups.ContainsKey(eventGroup.Name))
                 EventGroups.Remove(eventGroup.Name);
         }
+
+        public static ScheduledEventGroup GetEventGroup(string key)
+        {
+            ScheduledEventGroup returnValue;
+
+            return EventGroups.TryGetValue(key, out returnValue) ? returnValue : null;
+        }
     }
 
     public static class SchedulerUtilities
@@ -135,5 +144,90 @@ namespace PepperDash.Essentials.Core
 
             return isMatch;
         }
+
+        public static bool CheckEventTimeForMatch(ScheduledEvent evnt, DateTime time)
+        {
+            return evnt.DateAndTime.Hour == time.Hour && evnt.DateAndTime.Minute == time.Minute;
+        }
+
+        public static bool CheckEventRecurrenceForMatch(ScheduledEvent evnt, ScheduledEventCommon.eWeekDays days)
+        {
+            return evnt.Recurrence.RecurrenceDays == days;
+        }
+
+        public static void CreateEventFromConfig(ScheduledEventConfig config, ScheduledEventGroup group, ScheduledEvent.UserEventCallBack handler)
+        {
+            if (group == null)
+            {
+                Debug.Console(0, "Unable to create event. Group is null");
+                return;
+            }
+            var scheduledEvent = new ScheduledEvent(config.Key, group)
+            {
+                Acknowledgeable = config.Acknowledgeable,
+                Persistent = config.Persistent
+            };
+
+            scheduledEvent.UserCallBack += handler;
+
+            scheduledEvent.DateAndTime.SetFirstDayOfWeek(ScheduledEventCommon.eFirstDayOfWeek.Sunday);
+
+            var eventTime = DateTime.Parse(config.Time);
+
+            if (DateTime.Now > eventTime)
+            {
+                eventTime = eventTime.AddDays(1);
+            }
+
+            Debug.Console(2, "[Scheduler] Current Date day of week: {0} recurrence days: {1}", eventTime.DayOfWeek,
+                config.Days);
+
+            var dayOfWeekConverted = ConvertDayOfWeek(eventTime);
+
+            Debug.Console(1, "[Scheduler] eventTime Day: {0}", dayOfWeekConverted);
+
+            while (!dayOfWeekConverted.IsFlagSet(config.Days))
+            {
+                eventTime = eventTime.AddDays(1);
+
+                dayOfWeekConverted = ConvertDayOfWeek(eventTime);
+            }
+
+            scheduledEvent.DateAndTime.SetAbsoluteEventTime(eventTime);
+
+            scheduledEvent.Recurrence.Weekly(config.Days);
+
+            if (config.Enable)
+            {
+                scheduledEvent.Enable();
+            }
+            else
+            {
+                scheduledEvent.Disable();
+            }
+        }
+
+        private static ScheduledEventCommon.eWeekDays ConvertDayOfWeek(DateTime eventTime)
+        {
+            return (ScheduledEventCommon.eWeekDays) Enum.Parse(typeof(ScheduledEventCommon.eWeekDays), eventTime.DayOfWeek.ToString(), true);
+        }
+
+        private static bool IsFlagSet<T>(this T value, T flag) where T : struct
+        {
+            CheckIsEnum<T>(true);
+
+            var lValue = Convert.ToInt64(value);
+            var lFlag = Convert.ToInt64(flag);
+
+            return (lValue & lFlag) != 0;
+        }
+
+        private static void CheckIsEnum<T>(bool withFlags)
+        {
+            if (!typeof(T).IsEnum)
+                throw new ArgumentException(string.Format("Type '{0}' is not an enum", typeof(T).FullName));
+            if (withFlags && !Attribute.IsDefined(typeof(T), typeof(FlagsAttribute)))
+                throw new ArgumentException(string.Format("Type '{0}' doesn't have the 'Flags' attribute", typeof(T).FullName));
+        }
     }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/JoinMaps/JoinMapBase.cs

@@ -25,7 +25,7 @@ namespace PepperDash.Essentials.Core
 
             var joinMap = ConfigReader.ConfigObject.JoinMaps[joinMapKey];
 
-            return joinMap;
+            return joinMap.ToString();
         }
 
         /// <summary>
@@ -45,16 +45,33 @@ namespace PepperDash.Essentials.Core
         /// <returns></returns>
         public static Dictionary<string, JoinData> TryGetJoinMapAdvancedForDevice(string joinMapKey)
         {
-            if (string.IsNullOrEmpty(joinMapKey))
+            try
+            {
+                if (string.IsNullOrEmpty(joinMapKey))
+                    return null;
+
+                if (!ConfigReader.ConfigObject.JoinMaps.ContainsKey(joinMapKey))
+                {
+                    Debug.Console(2, "No Join Map found in config with key: '{0}'", joinMapKey);
+                    return null;
+                }
+
+                Debug.Console(2, "Attempting to load custom join map with key: {0}", joinMapKey);
+
+                var joinMapJToken = ConfigReader.ConfigObject.JoinMaps[joinMapKey];
+
+                if (joinMapJToken == null)
+                    return null;
+
+                var joinMapData = joinMapJToken.ToObject<Dictionary<string, JoinData>>();
+
+                return joinMapData;
+            }
+            catch (Exception e)
+            {
+                Debug.Console(2, "Error getting join map for key: '{0}'.  Error: {1}", joinMapKey, e);
                 return null;
-
-            var joinMapSerialzed = ConfigReader.ConfigObject.JoinMaps[joinMapKey];
-
-            if (joinMapSerialzed == null) return null;
-
-            var joinMapData = JsonConvert.DeserializeObject<Dictionary<string, JoinData>>(joinMapSerialzed);
-
-            return joinMapData;
+            }
         }
 
     }
@@ -266,7 +283,7 @@ namespace PepperDash.Essentials.Core
                     @"Join Number: {0} | JoinSpan: '{1}' | Description: '{2}' | Type: '{3}' | Capabilities: '{4}'",
                         join.Value.JoinNumber,
                         join.Value.JoinSpan,
-                        String.IsNullOrEmpty(join.Value.Metadata.Description) ? join.Value.Metadata.Label: join.Value.Metadata.Description,
+                        String.IsNullOrEmpty(join.Value.AttributeName) ? join.Value.Metadata.Label : join.Value.AttributeName,
                         join.Value.Metadata.JoinType.ToString(),
                         join.Value.Metadata.JoinCapabilities.ToString());
             }
@@ -288,7 +305,7 @@ namespace PepperDash.Essentials.Core
                 }
                 else
                 {
-                    Debug.Console(2, "No mathcing key found in join map for: '{0}'", customJoinData.Key);
+                    Debug.Console(2, "No matching key found in join map for: '{0}'", customJoinData.Key);
                 }
             }
 
@@ -327,7 +344,10 @@ namespace PepperDash.Essentials.Core
         None = 0,
         ToSIMPL = 1,
         FromSIMPL = 2,
-        ToFromSIMPL = ToSIMPL | FromSIMPL
+        ToFromSIMPL = ToSIMPL | FromSIMPL,
+        ToFusion = 4,
+        FromFusion = 8,
+        ToFromFusion = ToFusion | FromFusion,
     }
 
     [Flags]
@@ -340,7 +360,7 @@ namespace PepperDash.Essentials.Core
         DigitalAnalog = Digital | Analog,
         DigitalSerial = Digital | Serial,
         AnalogSerial = Analog | Serial,
-        DigitalAnalogSerial = Digital | Analog | Serial
+        DigitalAnalogSerial = Digital | Analog | Serial,
     }
 
     /// <summary>
@@ -394,7 +414,7 @@ namespace PepperDash.Essentials.Core
     }
 
     /// <summary>
-    /// Data describing the join.  Can be 
+    /// Data describing the join.  Can be overridden from configuratino
     /// </summary>
     public class JoinData
     {
@@ -408,6 +428,11 @@ namespace PepperDash.Essentials.Core
         /// </summary>
         [JsonProperty("joinSpan")]
         public uint JoinSpan { get; set; }
+        /// <summary>
+        /// Fusion Attribute Name (optional)
+        /// </summary>
+        [JsonProperty("attributeName")]
+        public string AttributeName { get; set; }
     }
 
     /// <summary>
@@ -419,6 +444,10 @@ namespace PepperDash.Essentials.Core
 
         private JoinData _data;
         public JoinMetadata Metadata { get; set; }
+        /// <summary>
+        /// To store some future information as you please
+        /// </summary>
+        public object UserObject { get; private set; }
 
         public JoinDataComplete(JoinData data, JoinMetadata metadata)
         {
@@ -449,6 +478,11 @@ namespace PepperDash.Essentials.Core
             get { return _data.JoinSpan; }
         }
 
+        public string AttributeName
+        {
+            get { return _data.AttributeName; }
+        }
+
         public void SetCustomJoinData(JoinData customJoinData)
         {
             _data = customJoinData;

essentials-framework/Essentials Core/PepperDashEssentialsBase/Microphone Privacy/MicrophonePrivacyController.cs

@@ -88,8 +88,12 @@ namespace PepperDash.Essentials.Core.Privacy
             else
                 Debug.Console(0, this, "Unable to add Red LED device");
 
+            DeviceManager.AllDevicesActivated += (o, a) =>
+                {
+                    CheckPrivacyMode();
+                };
+
             AddPostActivationAction(() => {
-                CheckPrivacyMode();
                 PrivacyDevice.PrivacyModeIsOnFeedback.OutputChange -= PrivacyModeIsOnFeedback_OutputChange;
                 PrivacyDevice.PrivacyModeIsOnFeedback.OutputChange += PrivacyModeIsOnFeedback_OutputChange;
             });

essentials-framework/Essentials Core/PepperDashEssentialsBase/PepperDash_Essentials_Core.csproj

@@ -199,6 +199,7 @@
     <Compile Include="Devices\PC\Laptop.cs" />
     <Compile Include="Devices\ReconfigurableDevice.cs" />
     <Compile Include="Devices\VolumeDeviceChangeEventArgs.cs" />
+    <Compile Include="DeviceTypeInterfaces\ITvPresetsProvider.cs" />
     <Compile Include="DeviceTypeInterfaces\LanguageLabel.cs" />
     <Compile Include="DeviceTypeInterfaces\ILanguageProvider.cs" />
     <Compile Include="DeviceTypeInterfaces\IHasBranding.cs" />
@@ -219,6 +220,7 @@
     <Compile Include="Fusion\FusionCustomPropertiesBridge.cs" />
     <Compile Include="Fusion\FusionEventHandlers.cs" />
     <Compile Include="Fusion\FusionProcessorQueries.cs" />
+    <Compile Include="Fusion\EssentialsHuddleSpaceRoomFusionRoomJoinMap.cs" />
     <Compile Include="Fusion\FusionRviDataClasses.cs" />
     <Compile Include="Gateways\CenRfgwController.cs" />
     <Compile Include="Gateways\EssentialsRfGatewayConfig.cs" />
@@ -278,6 +280,7 @@
     <Compile Include="Remotes\Hrxx0WirelessRemoteController.cs" />
     <Compile Include="Room\Behaviours\RoomOnToDefaultSourceWhenOccupied.cs" />
     <Compile Include="Room\EssentialsRoomBase.cs" />
+    <Compile Include="Room\Config\EssentialsRoomScheduledEventsConfig.cs" />
     <Compile Include="Room\Interfaces.cs" />
     <Compile Include="Room\iOccupancyStatusProvider.cs" />
     <Compile Include="Routing\DummyRoutingInputsDevice.cs" />

essentials-framework/Essentials Core/PepperDashEssentialsBase/PepperDash_Essentials_Core.nuspec

@@ -14,7 +14,7 @@
     <tags>crestron 3series 4series</tags>
     <repository type="git" url="https://github.com/PepperDash/Essentials"/>
     <dependencies>
-      <dependency id="PepperDashCore" version="[1.0, 1.1)"/>
+      <dependency id="PepperDashCore" version="[1.0.44, 1.1.0)"/>
     </dependencies>
   </metadata>
   <files>

essentials-framework/Essentials Core/PepperDashEssentialsBase/Plugins/PluginLoader.cs

@@ -402,13 +402,16 @@ namespace PepperDash.Essentials
         /// Loads a
         /// </summary>
         /// <param name="plugin"></param>
+        /// <param name="loadedAssembly"></param>
         static void LoadCustomPlugin(IPluginDeviceFactory plugin, LoadedAssembly loadedAssembly)
         {
             var passed = Global.IsRunningMinimumVersionOrHigher(plugin.MinimumEssentialsFrameworkVersion);
 
             if (!passed)
             {
-                Debug.Console(0, Debug.ErrorLogLevel.Error, "Plugin indicates minimum Essentials version {0}.  Dependency check failed.  Skipping Plugin", plugin.MinimumEssentialsFrameworkVersion);
+                Debug.Console(0, Debug.ErrorLogLevel.Error,
+                    "\r\n********************\r\n\tPlugin indicates minimum Essentials version {0}.  Dependency check failed.  Skipping Plugin {1}\r\n********************",
+                    plugin.MinimumEssentialsFrameworkVersion, loadedAssembly.Name);
                 return;
             }
             else

essentials-framework/Essentials Core/PepperDashEssentialsBase/Presets/DevicePresets.cs

@@ -1,178 +1,300 @@
 using System;
 using System.Collections.Generic;
-using System.Linq;
 using System.Text;
 using Crestron.SimplSharp;
 using Crestron.SimplSharp.CrestronIO;
-
 using Newtonsoft.Json;
-using Newtonsoft.Json.Linq;
-
 using PepperDash.Core;
 
 //using SSMono.IO;
+using PepperDash.Core.WebApi.Presets;
 
 namespace PepperDash.Essentials.Core.Presets
 {
-	/// <summary>
-	/// Class that represents the model behind presets display
-	/// </summary>
-	public class DevicePresetsModel : Device
-	{
-		public event EventHandler PresetsLoaded;
+    /// <summary>
+    /// Class that represents the model behind presets display
+    /// </summary>
+    public class DevicePresetsModel : Device
+    {
+        public delegate void PresetRecalledCallback(ISetTopBoxNumericKeypad device, string channel);
 
-		public int PulseTime { get; set; }
-		public int DigitSpacingMS { get; set; }
-		public bool PresetsAreLoaded { get; private set; }
+        public delegate void PresetsSavedCallback(List<PresetChannel> presets);
 
-		public List<PresetChannel> PresetsList { get { return _PresetsList.ToList(); } }
-		List<PresetChannel> _PresetsList;
-		public int Count { get { return PresetsList != null ? PresetsList.Count : 0; } }
+        private readonly CCriticalSection _fileOps = new CCriticalSection();
+        private readonly bool _initSuccess;
 
-		public bool UseLocalImageStorage { get; set; }
-		public string ImagesLocalHostPrefix { get; set; }
-		public string ImagesPathPrefix { get; set; }
-		public string ListPathPrefix { get; set; }
+        private readonly ISetTopBoxNumericKeypad _setTopBox;
 
-		/// <summary>
-		/// The methods on the STB device to call when dialing
-		/// </summary>
-		Dictionary<char, Action<bool>> DialFunctions;
-		Action<bool> EnterFunction;
+        /// <summary>
+        /// The methods on the STB device to call when dialing
+        /// </summary>
+        private Dictionary<char, Action<bool>> _dialFunctions;
 
-		bool DialIsRunning;
-		string FilePath;
-		bool InitSuccess;
-        //SSMono.IO.FileSystemWatcher ListWatcher;
+        private bool _dialIsRunning;
+        private Action<bool> _enterFunction;
+        private string _filePath;
 
-		public DevicePresetsModel(string key, ISetTopBoxNumericKeypad setTopBox, string fileName)
-			: base(key)
-		{
-			PulseTime = 150;
-			DigitSpacingMS = 150;
+        public DevicePresetsModel(string key, ISetTopBoxNumericKeypad setTopBox, string fileName)
+            : this(key, fileName)
+        {
+            try
+            {
+                _setTopBox = setTopBox;
 
-			try
-			{
-				// Grab the digit functions from the device
-				// If any fail, the whole thing fails peacefully
-				DialFunctions = new Dictionary<char, Action<bool>>(10)
-				{
-					{ '1', setTopBox.Digit1 },
-					{ '2', setTopBox.Digit2 },
-					{ '3', setTopBox.Digit3 },
-					{ '4', setTopBox.Digit4 },
-					{ '5', setTopBox.Digit5 },
-					{ '6', setTopBox.Digit6 },
-					{ '7', setTopBox.Digit7 },
-					{ '8', setTopBox.Digit8 },
-					{ '9', setTopBox.Digit9 },
-					{ '0', setTopBox.Digit0 },
-					{ '-', setTopBox.Dash }
-				};
-			}
-			catch
-			{
-				Debug.Console(0, "DevicePresets '{0}', not attached to INumericKeypad device. Ignoring", key);
-				DialFunctions = null;
-				return;
-			}
+                // Grab the digit functions from the device
+                // If any fail, the whole thing fails peacefully
+                _dialFunctions = new Dictionary<char, Action<bool>>(10)
+                {
+                    {'1', setTopBox.Digit1},
+                    {'2', setTopBox.Digit2},
+                    {'3', setTopBox.Digit3},
+                    {'4', setTopBox.Digit4},
+                    {'5', setTopBox.Digit5},
+                    {'6', setTopBox.Digit6},
+                    {'7', setTopBox.Digit7},
+                    {'8', setTopBox.Digit8},
+                    {'9', setTopBox.Digit9},
+                    {'0', setTopBox.Digit0},
+                    {'-', setTopBox.Dash}
+                };
+            }
+            catch
+            {
+                Debug.Console(0, "DevicePresets '{0}', not attached to INumericKeypad device. Ignoring", key);
+                _dialFunctions = null;
+                return;
+            }
 
-			EnterFunction = setTopBox.KeypadEnter;
+            _enterFunction = setTopBox.KeypadEnter;
+        }
 
-			UseLocalImageStorage = true;
+        public DevicePresetsModel(string key, string fileName) : base(key)
+        {
+            PulseTime = 150;
+            DigitSpacingMs = 150;
 
-			ImagesLocalHostPrefix = "http://" + CrestronEthernetHelper.GetEthernetParameter(
-				CrestronEthernetHelper.ETHERNET_PARAMETER_TO_GET.GET_CURRENT_IP_ADDRESS,0);
-			ImagesPathPrefix = @"/presets/images.zip/";
-			ListPathPrefix = @"/html/presets/lists/";
+            UseLocalImageStorage = true;
 
-			SetFileName(fileName);
+            ImagesLocalHostPrefix = "http://" + CrestronEthernetHelper.GetEthernetParameter(
+                CrestronEthernetHelper.ETHERNET_PARAMETER_TO_GET.GET_CURRENT_IP_ADDRESS, 0);
+            ImagesPathPrefix = @"/presets/images.zip/";
+            ListPathPrefix = @"/html/presets/lists/";
 
-            //ListWatcher = new FileSystemWatcher(@"\HTML\presets\lists");
-            //ListWatcher.NotifyFilter = NotifyFilters.LastWrite;
-            //ListWatcher.EnableRaisingEvents = true;
-            //ListWatcher.Changed += ListWatcher_Changed;
-			InitSuccess = true;
-		}
+            SetFileName(fileName);
+
+            _initSuccess = true;
+        }
+
+        public event PresetRecalledCallback PresetRecalled;
+        public event PresetsSavedCallback PresetsSaved;
+
+        public int PulseTime { get; set; }
+        public int DigitSpacingMs { get; set; }
+        public bool PresetsAreLoaded { get; private set; }
+
+        public List<PresetChannel> PresetsList { get; private set; }
+
+        public int Count
+        {
+            get { return PresetsList != null ? PresetsList.Count : 0; }
+        }
+
+        public bool UseLocalImageStorage { get; set; }
+        public string ImagesLocalHostPrefix { get; set; }
+        public string ImagesPathPrefix { get; set; }
+        public string ListPathPrefix { get; set; }
+        public event EventHandler PresetsLoaded;
 
 
-		public void SetFileName(string path)
-		{
-			FilePath = ListPathPrefix + path;
-			LoadChannels();
-		}	
+        public void SetFileName(string path)
+        {
+            _filePath = ListPathPrefix + path;
 
-		public void LoadChannels()
-		{
-			PresetsAreLoaded = false;
-			try
-			{
-				var pl = JsonConvert.DeserializeObject<PresetsList>(Crestron.SimplSharp.CrestronIO.File.ReadToEnd(FilePath, Encoding.ASCII));
-				Name = pl.Name;
-				_PresetsList = pl.Channels;
-			}
-			catch (Exception e)
-			{
-				Debug.Console(2, this, "LoadChannels: Error reading presets file. These presets will be empty:\r  '{0}'\r  Error:{1}", FilePath, e.Message);
-				// Just save a default empty list
-				_PresetsList = new List<PresetChannel>();
-			}
-			PresetsAreLoaded = true;
+            Debug.Console(2, this, "Setting presets file path to {0}", _filePath);
+            LoadChannels();
+        }
 
-			var handler = PresetsLoaded;
-			if (handler != null)
-				handler(this, EventArgs.Empty);
-		}
+        public void LoadChannels()
+        {
+            try
+            {
+                _fileOps.Enter();
 
-		public void Dial(int presetNum)
-		{
-			if (presetNum <= _PresetsList.Count)
-				Dial(_PresetsList[presetNum - 1].Channel);
-		}
+                Debug.Console(2, this, "Loading presets from {0}", _filePath);
+                PresetsAreLoaded = false;
+                try
+                {
+                    var pl = JsonConvert.DeserializeObject<PresetsList>(File.ReadToEnd(_filePath, Encoding.ASCII));
+                    Name = pl.Name;
+                    PresetsList = pl.Channels;
+                }
+                catch (Exception e)
+                {
+                    Debug.Console(2, this,
+                        "LoadChannels: Error reading presets file. These presets will be empty:\r  '{0}'\r  Error:{1}",
+                        _filePath, e.Message);
+                    // Just save a default empty list
+                    PresetsList = new List<PresetChannel>();
+                }
+                PresetsAreLoaded = true;
 
-		public void Dial(string chanNum)
-		{
-			if (DialIsRunning || !InitSuccess) return;
-			if (DialFunctions == null)
-			{
-				Debug.Console(1, "DevicePresets '{0}', not attached to keypad device. Ignoring channel", Key);
-				return;
-			}
+                var handler = PresetsLoaded;
+                if (handler != null)
+                {
+                    handler(this, EventArgs.Empty);
+                }
+            }
+            finally
+            {
+                _fileOps.Leave();
+            }
+        }
 
-			DialIsRunning = true;
-			CrestronInvoke.BeginInvoke(o =>
-				{
-					foreach (var c in chanNum.ToCharArray())
-					{
-						if (DialFunctions.ContainsKey(c))
-							Pulse(DialFunctions[c]);
-						CrestronEnvironment.Sleep(DigitSpacingMS);
-					}
+        public void Dial(int presetNum)
+        {
+            if (presetNum <= PresetsList.Count)
+            {
+                Dial(PresetsList[presetNum - 1].Channel);
+            }
+        }
 
-					if (EnterFunction != null)
-						Pulse(EnterFunction);
-					DialIsRunning = false;
-				});
-		}
+        public void Dial(string chanNum)
+        {
+            if (_dialIsRunning || !_initSuccess)
+            {
+                return;
+            }
+            if (_dialFunctions == null)
+            {
+                Debug.Console(1, "DevicePresets '{0}', not attached to keypad device. Ignoring channel", Key);
+                return;
+            }
 
-		void Pulse(Action<bool> act)
-		{
-			act(true);
-			CrestronEnvironment.Sleep(PulseTime);
-			act(false);
-		}
+            _dialIsRunning = true;
+            CrestronInvoke.BeginInvoke(o =>
+            {
+                foreach (var c in chanNum.ToCharArray())
+                {
+                    if (_dialFunctions.ContainsKey(c))
+                    {
+                        Pulse(_dialFunctions[c]);
+                    }
+                    CrestronEnvironment.Sleep(DigitSpacingMs);
+                }
 
-		/// <summary>
-		/// Event handler for filesystem watcher.  When directory changes, this is called
-		/// </summary>
-        //void ListWatcher_Changed(object sender, FileSystemEventArgs e)
-        //{
-        //    Debug.Console(1, this, "folder modified: {0}", e.FullPath);
-        //    if (e.FullPath.Equals(FilePath, StringComparison.OrdinalIgnoreCase))
-        //    {
-        //        Debug.Console(1, this, "File changed: {0}", e.ChangeType);			
-        //        LoadChannels();
-        //    }
-        //}
-	}
+                if (_enterFunction != null)
+                {
+                    Pulse(_enterFunction);
+                }
+                _dialIsRunning = false;
+            });
+
+            if (_setTopBox == null) return;
+
+            OnPresetRecalled(_setTopBox, chanNum);
+        }
+
+        public void Dial(int presetNum, ISetTopBoxNumericKeypad setTopBox)
+        {
+            if (presetNum <= PresetsList.Count)
+            {
+                Dial(PresetsList[presetNum - 1].Channel, setTopBox);
+            }
+        }
+
+        public void Dial(string chanNum, ISetTopBoxNumericKeypad setTopBox)
+        {
+            _dialFunctions = new Dictionary<char, Action<bool>>(10)
+            {
+                {'1', setTopBox.Digit1},
+                {'2', setTopBox.Digit2},
+                {'3', setTopBox.Digit3},
+                {'4', setTopBox.Digit4},
+                {'5', setTopBox.Digit5},
+                {'6', setTopBox.Digit6},
+                {'7', setTopBox.Digit7},
+                {'8', setTopBox.Digit8},
+                {'9', setTopBox.Digit9},
+                {'0', setTopBox.Digit0},
+                {'-', setTopBox.Dash}
+            };
+
+            _enterFunction = setTopBox.KeypadEnter;
+
+            OnPresetRecalled(setTopBox, chanNum);
+
+            Dial(chanNum);
+        }
+
+        private void OnPresetRecalled(ISetTopBoxNumericKeypad setTopBox, string channel)
+        {
+            var handler = PresetRecalled;
+
+            if (handler == null)
+            {
+                return;
+            }
+
+            handler(setTopBox, channel);
+        }
+
+        public void UpdatePreset(int index, PresetChannel preset)
+        {
+            if (index >= PresetsList.Count)
+            {
+                return;
+            }
+
+            PresetsList[index] = preset;
+
+            SavePresets();
+
+            OnPresetsSaved();
+        }
+
+        public void UpdatePresets(List<PresetChannel> presets)
+        {
+            PresetsList = presets;
+
+            SavePresets();
+
+            OnPresetsSaved();
+        }
+
+        private void SavePresets()
+        {
+            try
+            {
+                _fileOps.Enter();
+                var pl = new PresetsList {Channels = PresetsList, Name = Name};
+                var json = JsonConvert.SerializeObject(pl, Formatting.Indented);
+
+                using (var file = File.Open(_filePath, FileMode.Truncate))
+                {
+                    file.Write(json, Encoding.UTF8);
+                }
+            }
+            finally
+            {
+                _fileOps.Leave();
+            }
+            
+        }
+
+        private void OnPresetsSaved()
+        {
+            var handler = PresetsSaved;
+
+            if (handler == null) return;
+
+            handler(PresetsList);
+        }
+
+        private void Pulse(Action<bool> act)
+        {
+            act(true);
+            CrestronEnvironment.Sleep(PulseTime);
+            act(false);
+        }
+    }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Presets/PresetChannel.cs

@@ -10,19 +10,22 @@ namespace PepperDash.Essentials.Core.Presets
 	public class PresetChannel
 	{
 
-		[JsonProperty(Required = Required.Always)]
+		[JsonProperty(Required = Required.Always,PropertyName = "name")]
 		public string Name { get; set; }
-		[JsonProperty(Required = Required.Always)]
+
+		[JsonProperty(Required = Required.Always, PropertyName = "iconUrl")]
 		public string IconUrl { get; set; }
-		[JsonProperty(Required = Required.Always)]
+
+		[JsonProperty(Required = Required.Always, PropertyName = "channel")]
 		public string Channel { get; set; }
 	}
 
 	public class PresetsList
 	{
-		[JsonProperty(Required=Required.Always)]
+		[JsonProperty(Required=Required.Always,PropertyName = "name")]
 		public string Name { get; set; }
-		[JsonProperty(Required = Required.Always)]
+
+		[JsonProperty(Required = Required.Always, PropertyName = "channels")]
 		public List<PresetChannel> Channels { get; set; }
 	}
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Room/Config/EssentialsRoomScheduledEventsConfig.cs

@@ -0,0 +1,41 @@
+using System.Collections.Generic;
+using Crestron.SimplSharp.Scheduler;
+using Newtonsoft.Json;
+using Newtonsoft.Json.Converters;
+using PepperDash.Essentials.Core;
+
+namespace PepperDash.Essentials.Room.Config
+{
+    public class EssentialsRoomScheduledEventsConfig
+    {
+        [JsonProperty("scheduledEvents")]
+        public List<ScheduledEventConfig> ScheduledEvents;
+    }
+
+    public class ScheduledEventConfig
+    {
+        [JsonProperty("key")]
+        public string Key;
+
+        [JsonProperty("name")]
+        public string Name;
+
+        [JsonProperty("days")]
+        public ScheduledEventCommon.eWeekDays Days;
+
+        [JsonProperty("time")]
+        public string Time;
+
+        [JsonProperty("actions")]
+        public List<DeviceActionWrapper> Actions;
+
+        [JsonProperty("persistent")]
+        public bool Persistent;
+
+        [JsonProperty("acknowledgeable")]
+        public bool Acknowledgeable;
+
+        [JsonProperty("enable")]
+        public bool Enable;
+    }
+}

essentials-framework/Essentials Core/PepperDashEssentialsBase/Room/EssentialsRoomBase.cs

@@ -1,58 +1,58 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using Crestron.SimplSharp;
-using Crestron.SimplSharp.Scheduler;
-
-using PepperDash.Core;
-using PepperDash.Essentials.Core;
-using PepperDash.Essentials.Core.Config;
-using PepperDash.Essentials.Core.Devices;
-using PepperDash.Essentials.Core.DeviceTypeInterfaces;
-
-namespace PepperDash.Essentials.Core
-{
-    /// <summary>
-    /// 
-    /// </summary>
-    public abstract class EssentialsRoomBase : ReconfigurableDevice
-    {
-        /// <summary>
-        ///
-        /// </summary>
-        public BoolFeedback OnFeedback { get; private set; }
-
-        /// <summary>
-        /// Fires when the RoomOccupancy object is set
-        /// </summary>
-        public event EventHandler<EventArgs> RoomOccupancyIsSet;
-
-        public BoolFeedback IsWarmingUpFeedback { get; private set; }
-        public BoolFeedback IsCoolingDownFeedback { get; private set; }
-
-        public IOccupancyStatusProvider RoomOccupancy { get; private set; }
-
-        public bool OccupancyStatusProviderIsRemote { get; private set; }
-
-        protected abstract Func<bool> IsWarmingFeedbackFunc { get; }
-        protected abstract Func<bool> IsCoolingFeedbackFunc { get; }
-
-        /// <summary>
-        /// Indicates if this room is Mobile Control Enabled
-        /// </summary>
-        public bool IsMobileControlEnabled { get; private set; }
-
-        /// <summary>
-        /// The bridge for this room if Mobile Control is enabled
-        /// </summary>
-        public IMobileControlRoomBridge MobileControlRoomBridge { get; private set; }
-
-        /// <summary>
-        /// The config name of the source list
-        /// </summary>
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+using Crestron.SimplSharp.Scheduler;
+
+using PepperDash.Core;
+using PepperDash.Essentials.Core;
+using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Devices;
+using PepperDash.Essentials.Core.DeviceTypeInterfaces;
+
+namespace PepperDash.Essentials.Core
+{
+    /// <summary>
+    /// 
+    /// </summary>
+    public abstract class EssentialsRoomBase : ReconfigurableDevice
+    {
+        /// <summary>
+        ///
+        /// </summary>
+        public BoolFeedback OnFeedback { get; private set; }
+
+        /// <summary>
+        /// Fires when the RoomOccupancy object is set
+        /// </summary>
+        public event EventHandler<EventArgs> RoomOccupancyIsSet;
+
+        public BoolFeedback IsWarmingUpFeedback { get; private set; }
+        public BoolFeedback IsCoolingDownFeedback { get; private set; }
+
+        public IOccupancyStatusProvider RoomOccupancy { get; private set; }
+
+        public bool OccupancyStatusProviderIsRemote { get; private set; }
+
+        protected abstract Func<bool> IsWarmingFeedbackFunc { get; }
+        protected abstract Func<bool> IsCoolingFeedbackFunc { get; }
+
+        /// <summary>
+        /// Indicates if this room is Mobile Control Enabled
+        /// </summary>
+        public bool IsMobileControlEnabled { get; private set; }
+
+        /// <summary>
+        /// The bridge for this room if Mobile Control is enabled
+        /// </summary>
+        public IMobileControlRoomBridge MobileControlRoomBridge { get; private set; }
+
+        /// <summary>
+        /// The config name of the source list
+        /// </summary>
 		/// 
-		protected string _SourceListKey;
+		protected string _SourceListKey;
         public virtual string SourceListKey {
 			get
 			{
@@ -63,306 +63,306 @@ namespace PepperDash.Essentials.Core
 				_SourceListKey = value; 
 
 			}
-		}
-
-        /// <summary>
-        /// Timer used for informing the UIs of a shutdown
-        /// </summary>        
-        public SecondsCountdownTimer ShutdownPromptTimer { get; private set; }
-
-        /// <summary>
-        /// 
-        /// </summary>
-        public int ShutdownPromptSeconds { get; set; }
-        public int ShutdownVacancySeconds { get; set; }
-        public eShutdownType ShutdownType { get; private set; }
-
-        public EssentialsRoomEmergencyBase Emergency { get; set; }
-
-        public Core.Privacy.MicrophonePrivacyController MicrophonePrivacy { get; set; }
-
-        public string LogoUrlLightBkgnd { get; set; }
-
-        public string LogoUrlDarkBkgnd { get; set; }
-
-        protected SecondsCountdownTimer RoomVacancyShutdownTimer { get; private set; }
-
-        public eVacancyMode VacancyMode { get; private set; }
-
-        /// <summary>
-        /// Seconds after vacancy prompt is displayed until shutdown
-        /// </summary>
-        protected int RoomVacancyShutdownSeconds;
-
-        /// <summary>
-        /// Seconds after vacancy detected until prompt is displayed
-        /// </summary>
-        protected int RoomVacancyShutdownPromptSeconds;
-
-        /// <summary>
-        /// 
-        /// </summary>
-        protected abstract Func<bool> OnFeedbackFunc { get; }
-
-		protected Dictionary<IBasicVolumeWithFeedback, uint> SavedVolumeLevels = new Dictionary<IBasicVolumeWithFeedback, uint>();
-
-		/// <summary>
-		/// When volume control devices change, should we zero the one that we are leaving?
-		/// </summary>
-		public bool ZeroVolumeWhenSwtichingVolumeDevices { get; private set; }
-
-
-        public EssentialsRoomBase(DeviceConfig config)
-            : base(config)
-        {
-            // Setup the ShutdownPromptTimer
-            ShutdownPromptTimer = new SecondsCountdownTimer(Key + "-offTimer");
-            ShutdownPromptTimer.IsRunningFeedback.OutputChange += (o, a) =>
-            {
-                if (!ShutdownPromptTimer.IsRunningFeedback.BoolValue)
-                    ShutdownType = eShutdownType.None;
-            };
-            ShutdownPromptTimer.HasFinished += (o, a) => Shutdown(); // Shutdown is triggered 
-
-            ShutdownPromptSeconds = 60;
-            ShutdownVacancySeconds = 120; 
-            
-            ShutdownType = eShutdownType.None;
-
-            RoomVacancyShutdownTimer = new SecondsCountdownTimer(Key + "-vacancyOffTimer");
-            //RoomVacancyShutdownTimer.IsRunningFeedback.OutputChange += (o, a) =>
-            //{
-            //    if (!RoomVacancyShutdownTimer.IsRunningFeedback.BoolValue)
-            //        ShutdownType = ShutdownType.Vacancy;
-            //};
-            RoomVacancyShutdownTimer.HasFinished += new EventHandler<EventArgs>(RoomVacancyShutdownPromptTimer_HasFinished); // Shutdown is triggered
-
-            RoomVacancyShutdownPromptSeconds = 1500;    //  25 min to prompt warning
-            RoomVacancyShutdownSeconds = 240;           //  4 min after prompt will trigger shutdown prompt
-            VacancyMode = eVacancyMode.None;
-
-            OnFeedback = new BoolFeedback(OnFeedbackFunc);
-
-            IsWarmingUpFeedback = new BoolFeedback(IsWarmingFeedbackFunc);
-            IsCoolingDownFeedback = new BoolFeedback(IsCoolingFeedbackFunc);
-
-            AddPostActivationAction(() =>
-            {
-                if (RoomOccupancy != null)
-                    OnRoomOccupancyIsSet();
-            });
-        }
-
-        public override bool CustomActivate()
-        {
-            SetUpMobileControl();
-
-            return base.CustomActivate();
-        }
-
-        /// <summary>
-        /// If mobile control is enabled, sets the appropriate properties
-        /// </summary>
-        void SetUpMobileControl()
-        {
-            var mcBridgeKey = string.Format("mobileControlBridge-{0}", Key);
-            var mcBridge = DeviceManager.GetDeviceForKey(mcBridgeKey);
-            if (mcBridge == null)
-            {
-                Debug.Console(1, this, "*********************Mobile Control Bridge Not found for this room.");
-                IsMobileControlEnabled = false;
-                return;
-            }
-            else
-            {
-                MobileControlRoomBridge = mcBridge as IMobileControlRoomBridge;
-                Debug.Console(1, this, "*********************Mobile Control Bridge found and enabled for this room");
-                IsMobileControlEnabled = true;
-            }
-        }
-
-        void RoomVacancyShutdownPromptTimer_HasFinished(object sender, EventArgs e)
-        {
-            switch (VacancyMode)
-            {
-                case eVacancyMode.None:
-                    StartRoomVacancyTimer(eVacancyMode.InInitialVacancy);
-                    break;
-                case eVacancyMode.InInitialVacancy:
-                    StartRoomVacancyTimer(eVacancyMode.InShutdownWarning);
-                    break;
-                case eVacancyMode.InShutdownWarning:
-                    {
-                        StartShutdown(eShutdownType.Vacancy);
-                        Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Shutting Down due to vacancy.");
-                        break;
-                    }
-                default:
-                    break;
-            }
-        }
-
-        /// <summary>
-        /// 
-        /// </summary>
-        /// <param name="type"></param>
-        public void StartShutdown(eShutdownType type)
-        {
-            // Check for shutdowns running. Manual should override other shutdowns
-
-            if (type == eShutdownType.Manual)
-                ShutdownPromptTimer.SecondsToCount = ShutdownPromptSeconds;
-            else if (type == eShutdownType.Vacancy)
-                ShutdownPromptTimer.SecondsToCount = ShutdownVacancySeconds;
-            ShutdownType = type;
-            ShutdownPromptTimer.Start();
-
-            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "ShutdownPromptTimer Started. Type: {0}.  Seconds: {1}", ShutdownType, ShutdownPromptTimer.SecondsToCount);
-        }
-
-        public void StartRoomVacancyTimer(eVacancyMode mode)
-        {
-            if (mode == eVacancyMode.None)
-                RoomVacancyShutdownTimer.SecondsToCount = RoomVacancyShutdownPromptSeconds;
-            else if (mode == eVacancyMode.InInitialVacancy)
-                RoomVacancyShutdownTimer.SecondsToCount = RoomVacancyShutdownSeconds;
-            else if (mode == eVacancyMode.InShutdownWarning)
-                RoomVacancyShutdownTimer.SecondsToCount = 60;
-            VacancyMode = mode;
-            RoomVacancyShutdownTimer.Start();
-
-            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Vacancy Timer Started. Mode: {0}.  Seconds: {1}", VacancyMode, RoomVacancyShutdownTimer.SecondsToCount);
-        }
-
-        /// <summary>
-        /// Resets the vacancy mode and shutsdwon the room
-        /// </summary>
-        public void Shutdown()
-        {
-            VacancyMode = eVacancyMode.None;
-            EndShutdown();
-        }
-
-        /// <summary>
-        /// This method is for the derived class to define it's specific shutdown
-        /// requirements but should not be called directly.  It is called by Shutdown()
-        /// </summary>
-        protected abstract void EndShutdown();
-
-
-        /// <summary>
-        /// Override this to implement a default volume level(s) method
-        /// </summary>
-        public abstract void SetDefaultLevels();
-
-        /// <summary>
-        /// Sets the object to be used as the IOccupancyStatusProvider for the room. Can be an Occupancy Aggregator or a specific device
-        /// </summary>
-        /// <param name="statusProvider"></param>
-        public void SetRoomOccupancy(IOccupancyStatusProvider statusProvider, int timeoutMinutes)
-        { 
-			if (statusProvider == null)
-			{
-				Debug.Console(0, this, "ERROR: Occupancy sensor device is null");
-				return;
-			}
-
-            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Room Occupancy set to device: '{0}'", (statusProvider as Device).Key);
-            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Timeout Minutes from Config is: {0}", timeoutMinutes);
-
-            // If status provider is fusion, set flag to remote
-            if (statusProvider is Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase)
-                OccupancyStatusProviderIsRemote = true;
-
-            if(timeoutMinutes > 0)
-                RoomVacancyShutdownSeconds = timeoutMinutes * 60;
-
-            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "RoomVacancyShutdownSeconds set to {0}", RoomVacancyShutdownSeconds);
-
-            RoomOccupancy = statusProvider;
-
-            RoomOccupancy.RoomIsOccupiedFeedback.OutputChange -= RoomIsOccupiedFeedback_OutputChange;
-            RoomOccupancy.RoomIsOccupiedFeedback.OutputChange += RoomIsOccupiedFeedback_OutputChange;
-
-            OnRoomOccupancyIsSet();
-        }
-
-        void OnRoomOccupancyIsSet()
-        {
-            var handler = RoomOccupancyIsSet;
-            if (handler != null)
-                handler(this, new EventArgs());
-        }
-
-        /// <summary>
-        /// To allow base class to power room on to last source
-        /// </summary>
-        public abstract void PowerOnToDefaultOrLastSource();
-
-        /// <summary>
-        /// To allow base class to power room on to default source
-        /// </summary>
-        /// <returns></returns>
-        public abstract bool RunDefaultPresentRoute();
-
-        void RoomIsOccupiedFeedback_OutputChange(object sender, EventArgs e)
-        {
-            if (RoomOccupancy.RoomIsOccupiedFeedback.BoolValue == false)
-            {
-                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "Notice: Vacancy Detected");
-                // Trigger the timer when the room is vacant
-                StartRoomVacancyTimer(eVacancyMode.InInitialVacancy);
-            }
-            else
-            {
-                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "Notice: Occupancy Detected");
-                // Reset the timer when the room is occupied
-                RoomVacancyShutdownTimer.Cancel();
-            }
-        }
-
-        /// <summary>
-        /// Executes when RoomVacancyShutdownTimer expires.  Used to trigger specific room actions as needed.  Must nullify the timer object when executed
-        /// </summary>
-        /// <param name="o"></param>
-        public abstract void RoomVacatedForTimeoutPeriod(object o);
-    }
-        
-    /// <summary>
-    /// To describe the various ways a room may be shutting down
-    /// </summary>
-    public enum eShutdownType
-    {
-        None = 0,
-        External,
-        Manual,
-        Vacancy
-    }
-
-    public enum eVacancyMode
-    {
-        None = 0,
-        InInitialVacancy,
-        InShutdownWarning
-    }
-
-    /// <summary>
-    /// 
-    /// </summary>
-    public enum eWarmingCoolingMode
-    {
-        None,
-        Warming,
-        Cooling
-    }
-
-    public abstract class EssentialsRoomEmergencyBase : IKeyed
-    {
-        public string Key { get; private set; }
-
-        public EssentialsRoomEmergencyBase(string key)
-        {
-            Key = key;
-        }
-    }
+		}
+
+        /// <summary>
+        /// Timer used for informing the UIs of a shutdown
+        /// </summary>        
+        public SecondsCountdownTimer ShutdownPromptTimer { get; private set; }
+
+        /// <summary>
+        /// 
+        /// </summary>
+        public int ShutdownPromptSeconds { get; set; }
+        public int ShutdownVacancySeconds { get; set; }
+        public eShutdownType ShutdownType { get; private set; }
+
+        public EssentialsRoomEmergencyBase Emergency { get; set; }
+
+        public Core.Privacy.MicrophonePrivacyController MicrophonePrivacy { get; set; }
+
+        public string LogoUrlLightBkgnd { get; set; }
+
+        public string LogoUrlDarkBkgnd { get; set; }
+
+        protected SecondsCountdownTimer RoomVacancyShutdownTimer { get; private set; }
+
+        public eVacancyMode VacancyMode { get; private set; }
+
+        /// <summary>
+        /// Seconds after vacancy prompt is displayed until shutdown
+        /// </summary>
+        protected int RoomVacancyShutdownSeconds;
+
+        /// <summary>
+        /// Seconds after vacancy detected until prompt is displayed
+        /// </summary>
+        protected int RoomVacancyShutdownPromptSeconds;
+
+        /// <summary>
+        /// 
+        /// </summary>
+        protected abstract Func<bool> OnFeedbackFunc { get; }
+
+		protected Dictionary<IBasicVolumeWithFeedback, uint> SavedVolumeLevels = new Dictionary<IBasicVolumeWithFeedback, uint>();
+
+		/// <summary>
+		/// When volume control devices change, should we zero the one that we are leaving?
+		/// </summary>
+		public bool ZeroVolumeWhenSwtichingVolumeDevices { get; private set; }
+
+
+        public EssentialsRoomBase(DeviceConfig config)
+            : base(config)
+        {
+            // Setup the ShutdownPromptTimer
+            ShutdownPromptTimer = new SecondsCountdownTimer(Key + "-offTimer");
+            ShutdownPromptTimer.IsRunningFeedback.OutputChange += (o, a) =>
+            {
+                if (!ShutdownPromptTimer.IsRunningFeedback.BoolValue)
+                    ShutdownType = eShutdownType.None;
+            };
+            ShutdownPromptTimer.HasFinished += (o, a) => Shutdown(); // Shutdown is triggered 
+
+            ShutdownPromptSeconds = 60;
+            ShutdownVacancySeconds = 120; 
+            
+            ShutdownType = eShutdownType.None;
+
+            RoomVacancyShutdownTimer = new SecondsCountdownTimer(Key + "-vacancyOffTimer");
+            //RoomVacancyShutdownTimer.IsRunningFeedback.OutputChange += (o, a) =>
+            //{
+            //    if (!RoomVacancyShutdownTimer.IsRunningFeedback.BoolValue)
+            //        ShutdownType = ShutdownType.Vacancy;
+            //};
+            RoomVacancyShutdownTimer.HasFinished += new EventHandler<EventArgs>(RoomVacancyShutdownPromptTimer_HasFinished); // Shutdown is triggered
+
+            RoomVacancyShutdownPromptSeconds = 1500;    //  25 min to prompt warning
+            RoomVacancyShutdownSeconds = 240;           //  4 min after prompt will trigger shutdown prompt
+            VacancyMode = eVacancyMode.None;
+
+            OnFeedback = new BoolFeedback(OnFeedbackFunc);
+
+            IsWarmingUpFeedback = new BoolFeedback(IsWarmingFeedbackFunc);
+            IsCoolingDownFeedback = new BoolFeedback(IsCoolingFeedbackFunc);
+
+            AddPostActivationAction(() =>
+            {
+                if (RoomOccupancy != null)
+                    OnRoomOccupancyIsSet();
+            });
+        }
+
+        public override bool CustomActivate()
+        {
+            SetUpMobileControl();
+
+            return base.CustomActivate();
+        }
+
+        /// <summary>
+        /// If mobile control is enabled, sets the appropriate properties
+        /// </summary>
+        void SetUpMobileControl()
+        {
+            var mcBridgeKey = string.Format("mobileControlBridge-{0}", Key);
+            var mcBridge = DeviceManager.GetDeviceForKey(mcBridgeKey);
+            if (mcBridge == null)
+            {
+                Debug.Console(1, this, "*********************Mobile Control Bridge Not found for this room.");
+                IsMobileControlEnabled = false;
+                return;
+            }
+            else
+            {
+                MobileControlRoomBridge = mcBridge as IMobileControlRoomBridge;
+                Debug.Console(1, this, "*********************Mobile Control Bridge found and enabled for this room");
+                IsMobileControlEnabled = true;
+            }
+        }
+
+        void RoomVacancyShutdownPromptTimer_HasFinished(object sender, EventArgs e)
+        {
+            switch (VacancyMode)
+            {
+                case eVacancyMode.None:
+                    StartRoomVacancyTimer(eVacancyMode.InInitialVacancy);
+                    break;
+                case eVacancyMode.InInitialVacancy:
+                    StartRoomVacancyTimer(eVacancyMode.InShutdownWarning);
+                    break;
+                case eVacancyMode.InShutdownWarning:
+                    {
+                        StartShutdown(eShutdownType.Vacancy);
+                        Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Shutting Down due to vacancy.");
+                        break;
+                    }
+                default:
+                    break;
+            }
+        }
+
+        /// <summary>
+        /// 
+        /// </summary>
+        /// <param name="type"></param>
+        public void StartShutdown(eShutdownType type)
+        {
+            // Check for shutdowns running. Manual should override other shutdowns
+
+            if (type == eShutdownType.Manual)
+                ShutdownPromptTimer.SecondsToCount = ShutdownPromptSeconds;
+            else if (type == eShutdownType.Vacancy)
+                ShutdownPromptTimer.SecondsToCount = ShutdownVacancySeconds;
+            ShutdownType = type;
+            ShutdownPromptTimer.Start();
+
+            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "ShutdownPromptTimer Started. Type: {0}.  Seconds: {1}", ShutdownType, ShutdownPromptTimer.SecondsToCount);
+        }
+
+        public void StartRoomVacancyTimer(eVacancyMode mode)
+        {
+            if (mode == eVacancyMode.None)
+                RoomVacancyShutdownTimer.SecondsToCount = RoomVacancyShutdownPromptSeconds;
+            else if (mode == eVacancyMode.InInitialVacancy)
+                RoomVacancyShutdownTimer.SecondsToCount = RoomVacancyShutdownSeconds;
+            else if (mode == eVacancyMode.InShutdownWarning)
+                RoomVacancyShutdownTimer.SecondsToCount = 60;
+            VacancyMode = mode;
+            RoomVacancyShutdownTimer.Start();
+
+            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Vacancy Timer Started. Mode: {0}.  Seconds: {1}", VacancyMode, RoomVacancyShutdownTimer.SecondsToCount);
+        }
+
+        /// <summary>
+        /// Resets the vacancy mode and shutsdwon the room
+        /// </summary>
+        public void Shutdown()
+        {
+            VacancyMode = eVacancyMode.None;
+            EndShutdown();
+        }
+
+        /// <summary>
+        /// This method is for the derived class to define it's specific shutdown
+        /// requirements but should not be called directly.  It is called by Shutdown()
+        /// </summary>
+        protected abstract void EndShutdown();
+
+
+        /// <summary>
+        /// Override this to implement a default volume level(s) method
+        /// </summary>
+        public abstract void SetDefaultLevels();
+
+        /// <summary>
+        /// Sets the object to be used as the IOccupancyStatusProvider for the room. Can be an Occupancy Aggregator or a specific device
+        /// </summary>
+        /// <param name="statusProvider"></param>
+        public void SetRoomOccupancy(IOccupancyStatusProvider statusProvider, int timeoutMinutes)
+        { 
+			if (statusProvider == null)
+			{
+				Debug.Console(0, this, "ERROR: Occupancy sensor device is null");
+				return;
+			}
+
+            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Room Occupancy set to device: '{0}'", (statusProvider as Device).Key);
+            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "Timeout Minutes from Config is: {0}", timeoutMinutes);
+
+            // If status provider is fusion, set flag to remote
+            if (statusProvider is Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase)
+                OccupancyStatusProviderIsRemote = true;
+
+            if(timeoutMinutes > 0)
+                RoomVacancyShutdownSeconds = timeoutMinutes * 60;
+
+            Debug.Console(0, this, Debug.ErrorLogLevel.Notice, "RoomVacancyShutdownSeconds set to {0}", RoomVacancyShutdownSeconds);
+
+            RoomOccupancy = statusProvider;
+
+            RoomOccupancy.RoomIsOccupiedFeedback.OutputChange -= RoomIsOccupiedFeedback_OutputChange;
+            RoomOccupancy.RoomIsOccupiedFeedback.OutputChange += RoomIsOccupiedFeedback_OutputChange;
+
+            OnRoomOccupancyIsSet();
+        }
+
+        void OnRoomOccupancyIsSet()
+        {
+            var handler = RoomOccupancyIsSet;
+            if (handler != null)
+                handler(this, new EventArgs());
+        }
+
+        /// <summary>
+        /// To allow base class to power room on to last source
+        /// </summary>
+        public abstract void PowerOnToDefaultOrLastSource();
+
+        /// <summary>
+        /// To allow base class to power room on to default source
+        /// </summary>
+        /// <returns></returns>
+        public abstract bool RunDefaultPresentRoute();
+
+        void RoomIsOccupiedFeedback_OutputChange(object sender, EventArgs e)
+        {
+            if (RoomOccupancy.RoomIsOccupiedFeedback.BoolValue == false)
+            {
+                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "Notice: Vacancy Detected");
+                // Trigger the timer when the room is vacant
+                StartRoomVacancyTimer(eVacancyMode.InInitialVacancy);
+            }
+            else
+            {
+                Debug.Console(1, this, Debug.ErrorLogLevel.Notice, "Notice: Occupancy Detected");
+                // Reset the timer when the room is occupied
+                RoomVacancyShutdownTimer.Cancel();
+            }
+        }
+
+        /// <summary>
+        /// Executes when RoomVacancyShutdownTimer expires.  Used to trigger specific room actions as needed.  Must nullify the timer object when executed
+        /// </summary>
+        /// <param name="o"></param>
+        public abstract void RoomVacatedForTimeoutPeriod(object o);
+    }
+        
+    /// <summary>
+    /// To describe the various ways a room may be shutting down
+    /// </summary>
+    public enum eShutdownType
+    {
+        None = 0,
+        External,
+        Manual,
+        Vacancy
+    }
+
+    public enum eVacancyMode
+    {
+        None = 0,
+        InInitialVacancy,
+        InShutdownWarning
+    }
+
+    /// <summary>
+    /// 
+    /// </summary>
+    public enum eWarmingCoolingMode
+    {
+        None,
+        Warming,
+        Cooling
+    }
+
+    public abstract class EssentialsRoomEmergencyBase : IKeyed
+    {
+        public string Key { get; private set; }
+
+        public EssentialsRoomEmergencyBase(string key)
+        {
+            Key = key;
+        }
+    }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Room/Interfaces.cs

@@ -41,6 +41,14 @@ namespace PepperDash.Essentials.Core
 
     }
 
+    /// <summary>
+    /// Simplified routing direct from source to destination
+    /// </summary>
+    public interface IRunDirectRouteAction
+    {
+        void RunDirectRoute(string sourceKey, string destinationKey);
+    }
+
     /// <summary>
     /// For rooms that default presentation only routing
     /// </summary>

essentials-framework/Essentials Core/PepperDashEssentialsBase/Routing/RoutingInterfaces.cs

@@ -59,7 +59,7 @@ namespace PepperDash.Essentials.Core
 	/// <summary>
 	/// For fixed-source endpoint devices
 	/// </summary>
-    [Obsolete]
+    [Obsolete("Please switch to IRoutingSink")]
     public interface IRoutingSinkNoSwitching : IRoutingSink
 	{
 

essentials-framework/Essentials DM/Essentials_DM/Chassis/DmChassisController.cs

@@ -49,7 +49,9 @@ namespace PepperDash.Essentials.DM
         public BoolFeedback EnableAudioBreakawayFeedback { get; private set; }
         public BoolFeedback EnableUsbBreakawayFeedback { get; private set; }
 
-        public Dictionary<uint, IntFeedback> InputCardHdcpStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> InputCardHdcpStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> InputStreamCardStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> OutputStreamCardStateFeedbacks { get; private set; }
 
         public Dictionary<uint, eHdcpCapabilityType> InputCardHdcpCapabilityTypes { get; private set; }
 
@@ -223,7 +225,9 @@ namespace PepperDash.Essentials.DM
             EnableUsbBreakawayFeedback =
                 new BoolFeedback(() => (Chassis as DmMDMnxn).EnableUSBBreakawayFeedback.BoolValue);
 
-            InputCardHdcpStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            InputCardHdcpStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            InputStreamCardStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            OutputStreamCardStateFeedbacks = new Dictionary<uint, IntFeedback>();
             InputCardHdcpCapabilityTypes = new Dictionary<uint, eHdcpCapabilityType>();
 
             for (uint x = 1; x <= Chassis.NumberOfOutputs; x++)
@@ -307,6 +311,33 @@ namespace PepperDash.Essentials.DM
                         //     return hdMdNxMHdmiOutput.HdmiOutputPort.DisabledByHdcpFeedback.BoolValue;
 
                         return false;
+                    });
+                    OutputStreamCardStateFeedbacks[tempX] = new IntFeedback(() =>
+                    {
+                        try
+                        {
+                            var outputCard = Chassis.Outputs[tempX];
+
+                            if (outputCard.Card is DmcStroAV)
+                            {
+                                Debug.Console(2, "Found output stream card in slot: {0}.", tempX);
+                                var streamCard = outputCard.Card as DmcStroAV;
+                                if (streamCard.Control.StartFeedback.BoolValue == true)
+                                    return 1;
+                                else if (streamCard.Control.StopFeedback.BoolValue == true)
+                                    return 2;
+                                else if (streamCard.Control.PauseFeedback.BoolValue == true)
+                                    return 3;
+                                else
+                                    return 0;
+                            }
+                            return 0;
+                        }
+                        catch (InvalidOperationException iopex)
+                        {
+                            Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "Error adding output stream card in slot: {0}. Error: {1}", tempX, iopex);
+                            return 0;
+                        }
                     });
                 }
 
@@ -406,6 +437,33 @@ namespace PepperDash.Essentials.DM
                             Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "The Input Card in slot: {0} supports HDCP 2.  Please update the configuration value in the inputCardSupportsHdcp2 object to true. Error: {1}", tempX, iopex);
                             return 0;
                         }   
+                    });
+                    InputStreamCardStateFeedbacks[tempX] = new IntFeedback(() =>
+                    {
+                        try
+                        {
+                            var inputCard = Chassis.Inputs[tempX];
+
+                            if (inputCard.Card is DmcStr)
+                            {
+                                Debug.Console(2, "Found input stream card in slot: {0}.", tempX);
+                                var streamCard = inputCard.Card as DmcStr;
+                                if (streamCard.Control.StartFeedback.BoolValue == true)
+                                    return 1;
+                                else if (streamCard.Control.StopFeedback.BoolValue == true)
+                                    return 2;
+                                else if (streamCard.Control.PauseFeedback.BoolValue == true)
+                                    return 3;
+                                else
+                                    return 0;
+                            }
+                            return 0;
+                        }
+                        catch (InvalidOperationException iopex)
+                        {
+                            Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "Error adding input stream card in slot: {0}. Error: {1}", tempX, iopex);
+                            return 0;
+                        }
                     });
                 }
             }
@@ -915,6 +973,19 @@ namespace PepperDash.Essentials.DM
                             else
                                 Debug.Console(1, this, "No index of {0} found in InputCardHdcpCapabilityFeedbacks");
                             break;
+                        }
+                    case DMInputEventIds.StartEventId:
+                    case DMInputEventIds.StopEventId:
+                    case DMInputEventIds.PauseEventId:
+                        {
+                            Debug.Console(2, this, "DM Input {0} Stream Status EventId", args.Number);
+                            if (InputStreamCardStateFeedbacks[args.Number] != null)
+                            {
+                                InputStreamCardStateFeedbacks[args.Number].FireUpdate();
+                            }
+                            else
+                                Debug.Console(2, this, "No index of {0} found in InputStreamCardStateFeedbacks");
+                            break;
                         }
                     default:
                         {
@@ -1043,6 +1114,19 @@ namespace PepperDash.Essentials.DM
                     Debug.Console(2, this, "DM Output {0} DisabledByHdcpEventId", args.Number);
                     OutputDisabledByHdcpFeedbacks[args.Number].FireUpdate();
                     break;
+                }
+                case DMOutputEventIds.StartEventId:
+                case DMOutputEventIds.StopEventId:
+                case DMOutputEventIds.PauseEventId:
+                {
+                    Debug.Console(2, this, "DM Output {0} Stream Status EventId", args.Number);
+                    if (OutputStreamCardStateFeedbacks[args.Number] != null)
+                    {
+                        OutputStreamCardStateFeedbacks[args.Number].FireUpdate();
+                    }
+                    else
+                        Debug.Console(2, this, "No index of {0} found in OutputStreamCardStateFeedbacks");
+                    break;
                 }
                 default:
                 {
@@ -1242,13 +1326,16 @@ namespace PepperDash.Essentials.DM
                 }
                 else
                 {
-                    LinkHdmiInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
-                }
-
-                if (RxDictionary.ContainsKey(ioSlot))
-                {
-                    LinkRxToApi(trilist, ioSlot, joinMap, ioSlotJoin);
-                }
+                    LinkHdmiInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                    LinkStreamInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                }
+
+                if (RxDictionary.ContainsKey(ioSlot))
+                {
+                    LinkRxToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                }
+                else
+                    LinkStreamOutputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
             }
         }
 
@@ -1295,6 +1382,86 @@ namespace PepperDash.Essentials.DM
             {
                 trilist.UShortInput[joinMap.HdcpSupportCapability.JoinNumber + ioSlotJoin].UShortValue = 1;
             }
+        }
+
+        private void LinkStreamInputToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)
+        {
+            var inputPort = InputPorts[string.Format("inputCard{0}--streamIn", ioSlot)];
+            if (inputPort == null)
+            {
+                return;
+            }
+            var streamCard = Chassis.Inputs[ioSlot].Card as DmcStr;
+            var join = joinMap.InputStreamCardState.JoinNumber + ioSlotJoin;
+
+            Debug.Console(1, "Port value for input card {0} is set as a stream card", ioSlot);
+
+            trilist.SetUShortSigAction(join, s =>
+            {
+                if (s == 1)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to start", join, s);
+                    streamCard.Control.Start();
+                }
+                else if (s == 2)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to stop", join, s);
+                    streamCard.Control.Stop();
+                }
+                else if (s == 3)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to pause", join, s);
+                    streamCard.Control.Pause();
+                }
+                else
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Ignore stream state", join, s);
+                }
+            });
+
+            InputStreamCardStateFeedbacks[ioSlot].LinkInputSig(trilist.UShortInput[join]);
+
+            trilist.UShortInput[join].UShortValue = InputStreamCardStateFeedbacks[ioSlot].UShortValue;
+        }
+
+        private void LinkStreamOutputToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)
+        {
+            var outputPort = OutputPorts[string.Format("outputCard{0}--streamOut", ioSlot)];
+            if (outputPort == null)
+            {
+                return;
+            }
+            var streamCard = Chassis.Outputs[ioSlot].Card as DmcStroAV;
+            var join = joinMap.OutputStreamCardState.JoinNumber + ioSlotJoin;
+
+            Debug.Console(1, "Port value for output card {0} is set as a stream card", ioSlot);
+
+            trilist.SetUShortSigAction(join, s =>
+            {
+                if (s == 1)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to start", join, s);
+                    streamCard.Control.Start();
+                }
+                else if (s == 2)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to stop", join, s);
+                    streamCard.Control.Stop();
+                }
+                else if (s == 3)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to pause", join, s);
+                    streamCard.Control.Pause();
+                }
+                else
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Ignore stream state", join, s);
+                }
+            });
+
+            OutputStreamCardStateFeedbacks[ioSlot].LinkInputSig(trilist.UShortInput[join]);
+
+            trilist.UShortInput[join].UShortValue = OutputStreamCardStateFeedbacks[ioSlot].UShortValue;
         }
 
         private void LinkRxToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)

essentials-framework/Essentials DM/Essentials_DM/Endpoints/DGEs/Dge100Controller.cs

@@ -39,12 +39,12 @@ namespace PepperDash.Essentials.DM.Endpoints.DGEs
         {
             _dge = device;
             _dgeEthernetInfo = _dge.ExtenderEthernetReservedSigs;
-            _dgeEthernetInfo.DeviceExtenderSigChange += (extender, args) => UpdateDeviceInfo();
+            //_dgeEthernetInfo.DeviceExtenderSigChange += (extender, args) => UpdateDeviceInfo();
             _dgeEthernetInfo.Use();
 
             DeviceInfo = new DeviceInfo();
 
-            _dge.OnlineStatusChange += (currentDevice, args) => { if (args.DeviceOnLine) UpdateDeviceInfo(); };
+            //_dge.OnlineStatusChange += (currentDevice, args) => { if (args.DeviceOnLine) UpdateDeviceInfo(); };
 
             _dc = dc;
 

essentials-framework/Essentials DM/Essentials_DM/Endpoints/Transmitters/DmTx4kz302CController.cs

@@ -1,44 +1,44 @@
-using Crestron.SimplSharpPro;
-using System;
-using System.Linq;
-//using Crestron.SimplSharpPro.DeviceSupport;
-using Crestron.SimplSharpPro.DeviceSupport;
-using Crestron.SimplSharpPro.DM;
-using Crestron.SimplSharpPro.DM.Endpoints;
-using Crestron.SimplSharpPro.DM.Endpoints.Transmitters;
-
-using PepperDash.Core;
-using PepperDash.Essentials.Core;
-using PepperDash.Essentials.Core.Bridges;
-
-namespace PepperDash.Essentials.DM
-{
-    using eVst = eX02VideoSourceType;
-    using eAst = eX02AudioSourceType;
-
-
+using Crestron.SimplSharpPro;
+using System;
+using System.Linq;
+//using Crestron.SimplSharpPro.DeviceSupport;
+using Crestron.SimplSharpPro.DeviceSupport;
+using Crestron.SimplSharpPro.DM;
+using Crestron.SimplSharpPro.DM.Endpoints;
+using Crestron.SimplSharpPro.DM.Endpoints.Transmitters;
+
+using PepperDash.Core;
+using PepperDash.Essentials.Core;
+using PepperDash.Essentials.Core.Bridges;
+
+namespace PepperDash.Essentials.DM
+{
+    using eVst = eX02VideoSourceType;
+    using eAst = eX02AudioSourceType;
+
+
     [Description("Wrapper class for DM-TX-4K-Z-302-C")]
-    public class DmTx4kz302CController : DmTxControllerBase, ITxRoutingWithFeedback, IHasFeedback,
-        IIROutputPorts, IComPorts
-    {
-        public DmTx4kz302C Tx { get; private set; }
-
-        public RoutingInputPortWithVideoStatuses HdmiIn1 { get; private set; }
-        public RoutingInputPortWithVideoStatuses HdmiIn2 { get; private set; }
-        public RoutingInputPortWithVideoStatuses DisplayPortIn { get; private set; }
-        public RoutingOutputPort DmOut { get; private set; }
-        public RoutingOutputPort HdmiLoopOut { get; private set; }
-
-        public override StringFeedback ActiveVideoInputFeedback { get; protected set; }
-        public IntFeedback VideoSourceNumericFeedback { get; protected set; }
-        public IntFeedback AudioSourceNumericFeedback { get; protected set; }
-        public IntFeedback HdmiIn1HdcpCapabilityFeedback { get; protected set; }
-        public IntFeedback HdmiIn2HdcpCapabilityFeedback { get; protected set; }
-        public BoolFeedback Hdmi1VideoSyncFeedback { get; protected set; }
-        public BoolFeedback Hdmi2VideoSyncFeedback { get; protected set; }
-        public BoolFeedback DisplayPortVideoSyncFeedback { get; protected set; }
-
-        //public override IntFeedback HdcpSupportAllFeedback { get; protected set; }
+    public class DmTx4kz302CController : DmTxControllerBase, ITxRoutingWithFeedback, IHasFeedback,
+        IIROutputPorts, IComPorts
+    {
+        public DmTx4kz302C Tx { get; private set; }
+
+        public RoutingInputPortWithVideoStatuses HdmiIn1 { get; private set; }
+        public RoutingInputPortWithVideoStatuses HdmiIn2 { get; private set; }
+        public RoutingInputPortWithVideoStatuses DisplayPortIn { get; private set; }
+        public RoutingOutputPort DmOut { get; private set; }
+        public RoutingOutputPort HdmiLoopOut { get; private set; }
+
+        public override StringFeedback ActiveVideoInputFeedback { get; protected set; }
+        public IntFeedback VideoSourceNumericFeedback { get; protected set; }
+        public IntFeedback AudioSourceNumericFeedback { get; protected set; }
+        public IntFeedback HdmiIn1HdcpCapabilityFeedback { get; protected set; }
+        public IntFeedback HdmiIn2HdcpCapabilityFeedback { get; protected set; }
+        public BoolFeedback Hdmi1VideoSyncFeedback { get; protected set; }
+        public BoolFeedback Hdmi2VideoSyncFeedback { get; protected set; }
+        public BoolFeedback DisplayPortVideoSyncFeedback { get; protected set; }
+
+        //public override IntFeedback HdcpSupportAllFeedback { get; protected set; }
         //public override ushort HdcpSupportCapability { get; protected set; }
 
         //IroutingNumericEvent
@@ -52,272 +52,286 @@ namespace PepperDash.Essentials.DM
         {
             var newEvent = NumericSwitchChange;
             if (newEvent != null) newEvent(this, e);
-        }
-
-        /// <summary>
-        /// Helps get the "real" inputs, including when in Auto
-        /// </summary>
-        public eX02VideoSourceType ActualActiveVideoInput
-        {
-            get
-            {
-                if (Tx.VideoSourceFeedback != eVst.Auto)
-                    return Tx.VideoSourceFeedback;
-                if (Tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue)
-                    return eVst.Hdmi1;
-                if (Tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue)
-                    return eVst.Hdmi2;
-
-                return Tx.DisplayPortInput.SyncDetectedFeedback.BoolValue ? eVst.Vga : eVst.AllDisabled;
-            }
-        }
-        public RoutingPortCollection<RoutingInputPort> InputPorts
-        {
-            get
-            {
-                return new RoutingPortCollection<RoutingInputPort> 
-				{ 
-					HdmiIn1,
-					HdmiIn2,
-					DisplayPortIn, 
-					AnyVideoInput 
-				};
-            }
-        }
-        public RoutingPortCollection<RoutingOutputPort> OutputPorts
-        {
-            get
-            {
-                return new RoutingPortCollection<RoutingOutputPort> { DmOut, HdmiLoopOut };
-            }
-        }
-        public DmTx4kz302CController(string key, string name, DmTx4kz302C tx)
-            : base(key, name, tx)
-        {
-            Tx = tx;
-
-            HdmiIn1 = new RoutingInputPortWithVideoStatuses(DmPortName.HdmiIn1,
-                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.Hdmi, eVst.Hdmi1, this,
+        }
+
+        /// <summary>
+        /// Helps get the "real" inputs, including when in Auto
+        /// </summary>
+        public eX02VideoSourceType ActualActiveVideoInput
+        {
+            get
+            {
+                if (Tx.VideoSourceFeedback != eVst.Auto)
+                    return Tx.VideoSourceFeedback;
+                if (Tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue)
+                    return eVst.Hdmi1;
+                if (Tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue)
+                    return eVst.Hdmi2;
+
+                return Tx.DisplayPortInput.SyncDetectedFeedback.BoolValue ? eVst.Vga : eVst.AllDisabled;
+            }
+        }
+        public RoutingPortCollection<RoutingInputPort> InputPorts
+        {
+            get
+            {
+                return new RoutingPortCollection<RoutingInputPort> 
+				{ 
+					HdmiIn1,
+					HdmiIn2,
+					DisplayPortIn, 
+					AnyVideoInput 
+				};
+            }
+        }
+        public RoutingPortCollection<RoutingOutputPort> OutputPorts
+        {
+            get
+            {
+                return new RoutingPortCollection<RoutingOutputPort> { DmOut, HdmiLoopOut };
+            }
+        }
+        public DmTx4kz302CController(string key, string name, DmTx4kz302C tx)
+            : base(key, name, tx)
+        {
+            Tx = tx;
+
+            HdmiIn1 = new RoutingInputPortWithVideoStatuses(DmPortName.HdmiIn1,
+                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.Hdmi, eVst.Hdmi1, this,
                 VideoStatusHelper.GetHdmiInputStatusFuncs(tx.HdmiInputs[1]))
             {
                 FeedbackMatchObject = eVst.Hdmi1
-            };
-            HdmiIn2 = new RoutingInputPortWithVideoStatuses(DmPortName.HdmiIn2,
-                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.Hdmi, eVst.Hdmi2, this,
+            };
+            HdmiIn2 = new RoutingInputPortWithVideoStatuses(DmPortName.HdmiIn2,
+                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.Hdmi, eVst.Hdmi2, this,
                 VideoStatusHelper.GetHdmiInputStatusFuncs(tx.HdmiInputs[2]))
             {
                 FeedbackMatchObject = eVst.Hdmi2
-            };
-            DisplayPortIn = new RoutingInputPortWithVideoStatuses(DmPortName.DisplayPortIn,
-                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.DisplayPort, eVst.DisplayPort, this,
+            };
+            DisplayPortIn = new RoutingInputPortWithVideoStatuses(DmPortName.DisplayPortIn,
+                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.DisplayPort, eVst.DisplayPort, this,
                 VideoStatusHelper.GetDisplayPortInputStatusFuncs(tx.DisplayPortInput))
             {
                 FeedbackMatchObject = eVst.DisplayPort
-            };
-            ActiveVideoInputFeedback = new StringFeedback("ActiveVideoInput",
-                () => ActualActiveVideoInput.ToString());
-
-            Tx.HdmiInputs[1].InputStreamChange += InputStreamChangeEvent;
-            Tx.HdmiInputs[2].InputStreamChange += InputStreamChangeEvent;
-            Tx.DisplayPortInput.InputStreamChange += DisplayPortInputStreamChange;
-            Tx.BaseEvent += Tx_BaseEvent;
-            Tx.OnlineStatusChange += Tx_OnlineStatusChange;
-
-            VideoSourceNumericFeedback = new IntFeedback(() => (int)Tx.VideoSourceFeedback);
-            AudioSourceNumericFeedback = new IntFeedback(() => (int)Tx.VideoSourceFeedback);
-
-            HdmiIn1HdcpCapabilityFeedback = new IntFeedback("HdmiIn1HdcpCapability", () => (int)tx.HdmiInputs[1].HdcpCapabilityFeedback);
-
-            HdmiIn2HdcpCapabilityFeedback = new IntFeedback("HdmiIn2HdcpCapability", () => (int)tx.HdmiInputs[2].HdcpCapabilityFeedback);
-
-            HdcpStateFeedback =
-                new IntFeedback(
-                    () =>
-                        tx.HdmiInputs[1].HdcpCapabilityFeedback > tx.HdmiInputs[2].HdcpCapabilityFeedback
-                            ? (int)tx.HdmiInputs[1].HdcpCapabilityFeedback
-                            : (int)tx.HdmiInputs[2].HdcpCapabilityFeedback);
-
-            HdcpSupportCapability = eHdcpCapabilityType.Hdcp2_2Support;
-
-            Hdmi1VideoSyncFeedback = new BoolFeedback(() => (bool)tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue);
-
-            Hdmi2VideoSyncFeedback = new BoolFeedback(() => (bool)tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue);
-
-            DisplayPortVideoSyncFeedback = new BoolFeedback(() => (bool)tx.DisplayPortInput.SyncDetectedFeedback.BoolValue);
-
-
-            var combinedFuncs = new VideoStatusFuncsWrapper
-            {
-                HdcpActiveFeedbackFunc = () =>
-                    (ActualActiveVideoInput == eVst.Hdmi1
-                    && tx.HdmiInputs[1].VideoAttributes.HdcpActiveFeedback.BoolValue)
-                    || (ActualActiveVideoInput == eVst.Hdmi2
-                    && tx.HdmiInputs[2].VideoAttributes.HdcpActiveFeedback.BoolValue),
-
-                HdcpStateFeedbackFunc = () =>
-                {
-                    if (ActualActiveVideoInput == eVst.Hdmi1)
-                        return tx.HdmiInputs[1].VideoAttributes.HdcpStateFeedback.ToString();
-                    return ActualActiveVideoInput == eVst.Hdmi2 ? tx.HdmiInputs[2].VideoAttributes.HdcpStateFeedback.ToString() : "";
-                },
-
-                VideoResolutionFeedbackFunc = () =>
-                {
-                    if (ActualActiveVideoInput == eVst.Hdmi1)
-                        return tx.HdmiInputs[1].VideoAttributes.GetVideoResolutionString();
-                    if (ActualActiveVideoInput == eVst.Hdmi2)
-                        return tx.HdmiInputs[2].VideoAttributes.GetVideoResolutionString();
-                    return ActualActiveVideoInput == eVst.Vga ? tx.DisplayPortInput.VideoAttributes.GetVideoResolutionString() : "";
-                },
-                VideoSyncFeedbackFunc = () =>
-                    (ActualActiveVideoInput == eVst.Hdmi1
-                    && tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue)
-                    || (ActualActiveVideoInput == eVst.Hdmi2
-                    && tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue)
-                    || (ActualActiveVideoInput == eVst.Vga
-                    && tx.DisplayPortInput.SyncDetectedFeedback.BoolValue)
-
-            };
-
-            AnyVideoInput = new RoutingInputPortWithVideoStatuses(DmPortName.AnyVideoIn,
-                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.None, 0, this, combinedFuncs);
-
-            DmOut = new RoutingOutputPort(DmPortName.DmOut, eRoutingSignalType.Audio | eRoutingSignalType.Video,
-                eRoutingPortConnectionType.DmCat, null, this);
-            HdmiLoopOut = new RoutingOutputPort(DmPortName.HdmiLoopOut, eRoutingSignalType.Audio | eRoutingSignalType.Video,
-                eRoutingPortConnectionType.Hdmi, null, this);
-
-
-            AddToFeedbackList(ActiveVideoInputFeedback, VideoSourceNumericFeedback, AudioSourceNumericFeedback,
-                AnyVideoInput.VideoStatus.HasVideoStatusFeedback, AnyVideoInput.VideoStatus.HdcpActiveFeedback,
-                AnyVideoInput.VideoStatus.HdcpStateFeedback, AnyVideoInput.VideoStatus.VideoResolutionFeedback,
-                AnyVideoInput.VideoStatus.VideoSyncFeedback, HdmiIn1HdcpCapabilityFeedback, HdmiIn2HdcpCapabilityFeedback,
-                Hdmi1VideoSyncFeedback, Hdmi2VideoSyncFeedback, DisplayPortVideoSyncFeedback);
-
-            // Set Ports for CEC
-            HdmiIn1.Port = Tx.HdmiInputs[1];
-            HdmiIn2.Port = Tx.HdmiInputs[2];
-            HdmiLoopOut.Port = Tx.HdmiOutput;
-            DmOut.Port = Tx.DmOutput;
-        }
-
-        void DisplayPortInputStreamChange(EndpointInputStream inputStream, EndpointInputStreamEventArgs args)
-        {
-            Debug.Console(2, "{0} event {1} stream {2}", Tx.ToString(), inputStream.ToString(), args.EventId.ToString());
-
-            switch (args.EventId)
-            {
-                case EndpointInputStreamEventIds.SyncDetectedFeedbackEventId:
-                    DisplayPortVideoSyncFeedback.FireUpdate();
-                    break;
-            }
-        }
-
-
-
-        public override bool CustomActivate()
-        {
-            // Link up all of these damned events to the various RoutingPorts via a helper handler
-            Tx.HdmiInputs[1].InputStreamChange += (o, a) => FowardInputStreamChange(HdmiIn1, a.EventId);
-            Tx.HdmiInputs[1].VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(HdmiIn1, a.EventId);
-
-            Tx.HdmiInputs[2].InputStreamChange += (o, a) => FowardInputStreamChange(HdmiIn2, a.EventId);
-            Tx.HdmiInputs[2].VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(HdmiIn2, a.EventId);
-
-            Tx.DisplayPortInput.InputStreamChange += (o, a) => FowardInputStreamChange(DisplayPortIn, a.EventId);
-            Tx.DisplayPortInput.VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(DisplayPortIn, a.EventId);
-
-            // Base does register and sets up comm monitoring.
-            return base.CustomActivate();
-        }
-
-        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
-        {
-            var joinMap = GetDmTxJoinMap(joinStart, joinMapKey);
-
-            if (Hdmi1VideoSyncFeedback != null)
-            {
-                Hdmi1VideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input1VideoSyncStatus.JoinNumber]);
-            }
-            if (Hdmi2VideoSyncFeedback != null)
-            {
-                Hdmi2VideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input2VideoSyncStatus.JoinNumber]);
-            }
-            if (DisplayPortVideoSyncFeedback != null)
-            {
-                DisplayPortVideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input3VideoSyncStatus.JoinNumber]);
-            }
-
-            LinkDmTxToApi(this, trilist, joinMap, bridge);
-        }
-
-        public void ExecuteNumericSwitch(ushort input, ushort output, eRoutingSignalType type)
-        {
-            Debug.Console(2, this, "Executing Numeric Switch to input {0}.", input);
-
-                switch (input)
-                {
-                    case 0:
-                        {
-                            ExecuteSwitch(eVst.Auto, null, eRoutingSignalType.Audio | eRoutingSignalType.Video);
-                            break;
-                        }
-                    case 1:
-                        {
-                            ExecuteSwitch(HdmiIn1.Selector, null, eRoutingSignalType.Audio | eRoutingSignalType.Video);
-                            break;
-                        }
-                    case 2:
-                        {
-                            ExecuteSwitch(HdmiIn2.Selector, null, eRoutingSignalType.Audio | eRoutingSignalType.Video);
-                            break;
-                        }
-                    case 3:
-                        {
-                            ExecuteSwitch(DisplayPortIn.Selector, null, eRoutingSignalType.Audio | eRoutingSignalType.Video);
-                            break;
-                        }
-                    case 4:
-                        {
-                            ExecuteSwitch(eVst.AllDisabled, null, eRoutingSignalType.Audio | eRoutingSignalType.Video);
-                            break;
-                        }
-                }
-            
-
-        }
-
-        public void ExecuteSwitch(object inputSelector, object outputSelector, eRoutingSignalType signalType)
-        {
-            if ((signalType | eRoutingSignalType.Video) == eRoutingSignalType.Video)
-                Tx.VideoSource = (eVst)inputSelector;
-
-            // NOTE:  It's possible that this particular TX model may not like the AudioSource property being set.  
-            // The SIMPL definition only shows a single analog for AudioVideo Source
-            if ((signalType | eRoutingSignalType.Audio) == eRoutingSignalType.Audio)
-                //it doesn't
-                Debug.Console(2, this, "Unable to execute audio-only switch for tx {0}", Key);
-                //Tx.AudioSource = (eAst)inputSelector;
-        }
-
-        void InputStreamChangeEvent(EndpointInputStream inputStream, EndpointInputStreamEventArgs args)
-        {
-            Debug.Console(2, "{0} event {1} stream {2}", Tx.ToString(), inputStream.ToString(), args.EventId.ToString());
-
-            switch (args.EventId)
-            {
-                case EndpointInputStreamEventIds.HdcpSupportOffFeedbackEventId:
-                case EndpointInputStreamEventIds.HdcpSupportOnFeedbackEventId:
-                case EndpointInputStreamEventIds.HdcpCapabilityFeedbackEventId:
-                    if (inputStream == Tx.HdmiInputs[1]) HdmiIn1HdcpCapabilityFeedback.FireUpdate();
-                    if (inputStream == Tx.HdmiInputs[2]) HdmiIn2HdcpCapabilityFeedback.FireUpdate();
-                    HdcpStateFeedback.FireUpdate();
-                    break;
-                case EndpointInputStreamEventIds.SyncDetectedFeedbackEventId:
-                    if (inputStream == Tx.HdmiInputs[1]) Hdmi1VideoSyncFeedback.FireUpdate();
-                    if (inputStream == Tx.HdmiInputs[2]) Hdmi2VideoSyncFeedback.FireUpdate();
-                    break;
-            }
+            };
+            ActiveVideoInputFeedback = new StringFeedback("ActiveVideoInput",
+                () => ActualActiveVideoInput.ToString());
+
+            Tx.HdmiInputs[1].InputStreamChange += InputStreamChangeEvent;
+            Tx.HdmiInputs[2].InputStreamChange += InputStreamChangeEvent;
+            Tx.DisplayPortInput.InputStreamChange += DisplayPortInputStreamChange;
+            Tx.BaseEvent += Tx_BaseEvent;
+            Tx.OnlineStatusChange += Tx_OnlineStatusChange;
+
+            VideoSourceNumericFeedback = new IntFeedback(() => (int)Tx.VideoSourceFeedback);
+            AudioSourceNumericFeedback = new IntFeedback(() => (int)Tx.VideoSourceFeedback);
+
+            HdmiIn1HdcpCapabilityFeedback = new IntFeedback("HdmiIn1HdcpCapability", () => (int)tx.HdmiInputs[1].HdcpCapabilityFeedback);
+
+            HdmiIn2HdcpCapabilityFeedback = new IntFeedback("HdmiIn2HdcpCapability", () => (int)tx.HdmiInputs[2].HdcpCapabilityFeedback);
+
+            HdcpStateFeedback =
+                new IntFeedback(
+                    () =>
+                        tx.HdmiInputs[1].HdcpCapabilityFeedback > tx.HdmiInputs[2].HdcpCapabilityFeedback
+                            ? (int)tx.HdmiInputs[1].HdcpCapabilityFeedback
+                            : (int)tx.HdmiInputs[2].HdcpCapabilityFeedback);
+
+            HdcpSupportCapability = eHdcpCapabilityType.Hdcp2_2Support;
+
+            Hdmi1VideoSyncFeedback = new BoolFeedback(() => (bool)tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue);
+
+            Hdmi2VideoSyncFeedback = new BoolFeedback(() => (bool)tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue);
+
+            DisplayPortVideoSyncFeedback = new BoolFeedback(() => (bool)tx.DisplayPortInput.SyncDetectedFeedback.BoolValue);
+
+
+            var combinedFuncs = new VideoStatusFuncsWrapper
+            {
+                HdcpActiveFeedbackFunc = () =>
+                    (ActualActiveVideoInput == eVst.Hdmi1
+                    && tx.HdmiInputs[1].VideoAttributes.HdcpActiveFeedback.BoolValue)
+                    || (ActualActiveVideoInput == eVst.Hdmi2
+                    && tx.HdmiInputs[2].VideoAttributes.HdcpActiveFeedback.BoolValue),
+
+                HdcpStateFeedbackFunc = () =>
+                {
+                    if (ActualActiveVideoInput == eVst.Hdmi1)
+                        return tx.HdmiInputs[1].VideoAttributes.HdcpStateFeedback.ToString();
+                    return ActualActiveVideoInput == eVst.Hdmi2 ? tx.HdmiInputs[2].VideoAttributes.HdcpStateFeedback.ToString() : "";
+                },
+
+                VideoResolutionFeedbackFunc = () =>
+                {
+                    if (ActualActiveVideoInput == eVst.Hdmi1)
+                        return tx.HdmiInputs[1].VideoAttributes.GetVideoResolutionString();
+                    if (ActualActiveVideoInput == eVst.Hdmi2)
+                        return tx.HdmiInputs[2].VideoAttributes.GetVideoResolutionString();
+                    return ActualActiveVideoInput == eVst.Vga ? tx.DisplayPortInput.VideoAttributes.GetVideoResolutionString() : "";
+                },
+                VideoSyncFeedbackFunc = () =>
+                    (ActualActiveVideoInput == eVst.Hdmi1
+                    && tx.HdmiInputs[1].SyncDetectedFeedback.BoolValue)
+                    || (ActualActiveVideoInput == eVst.Hdmi2
+                    && tx.HdmiInputs[2].SyncDetectedFeedback.BoolValue)
+                    || (ActualActiveVideoInput == eVst.Vga
+                    && tx.DisplayPortInput.SyncDetectedFeedback.BoolValue)
+
+            };
+
+            AnyVideoInput = new RoutingInputPortWithVideoStatuses(DmPortName.AnyVideoIn,
+                eRoutingSignalType.Audio | eRoutingSignalType.Video, eRoutingPortConnectionType.None, 0, this, combinedFuncs);
+
+            DmOut = new RoutingOutputPort(DmPortName.DmOut, eRoutingSignalType.Audio | eRoutingSignalType.Video,
+                eRoutingPortConnectionType.DmCat, null, this);
+            HdmiLoopOut = new RoutingOutputPort(DmPortName.HdmiLoopOut, eRoutingSignalType.Audio | eRoutingSignalType.Video,
+                eRoutingPortConnectionType.Hdmi, null, this);
+
+
+            AddToFeedbackList(ActiveVideoInputFeedback, VideoSourceNumericFeedback, AudioSourceNumericFeedback,
+                AnyVideoInput.VideoStatus.HasVideoStatusFeedback, AnyVideoInput.VideoStatus.HdcpActiveFeedback,
+                AnyVideoInput.VideoStatus.HdcpStateFeedback, AnyVideoInput.VideoStatus.VideoResolutionFeedback,
+                AnyVideoInput.VideoStatus.VideoSyncFeedback, HdmiIn1HdcpCapabilityFeedback, HdmiIn2HdcpCapabilityFeedback,
+                Hdmi1VideoSyncFeedback, Hdmi2VideoSyncFeedback, DisplayPortVideoSyncFeedback);
+
+            // Set Ports for CEC
+            HdmiIn1.Port = Tx.HdmiInputs[1];
+            HdmiIn2.Port = Tx.HdmiInputs[2];
+            HdmiLoopOut.Port = Tx.HdmiOutput;
+            DmOut.Port = Tx.DmOutput;
+        }
+
+        void DisplayPortInputStreamChange(EndpointInputStream inputStream, EndpointInputStreamEventArgs args)
+        {
+            Debug.Console(2, "{0} event {1} stream {2}", Tx.ToString(), inputStream.ToString(), args.EventId.ToString());
+
+            switch (args.EventId)
+            {
+                case EndpointInputStreamEventIds.SyncDetectedFeedbackEventId:
+                    DisplayPortVideoSyncFeedback.FireUpdate();
+                    break;
+            }
+        }
+
+
+
+        public override bool CustomActivate()
+        {
+            // Link up all of these damned events to the various RoutingPorts via a helper handler
+            Tx.HdmiInputs[1].InputStreamChange += (o, a) => FowardInputStreamChange(HdmiIn1, a.EventId);
+            Tx.HdmiInputs[1].VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(HdmiIn1, a.EventId);
+
+            Tx.HdmiInputs[2].InputStreamChange += (o, a) => FowardInputStreamChange(HdmiIn2, a.EventId);
+            Tx.HdmiInputs[2].VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(HdmiIn2, a.EventId);
+
+            Tx.DisplayPortInput.InputStreamChange += (o, a) => FowardInputStreamChange(DisplayPortIn, a.EventId);
+            Tx.DisplayPortInput.VideoAttributes.AttributeChange += (o, a) => ForwardVideoAttributeChange(DisplayPortIn, a.EventId);
+
+            // Base does register and sets up comm monitoring.
+            return base.CustomActivate();
+        }
+
+        public override void LinkToApi(BasicTriList trilist, uint joinStart, string joinMapKey, EiscApiAdvanced bridge)
+        {
+            var joinMap = GetDmTxJoinMap(joinStart, joinMapKey);
+
+            if (Hdmi1VideoSyncFeedback != null)
+            {
+                Hdmi1VideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input1VideoSyncStatus.JoinNumber]);
+            }
+            if (Hdmi2VideoSyncFeedback != null)
+            {
+                Hdmi2VideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input2VideoSyncStatus.JoinNumber]);
+            }
+            if (DisplayPortVideoSyncFeedback != null)
+            {
+                DisplayPortVideoSyncFeedback.LinkInputSig(trilist.BooleanInput[joinMap.Input3VideoSyncStatus.JoinNumber]);
+            }
+
+            LinkDmTxToApi(this, trilist, joinMap, bridge);
+        }
+
+        public void ExecuteNumericSwitch(ushort input, ushort output, eRoutingSignalType type)
+        {
+            Debug.Console(2, this, "Executing Numeric Switch to input {0}.", input);
+
+                switch (input)
+                {
+                    case 0:
+                        {
+                            ExecuteSwitch(eVst.Auto, null, type);
+                            break;
+                        }
+                    case 1:
+                        {
+                            ExecuteSwitch(HdmiIn1.Selector, null, type);
+                            break;
+                        }
+                    case 2:
+                        {
+                            ExecuteSwitch(HdmiIn2.Selector, null, type);
+                            break;
+                        }
+                    case 3:
+                        {
+                            ExecuteSwitch(DisplayPortIn.Selector, null, type);
+                            break;
+                        }
+                    case 4:
+                        {
+                            ExecuteSwitch(eVst.AllDisabled, null, type);
+                            break;
+                        }
+                    default:
+                    {
+                        Debug.Console(2, this, "Unable to execute numeric switch to input {0}", input);
+                        break;
+                    }
+
+                }
+            
+
+        }
+
+        public void ExecuteSwitch(object inputSelector, object outputSelector, eRoutingSignalType signalType)
+        {
+            try
+            {
+                Debug.Console(2, this, "Attempting to switch InputSelector {0}", ((eVst)inputSelector).ToString());
+                if ((signalType | eRoutingSignalType.Video) == eRoutingSignalType.Video)
+                    Tx.VideoSource = (eVst)inputSelector;
+
+                // NOTE:  It's possible that this particular TX model may not like the AudioSource property being set.  
+                // The SIMPL definition only shows a single analog for AudioVideo Source
+                if ((signalType | eRoutingSignalType.Audio) == eRoutingSignalType.Audio)
+                    //it doesn't
+                    Debug.Console(2, this, "Unable to execute audio-only switch for tx {0}", Key);
+                //Tx.AudioSource = (eAst)inputSelector;
+            }
+            catch (Exception e)
+            {
+                Debug.Console(2, this, "Exception in ExecuteSwitch: {0}", e);
+            }
+        }
+
+        void InputStreamChangeEvent(EndpointInputStream inputStream, EndpointInputStreamEventArgs args)
+        {
+            Debug.Console(2, "{0} event {1} stream {2}", Tx.ToString(), inputStream.ToString(), args.EventId.ToString());
+
+            switch (args.EventId)
+            {
+                case EndpointInputStreamEventIds.HdcpSupportOffFeedbackEventId:
+                case EndpointInputStreamEventIds.HdcpSupportOnFeedbackEventId:
+                case EndpointInputStreamEventIds.HdcpCapabilityFeedbackEventId:
+                    if (inputStream == Tx.HdmiInputs[1]) HdmiIn1HdcpCapabilityFeedback.FireUpdate();
+                    if (inputStream == Tx.HdmiInputs[2]) HdmiIn2HdcpCapabilityFeedback.FireUpdate();
+                    HdcpStateFeedback.FireUpdate();
+                    break;
+                case EndpointInputStreamEventIds.SyncDetectedFeedbackEventId:
+                    if (inputStream == Tx.HdmiInputs[1]) Hdmi1VideoSyncFeedback.FireUpdate();
+                    if (inputStream == Tx.HdmiInputs[2]) Hdmi2VideoSyncFeedback.FireUpdate();
+                    break;
+            }
         }
 
         void Tx_OnlineStatusChange(GenericBase currentDevice, OnlineOfflineEventArgs args)
@@ -356,57 +370,57 @@ namespace PepperDash.Essentials.DM
                     OnSwitchChange(new RoutingNumericEventArgs(1, AudioSourceNumericFeedback.UShortValue, OutputPorts.First(), localInputAudioPort, eRoutingSignalType.Audio));
                     break;
             }
-        }
-
-        /// <summary>
-        /// Relays the input stream change to the appropriate RoutingInputPort.
-        /// </summary>
-        void FowardInputStreamChange(RoutingInputPortWithVideoStatuses inputPort, int eventId)
-        {
-            if (eventId != EndpointInputStreamEventIds.SyncDetectedFeedbackEventId) return;
-            inputPort.VideoStatus.VideoSyncFeedback.FireUpdate();
-            AnyVideoInput.VideoStatus.VideoSyncFeedback.FireUpdate();
-        }
-
-        /// <summary>
-        /// Relays the VideoAttributes change to a RoutingInputPort
-        /// </summary>
-        void ForwardVideoAttributeChange(RoutingInputPortWithVideoStatuses inputPort, int eventId)
-        {
-            //// LOCATION: Crestron.SimplSharpPro.DM.VideoAttributeEventIds
-            //Debug.Console(2, this, "VideoAttributes_AttributeChange event id={0} from {1}",
-            //    args.EventId, (sender as VideoAttributesEnhanced).Owner.GetType());
-            switch (eventId)
-            {
-                case VideoAttributeEventIds.HdcpActiveFeedbackEventId:
-                    inputPort.VideoStatus.HdcpActiveFeedback.FireUpdate();
-                    AnyVideoInput.VideoStatus.HdcpActiveFeedback.FireUpdate();
-                    break;
-                case VideoAttributeEventIds.HdcpStateFeedbackEventId:
-                    inputPort.VideoStatus.HdcpStateFeedback.FireUpdate();
-                    AnyVideoInput.VideoStatus.HdcpStateFeedback.FireUpdate();
-                    break;
-                case VideoAttributeEventIds.HorizontalResolutionFeedbackEventId:
-                case VideoAttributeEventIds.VerticalResolutionFeedbackEventId:
-                    inputPort.VideoStatus.VideoResolutionFeedback.FireUpdate();
-                    AnyVideoInput.VideoStatus.VideoResolutionFeedback.FireUpdate();
-                    break;
-                case VideoAttributeEventIds.FramesPerSecondFeedbackEventId:
-                    inputPort.VideoStatus.VideoResolutionFeedback.FireUpdate();
-                    AnyVideoInput.VideoStatus.VideoResolutionFeedback.FireUpdate();
-                    break;
-            }
-        }
-
-
-        #region IIROutputPorts Members
-        public CrestronCollection<IROutputPort> IROutputPorts { get { return Tx.IROutputPorts; } }
-        public int NumberOfIROutputPorts { get { return Tx.NumberOfIROutputPorts; } }
-        #endregion
-
-        #region IComPorts Members
-        public CrestronCollection<ComPort> ComPorts { get { return Tx.ComPorts; } }
-        public int NumberOfComPorts { get { return Tx.NumberOfComPorts; } }
-        #endregion
-    }
+        }
+
+        /// <summary>
+        /// Relays the input stream change to the appropriate RoutingInputPort.
+        /// </summary>
+        void FowardInputStreamChange(RoutingInputPortWithVideoStatuses inputPort, int eventId)
+        {
+            if (eventId != EndpointInputStreamEventIds.SyncDetectedFeedbackEventId) return;
+            inputPort.VideoStatus.VideoSyncFeedback.FireUpdate();
+            AnyVideoInput.VideoStatus.VideoSyncFeedback.FireUpdate();
+        }
+
+        /// <summary>
+        /// Relays the VideoAttributes change to a RoutingInputPort
+        /// </summary>
+        void ForwardVideoAttributeChange(RoutingInputPortWithVideoStatuses inputPort, int eventId)
+        {
+            //// LOCATION: Crestron.SimplSharpPro.DM.VideoAttributeEventIds
+            //Debug.Console(2, this, "VideoAttributes_AttributeChange event id={0} from {1}",
+            //    args.EventId, (sender as VideoAttributesEnhanced).Owner.GetType());
+            switch (eventId)
+            {
+                case VideoAttributeEventIds.HdcpActiveFeedbackEventId:
+                    inputPort.VideoStatus.HdcpActiveFeedback.FireUpdate();
+                    AnyVideoInput.VideoStatus.HdcpActiveFeedback.FireUpdate();
+                    break;
+                case VideoAttributeEventIds.HdcpStateFeedbackEventId:
+                    inputPort.VideoStatus.HdcpStateFeedback.FireUpdate();
+                    AnyVideoInput.VideoStatus.HdcpStateFeedback.FireUpdate();
+                    break;
+                case VideoAttributeEventIds.HorizontalResolutionFeedbackEventId:
+                case VideoAttributeEventIds.VerticalResolutionFeedbackEventId:
+                    inputPort.VideoStatus.VideoResolutionFeedback.FireUpdate();
+                    AnyVideoInput.VideoStatus.VideoResolutionFeedback.FireUpdate();
+                    break;
+                case VideoAttributeEventIds.FramesPerSecondFeedbackEventId:
+                    inputPort.VideoStatus.VideoResolutionFeedback.FireUpdate();
+                    AnyVideoInput.VideoStatus.VideoResolutionFeedback.FireUpdate();
+                    break;
+            }
+        }
+
+
+        #region IIROutputPorts Members
+        public CrestronCollection<IROutputPort> IROutputPorts { get { return Tx.IROutputPorts; } }
+        public int NumberOfIROutputPorts { get { return Tx.NumberOfIROutputPorts; } }
+        #endregion
+
+        #region IComPorts Members
+        public CrestronCollection<ComPort> ComPorts { get { return Tx.ComPorts; } }
+        public int NumberOfComPorts { get { return Tx.NumberOfComPorts; } }
+        #endregion
+    }
 }

essentials-framework/Essentials Devices Common/Essentials Devices Common/Codec/IHasExternalSourceSwitching.cs

@@ -11,6 +11,7 @@ namespace PepperDash.Essentials.Devices.Common.Codec
 	public interface IHasExternalSourceSwitching
 	{
 		bool ExternalSourceListEnabled { get; }
+        string ExternalSourceInputPort { get; }
 		void AddExternalSource(string connectorId, string key, string name, eExternalSourceType type);
 		void SetExternalSourceState(string key, eExternalSourceMode mode);
 		void ClearExternalSources();

essentials-framework/Essentials Devices Common/Essentials Devices Common/SetTopBox/IRSetTopBoxBase.cs

@@ -54,7 +54,7 @@ namespace PepperDash.Essentials.Devices.Common
 			KeypadAccessoryButton1Label = "-";
 
 			HasKeypadAccessoryButton2 = true;
-			KeypadAccessoryButton2Command = "NumericEnter";
+			KeypadAccessoryButton2Command = "KEYPAD_ENTER";
 			KeypadAccessoryButton2Label = "Enter";
 
 			AnyVideoOut = new RoutingOutputPort(RoutingPortNames.AnyVideoOut, eRoutingSignalType.Audio | eRoutingSignalType.Video,

essentials-framework/Essentials Devices Common/Essentials Devices Common/VideoCodec/CiscoCodec/CiscoSparkCodec.cs

@@ -407,6 +407,7 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
 			CreateOsdSource();
 
             ExternalSourceListEnabled = props.ExternalSourceListEnabled;
+            ExternalSourceInputPort = props.ExternalSourceInputPort;
 
             if (props.UiBranding == null)
             {
@@ -416,6 +417,7 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
                 props.UiBranding.BrandingUrl);
 
             BrandingEnabled = props.UiBranding.Enable;
+
             _brandingUrl = props.UiBranding.BrandingUrl;
         }
 
@@ -514,12 +516,16 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
             SendText("xconfiguration userinterface custommessage: \"Scan the QR code with a mobile phone to get started\"");
             SendText("xconfiguration userinterface osd halfwakemessage: \"Tap the touch panel or scan the QR code with a mobile phone to get started\"");
 
+            var checksum = !String.IsNullOrEmpty(mcBridge.QrCodeChecksum)
+                ? String.Format("checksum: {0} ", mcBridge.QrCodeChecksum)
+                : String.Empty;
+
             SendText(String.Format(
-                            "xcommand userinterface branding fetch type: branding url: {0}",
-                            mcBridge.QrCodeUrl));
+                "xcommand userinterface branding fetch {1}type: branding url: {0}",
+                mcBridge.QrCodeUrl, checksum));
             SendText(String.Format(
-                "xcommand userinterface branding fetch type: halfwakebranding url: {0}",
-                mcBridge.QrCodeUrl));
+                "xcommand userinterface branding fetch {1}type: halfwakebranding url: {0}",
+                mcBridge.QrCodeUrl, checksum));
         }
 
         private void SendBrandingUrl()
@@ -1917,7 +1923,7 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
 		#region IHasExternalSourceSwitching Members
 
 		/// <summary>
-		/// Weather the Cisco supports External Source Lists or not 
+		/// Wheather the Cisco supports External Source Lists or not 
 		/// </summary>
 		public bool ExternalSourceListEnabled
 		{
@@ -1925,6 +1931,11 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
 			private set; 
 		}
 
+        /// <summary>
+        /// The name of the RoutingInputPort to which the upstream external switcher is connected
+        /// </summary>
+        public string ExternalSourceInputPort { get;  private set; }
+
         public bool BrandingEnabled { get; private set; }
         private string _brandingUrl;
         private bool _sendMcUrl;
@@ -2102,7 +2113,7 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
     {
         public CiscoSparkCodecFactory()
         {
-            TypeNames = new List<string>() { "ciscospark", "ciscowebex", "ciscowebexpro", "ciscoroomkit" };
+            TypeNames = new List<string>() { "ciscospark", "ciscowebex", "ciscowebexpro", "ciscoroomkit", "ciscosparkpluscodec" };
         }
 
         public override EssentialsDevice BuildDevice(DeviceConfig dc)

essentials-framework/Essentials Devices Common/Essentials Devices Common/VideoCodec/CiscoCodec/CiscoSparkCodecPropertiesConfig.cs

@@ -31,9 +31,18 @@ namespace PepperDash.Essentials.Devices.Common.Codec
         [JsonProperty("sharing")]
         public SharingProperties Sharing { get; set; }
 
+        /// <summary>
+        /// Enables external source switching capability
+        /// </summary>
 		[JsonProperty("externalSourceListEnabled")]
 		public bool ExternalSourceListEnabled { get; set; }
 
+        /// <summary>
+        /// The name of the routing input port on the codec to which the external switch is connected
+        /// </summary>
+        [JsonProperty("externalSourceInputPort")]
+        public string ExternalSourceInputPort { get; set; }
+
         /// <summary>
         /// Optionsal property to set the limit of any phonebook queries for directory or searching
         /// </summary>

essentials-framework/Essentials Devices Common/Essentials Devices Common/VideoCodec/CiscoCodec/xEvent.cs

@@ -1,131 +1,131 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using Crestron.SimplSharp;
-
-namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
-{
-    /// <summary>
-    /// This class exists to capture serialized data sent back by a Cisco codec in JSON output mode
-    /// </summary>
-    public class CiscoCodecEvents
-    {
-        public class CauseValue
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CauseType
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CauseString
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class OrigCallDirection
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class RemoteURI
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class DisplayName
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CallId
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CauseCode
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CauseOrigin
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class Protocol
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class Duration
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CallType
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CallRate
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class Encryption
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class RequestedURI
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class PeopleCountAverage
-        {
-            public string id { get; set; }
-            public string Value { get; set; }
-        }
-
-        public class CallDisconnect
-        {
-            public string id { get; set; }
-            public CauseValue CauseValue { get; set; }
-            public CauseType CauseType { get; set; }
-            public CauseString CauseString { get; set; }
-            public OrigCallDirection OrigCallDirection { get; set; }
-            public RemoteURI RemoteURI { get; set; }
-            public DisplayName DisplayName { get; set; }
-            public CallId CallId { get; set; }
-            public CauseCode CauseCode { get; set; }
-            public CauseOrigin CauseOrigin { get; set; }
-            public Protocol Protocol { get; set; }
-            public Duration Duration { get; set; }
-            public CallType CallType { get; set; }
-            public CallRate CallRate { get; set; }
-            public Encryption Encryption { get; set; }
-            public RequestedURI RequestedURI { get; set; }
-            public PeopleCountAverage PeopleCountAverage { get; set; }
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using Crestron.SimplSharp;
+
+namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
+{
+    /// <summary>
+    /// This class exists to capture serialized data sent back by a Cisco codec in JSON output mode
+    /// </summary>
+    public class CiscoCodecEvents
+    {
+        public class CauseValue
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CauseType
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CauseString
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class OrigCallDirection
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class RemoteURI
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class DisplayName
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CallId
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CauseCode
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CauseOrigin
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class Protocol
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class Duration
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CallType
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CallRate
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class Encryption
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class RequestedURI
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class PeopleCountAverage
+        {
+            public string id { get; set; }
+            public string Value { get; set; }
+        }
+
+        public class CallDisconnect
+        {
+            public string id { get; set; }
+            public CauseValue CauseValue { get; set; }
+            public CauseType CauseType { get; set; }
+            public CauseString CauseString { get; set; }
+            public OrigCallDirection OrigCallDirection { get; set; }
+            public RemoteURI RemoteURI { get; set; }
+            public DisplayName DisplayName { get; set; }
+            public CallId CallId { get; set; }
+            public CauseCode CauseCode { get; set; }
+            public CauseOrigin CauseOrigin { get; set; }
+            public Protocol Protocol { get; set; }
+            public Duration Duration { get; set; }
+            public CallType CallType { get; set; }
+            public CallRate CallRate { get; set; }
+            public Encryption Encryption { get; set; }
+            public RequestedURI RequestedURI { get; set; }
+            public PeopleCountAverage PeopleCountAverage { get; set; }
         }
 		public class UserInterface
 		{
@@ -151,16 +151,16 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
 		{
 			public string id { get; set; }
 			public string Value { get; set; }
-		}
-        public class Event
-        {
+		}
+        public class Event
+        {
             public CallDisconnect CallDisconnect { get; set; }
-			public UserInterface UserInterface { get; set; }
-        }
-
-        public class RootObject
-        {
-            public Event Event { get; set; }
-        }
-    }
+			public UserInterface UserInterface { get; set; }
+        }
+
+        public class RootObject
+        {
+            public Event Event { get; set; }
+        }
+    }
 }

essentials-framework/Essentials Devices Common/Essentials Devices Common/VideoCodec/CiscoCodec/xStatus.cs

@@ -1368,8 +1368,8 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
             {
                 set
                 {
-                    // If the incoming value is "Of" it sets the BoolValue true, otherwise sets it false
-                    BoolValue = value == "Off";
+                    // If the incoming value is "On" it sets the BoolValue true, otherwise sets it false
+                    BoolValue = value == "On";
                     OnValueChanged();
                 }
             }

packages.config

@@ -1,3 +1,3 @@
 <packages>
-  <package id="PepperDashCore" version="1.0.43" targetFramework="net35" allowedVersions="[1.0,1.1)"/>
+  <package id="PepperDashCore" version="1.0.45" targetFramework="net35" allowedVersions="[1.0,1.1)"/>
 </packages>