#524 Fix Fusion Printing

when using donotloadonnextboot

PepperDashEssentials/Bridges/JoinMaps/DmChassisControllerJoinMap.cs

@@ -70,6 +70,14 @@ namespace PepperDash.Essentials.Bridges
         /// Range reports the highest supported HDCP state level for the corresponding input card
         /// </summary>
         public uint HdcpSupportCapability { get; set; }
+        /// <summary>
+        /// DM Chassis Stream Input Start (1), Stop (2), Pause (3) with Feedback
+        /// </summary>
+        public uint InputStreamCardStatus { get; set; }
+        /// <summary>
+        /// DM Chassis Stream Output Start (1), Stop (2), Pause (3) with Feedback
+        /// </summary>
+        public uint OutputStreamCardStatus { get; set; }
 #endregion
 
 #region Serials
@@ -115,6 +123,8 @@ namespace PepperDash.Essentials.Bridges
             InputUsb = 700; //701-899
             HdcpSupportState = 1000; //1001-1199
             HdcpSupportCapability = 1200; //1201-1399
+            InputStreamCardStatus = 1500; //1501-1532
+            OutputStreamCardStatus = 1600; //1601-1632
 
 
             //Serial
@@ -145,6 +155,8 @@ namespace PepperDash.Essentials.Bridges
             OutputEndpointOnline = OutputEndpointOnline + joinOffset;
             HdcpSupportState = HdcpSupportState + joinOffset;
             HdcpSupportCapability = HdcpSupportCapability + joinOffset;
+            InputStreamCardStatus = InputStreamCardStatus + joinOffset;
+            OutputStreamCardStatus = OutputStreamCardStatus + joinOffset;
             OutputDisabledByHdcp = OutputDisabledByHdcp + joinOffset;
             TxAdvancedIsPresent = TxAdvancedIsPresent + joinOffset;
         }

PepperDashEssentials/ControlSystem.cs

@@ -12,6 +12,7 @@ using PepperDash.Core;
 using PepperDash.Essentials.Core;
 using PepperDash.Essentials.Core.Bridges;
 using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Fusion;
 using PepperDash.Essentials.Devices.Common;
 using PepperDash.Essentials.DM;
 using PepperDash.Essentials.Fusion;
@@ -52,7 +53,7 @@ namespace PepperDash.Essentials
 
             if (Debug.DoNotLoadOnNextBoot)
             {
-                CrestronConsole.AddNewConsoleCommand(s => GoWithLoad(), "go", "Loads configuration file",
+                CrestronConsole.AddNewConsoleCommand(s => CrestronInvoke.BeginInvoke((o) => GoWithLoad()), "go", "Loads configuration file",
                     ConsoleAccessLevelEnum.AccessOperator);
             }
 
@@ -436,7 +437,7 @@ namespace PepperDash.Essentials
                         DeviceManager.AddDevice(room);
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Room is EssentialsHuddleSpaceRoom, attempting to add to DeviceManager with Fusion");
-                        DeviceManager.AddDevice(new Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase((EssentialsHuddleSpaceRoom)room, 0xf1));
+                        DeviceManager.AddDevice(new Core.Fusion.EssentialsHuddleSpaceFusionSystemControllerBase(room, 0xf1));
 
 
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to build Mobile Control Bridge...");
@@ -454,6 +455,18 @@ namespace PepperDash.Essentials
 
                         CreateMobileControlBridge(room);
                     }
+                    else if (room is EssentialsTechRoom)
+                    {
+                        DeviceManager.AddDevice(room);
+
+                        Debug.Console(0, Debug.ErrorLogLevel.Notice,
+                            "Room is EssentialsTechRoom, Attempting to add to DeviceManager with Fusion");
+                        DeviceManager.AddDevice(new EssentialsHuddleSpaceFusionSystemControllerBase(room, 0xF1));
+
+                        Debug.Console(0, Debug.ErrorLogLevel.Notice, "Attempting to build Mobile Control Bridge");
+
+                        CreateMobileControlBridge(room);
+                    }
                     else
                     {
                         Debug.Console(0, Debug.ErrorLogLevel.Notice, "Room is NOT EssentialsRoom, attempting to add to DeviceManager w/o Fusion");

PepperDashEssentials/PepperDashEssentials.csproj

@@ -141,11 +141,13 @@
     <Compile Include="Room\Config\EssentialsHuddleRoomPropertiesConfig.cs" />
     <Compile Include="Room\Config\EssentialsHuddleVtc1PropertiesConfig.cs" />
     <Compile Include="Room\Config\EssentialsRoomEmergencyConfig.cs" />
+    <Compile Include="Room\Config\EssentialsTechRoomConfig.cs" />
     <Compile Include="Room\Emergency\EsentialsRoomEmergencyContactClosure.cs" />
     <Compile Include="Room\Types\EssentialsDualDisplayRoom.cs" />
     <Compile Include="Room\Types\EssentialsHuddleVtc1Room.cs" />
     <Compile Include="Room\Types\EssentialsNDisplayRoomBase.cs" />
     <Compile Include="Room\Config\EssentialsRoomConfig.cs" />
+    <Compile Include="Room\Types\EssentialsTechRoom.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsEnvironmentDriver.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsLightingDriver.cs" />
     <Compile Include="UIDrivers\Environment Drivers\EssentialsShadeDriver.cs" />

PepperDashEssentials/Room/Config/EssentialsRoomConfig.cs

@@ -22,30 +22,25 @@ namespace PepperDash.Essentials.Room.Config
 		public static Device GetRoomObject(DeviceConfig roomConfig)
 		{
 			var typeName = roomConfig.Type.ToLower();
+
 			if (typeName == "huddle")
 			{
-                var huddle = new EssentialsHuddleSpaceRoom(roomConfig);
-
-                return huddle;
+                return new EssentialsHuddleSpaceRoom(roomConfig);
 			}
-            else if (typeName == "huddlevtc1")
-            {
-                var rm = new EssentialsHuddleVtc1Room(roomConfig);
-                
-                return rm;
-            }
-			else if (typeName == "ddvc01Bridge")
-			{
-				return new Device(roomConfig.Key, roomConfig.Name); // placeholder device that does nothing.
-			}
-            else if (typeName == "dualdisplay")
-            {
-                var rm = new EssentialsDualDisplayRoom(roomConfig);
+		    if (typeName == "huddlevtc1")
+		    {
+		        return new EssentialsHuddleVtc1Room(roomConfig);
+		    }
+		    if (typeName == "ddvc01bridge")
+		    {
+		        return new Device(roomConfig.Key, roomConfig.Name); // placeholder device that does nothing.
+		    }
+		    if (typeName == "dualdisplay")
+		    {
+		        return new EssentialsDualDisplayRoom(roomConfig);
+		    }
 
-                return rm;
-            }
-
-            return null;
+		    return typeName != "techroom" ? null : new EssentialsTechRoom(roomConfig);
 		}
 
         /// <summary>

PepperDashEssentials/Room/Config/EssentialsTechRoomConfig.cs

@@ -0,0 +1,33 @@
+using System.Collections.Generic;
+using Newtonsoft.Json;
+
+namespace PepperDash.Essentials.Room.Config
+{
+    public class EssentialsTechRoomConfig
+    {
+        [JsonProperty("displays")]
+        public List<string> Displays;
+        
+        [JsonProperty("tuners")]
+        public List<string> Tuners;
+
+        [JsonProperty("userPin")]
+        public string UserPin;
+
+        [JsonProperty("techPin")]
+        public string TechPin;
+
+        [JsonProperty("presetFileName")]
+        public string PresetsFileName;
+
+        [JsonProperty("scheduledEvents")]
+        public List<ScheduledEventConfig> ScheduledEvents;
+
+        public EssentialsTechRoomConfig()
+        {
+            Displays = new List<string>();
+            Tuners = new List<string>();
+            ScheduledEvents = new List<ScheduledEventConfig>();
+        }
+    }
+}

PepperDashEssentials/Room/Types/EssentialsTechRoom.cs

@@ -0,0 +1,271 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using Crestron.SimplSharp;
+using Crestron.SimplSharp.Scheduler;
+using Newtonsoft.Json.Linq;
+using PepperDash.Core;
+using PepperDash.Essentials.Core;
+using PepperDash.Essentials.Core.Config;
+using PepperDash.Essentials.Core.Presets;
+using PepperDash.Essentials.Devices.Common;
+using PepperDash.Essentials.Room.Config;
+
+namespace PepperDash.Essentials
+{
+    public class EssentialsTechRoom : EssentialsRoomBase
+    {
+        private readonly EssentialsTechRoomConfig _config;
+        private readonly Dictionary<string, TwoWayDisplayBase> _displays;
+
+        private readonly DevicePresetsModel _tunerPresets;
+        private readonly Dictionary<string, IRSetTopBoxBase> _tuners;
+
+        private ScheduledEventGroup _roomScheduledEventGroup;
+
+        public EssentialsTechRoom(DeviceConfig config) : base(config)
+        {
+            _config = config.Properties.ToObject<EssentialsTechRoomConfig>();
+
+            _tunerPresets = new DevicePresetsModel(String.Format("{0}-presets", config.Key), _config.PresetsFileName);
+
+            _tunerPresets.LoadChannels();
+
+            _tuners = GetDevices<IRSetTopBoxBase>(_config.Tuners);
+            _displays = GetDevices<TwoWayDisplayBase>(_config.Displays);
+
+            RoomPowerIsOnFeedback = new BoolFeedback(() => RoomPowerIsOn);
+
+            SubscribeToDisplayFeedbacks();
+
+            CreateOrUpdateScheduledEvents();
+        }
+
+        public DevicePresetsModel TunerPresets
+        {
+            get { return _tunerPresets; }
+        }
+
+        public Dictionary<string, IRSetTopBoxBase> Tuners
+        {
+            get { return _tuners; }
+        }
+
+        public Dictionary<string, TwoWayDisplayBase> Displays
+        {
+            get { return _displays; }
+        }
+
+        public BoolFeedback RoomPowerIsOnFeedback { get; private set; }
+
+        public bool RoomPowerIsOn
+        {
+            get { return _displays.All(kv => kv.Value.PowerIsOnFeedback.BoolValue); }
+        }
+
+        private void SubscribeToDisplayFeedbacks()
+        {
+            foreach (var display in _displays)
+            {
+                display.Value.PowerIsOnFeedback.OutputChange +=
+                    (sender, args) => RoomPowerIsOnFeedback.InvokeFireUpdate();
+            }
+        }
+
+        private void CreateOrUpdateScheduledEvents()
+        {
+            var eventsConfig = _config.ScheduledEvents;
+
+            GetOrCreateScheduleGroup();
+
+            foreach (var eventConfig in eventsConfig)
+            {
+                CreateOrUpdateSingleEvent(eventConfig);
+            }
+
+            _roomScheduledEventGroup.UserGroupCallBack += HandleScheduledEvent;
+        }
+
+        private void GetOrCreateScheduleGroup()
+        {
+            if (_roomScheduledEventGroup == null)
+            {
+                _roomScheduledEventGroup = Scheduler.GetEventGroup(Key) ?? new ScheduledEventGroup(Key);
+
+                Scheduler.AddEventGroup(_roomScheduledEventGroup);
+            }
+
+            _roomScheduledEventGroup.RetrieveAllEvents();
+        }
+
+        private void CreateOrUpdateSingleEvent(ScheduledEventConfig scheduledEvent)
+        {
+            if (!_roomScheduledEventGroup.ScheduledEvents.ContainsKey(scheduledEvent.Key))
+            {
+                SchedulerUtilities.CreateEventFromConfig(scheduledEvent, _roomScheduledEventGroup, HandleScheduledEvent);
+                return;
+            }
+
+            var roomEvent = _roomScheduledEventGroup.ScheduledEvents[scheduledEvent.Key];
+
+            if (!SchedulerUtilities.CheckEventTimeForMatch(roomEvent, DateTime.Parse(scheduledEvent.Time)) &&
+                !SchedulerUtilities.CheckEventRecurrenceForMatch(roomEvent, scheduledEvent.Days))
+            {
+                return;
+            }
+
+            Debug.Console(1, this,
+                "Existing event does not match new config properties. Deleting existing event '{0}' and creating new event from configuration",
+                roomEvent.Name);
+
+            _roomScheduledEventGroup.DeleteEvent(roomEvent);
+
+            SchedulerUtilities.CreateEventFromConfig(scheduledEvent, _roomScheduledEventGroup, HandleScheduledEvent);
+        }
+
+        public void AddOrUpdateScheduledEvent(ScheduledEventConfig scheduledEvent)
+        {
+            //update config based on key of scheduleEvent
+            GetOrCreateScheduleGroup();
+            var existingEvent = _config.ScheduledEvents.FirstOrDefault(e => e.Key == scheduledEvent.Key);
+
+            if (existingEvent == null)
+            {
+                _config.ScheduledEvents.Add(scheduledEvent);
+            }
+
+            //create or update event based on config
+            CreateOrUpdateSingleEvent(scheduledEvent);
+            //save config
+            Config.Properties = JToken.FromObject(_config);
+
+            CustomSetConfig(Config);
+            //Fire Event
+            OnScheduledEventUpdate();
+        }
+
+        private void OnScheduledEventUpdate()
+        {
+            var handler = ScheduledEventsChanged;
+
+            if (handler == null)
+            {
+                return;
+            }
+
+            handler(this, new ScheduledEventEventArgs {ScheduledEvents = _config.ScheduledEvents});
+        }
+
+        public event EventHandler<ScheduledEventEventArgs> ScheduledEventsChanged;
+
+        private void HandleScheduledEvent(ScheduledEvent schevent, ScheduledEventCommon.eCallbackReason type)
+        {
+            var eventConfig = _config.ScheduledEvents.FirstOrDefault(e => e.Key == schevent.Name);
+
+            if (eventConfig == null)
+            {
+                Debug.Console(1, this, "Event with name {0} not found", schevent.Name);
+                return;
+            }
+
+            Debug.Console(1, this, "Running actions for event {0}", schevent.Name);
+
+            if (eventConfig.Acknowledgeable)
+            {
+                schevent.Acknowledge();
+            }
+
+            CrestronInvoke.BeginInvoke((o) =>
+            {
+                foreach (var a in eventConfig.Actions)
+                {
+                    DeviceJsonApi.DoDeviceAction(a);
+                }
+            });
+        }
+
+
+        public void RoomPowerOn()
+        {
+            foreach (var display in _displays)
+            {
+                display.Value.PowerOn();
+            }
+        }
+
+        public void RoomPowerOff()
+        {
+            foreach (var display in _displays)
+            {
+                display.Value.PowerOff();
+            }
+        }
+
+        private Dictionary<string, T> GetDevices<T>(ICollection<string> config) where T : IKeyed
+        {
+            try
+            {
+                var returnValue = DeviceManager.AllDevices.OfType<T>()
+                    .Where(d => config.Contains(d.Key))
+                    .ToDictionary(d => d.Key, d => d);
+
+                return returnValue;
+            }
+            catch
+            {
+                Debug.Console(0, this, Debug.ErrorLogLevel.Error,
+                    "Error getting devices. Check Essentials Configuration");
+                return null;
+            }
+        }
+
+        #region Overrides of EssentialsRoomBase
+
+        protected override Func<bool> IsWarmingFeedbackFunc
+        {
+            get { return () => false; }
+        }
+
+        protected override Func<bool> IsCoolingFeedbackFunc
+        {
+            get { return () => false; }
+        }
+
+        protected override Func<bool> OnFeedbackFunc
+        {
+            get { return () => RoomPowerIsOn; }
+        }
+
+        protected override void EndShutdown()
+        {
+            
+        }
+
+        public override void SetDefaultLevels()
+        {
+            
+        }
+
+        public override void PowerOnToDefaultOrLastSource()
+        {
+            
+        }
+
+        public override bool RunDefaultPresentRoute()
+        {
+            return false;
+        }
+
+        public override void RoomVacatedForTimeoutPeriod(object o)
+        {
+            
+        }
+
+        #endregion
+    }
+
+    public class ScheduledEventEventArgs : EventArgs
+    {
+        public List<ScheduledEventConfig> ScheduledEvents;
+    }
+}

essentials-framework/Essentials Core/PepperDashEssentialsBase/Bridges/JoinMaps/DmChassisControllerJoinMap.cs

@@ -76,6 +76,14 @@ namespace PepperDash.Essentials.Core.Bridges
         public JoinDataComplete HdcpSupportCapability = new JoinDataComplete(new JoinData { JoinNumber = 1201, JoinSpan = 32 },
             new JoinMetadata { Description = "DM Chassis Input HDCP Support Capability", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
 
+        [JoinName("InputStreamCardState")]
+        public JoinDataComplete InputStreamCardState = new JoinDataComplete(new JoinData { JoinNumber = 1501, JoinSpan = 32 },
+            new JoinMetadata { Description = "DM Chassis Stream Input Start (1), Stop (2), Pause (3) with Feedback", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
+
+        [JoinName("OutputStreamCardState")]
+        public JoinDataComplete OutputStreamCardState = new JoinDataComplete(new JoinData { JoinNumber = 1601, JoinSpan = 32 },
+            new JoinMetadata { Description = "DM Chassis Stream Output Start (1), Stop (2), Pause (3) with Feedback", JoinCapabilities = eJoinCapabilities.FromSIMPL, JoinType = eJoinType.Analog });
+
         [JoinName("InputNames")]
         public JoinDataComplete InputNames = new JoinDataComplete(new JoinData { JoinNumber = 101, JoinSpan = 32 },
             new JoinMetadata { Description = "DM Chassis Input Name", JoinCapabilities = eJoinCapabilities.ToSIMPL, JoinType = eJoinType.Serial });

essentials-framework/Essentials Core/PepperDashEssentialsBase/Comm and IR/ComPortController.cs

@@ -56,6 +56,11 @@ namespace PepperDash.Essentials.Core
 
 	    private void RegisterAndConfigureComPort()
 	    {
+	        if (Port == null)
+	        {
+	            Debug.Console(0,this,Debug.ErrorLogLevel.Error, "Configured com Port for this device does not exist.");
+	            return;
+	        }
             if (Port.Parent is CrestronControlSystem)
             {
                 var result = Port.Register();

essentials-framework/Essentials Core/PepperDashEssentialsBase/Comm and IR/CommFactory.cs

@@ -104,7 +104,7 @@ namespace PepperDash.Essentials.Core
 			var dev = GetIComPortsDeviceFromManagedDevice(config.ControlPortDevKey);
 			if (dev != null && config.ControlPortNumber <= dev.NumberOfComPorts)
 				return dev.ComPorts[config.ControlPortNumber];
-			Debug.Console(0, "GetComPort: Device '{0}' does not have com port {1}", config.ControlPortDevKey, config.ControlPortNumber);
+			Debug.Console(0,Debug.ErrorLogLevel.Notice, "GetComPort: Device '{0}' does not have com port {1}", config.ControlPortDevKey, config.ControlPortNumber);
 			return null;
 		}
 

essentials-framework/Essentials Core/PepperDashEssentialsBase/Display/BasicIrDisplay.cs

@@ -20,8 +20,7 @@ namespace PepperDash.Essentials.Core
 		public IrOutputPortController IrPort { get; private set; }
 		public ushort IrPulseTime { get; set; }
 
-        [Obsolete("This property will be removed in version 2.0.0")]
-        public override BoolFeedback PowerIsOnFeedback { get; protected set; }
+        public BoolFeedback PowerIsOnFeedback { get; private set; }
 
         protected Func<bool> PowerIsOnFeedbackFunc
         {

essentials-framework/Essentials Core/PepperDashEssentialsBase/Display/DisplayBase.cs

@@ -18,7 +18,7 @@ namespace PepperDash.Essentials.Core
 	/// <summary>
 	/// 
 	/// </summary>
-    public abstract class DisplayBase : EssentialsDevice, IHasFeedback, IRoutingSinkWithSwitching, IHasPowerControl, IWarmingCooling, IUsageTracking, IPower
+    public abstract class DisplayBase : EssentialsDevice, IHasFeedback, IRoutingSinkWithSwitching, IHasPowerControl, IWarmingCooling, IUsageTracking
 	{
         public event SourceInfoChangeHandler CurrentSourceChange;
 
@@ -49,9 +49,6 @@ namespace PepperDash.Essentials.Core
 		public BoolFeedback IsCoolingDownFeedback { get; protected set; }
 		public BoolFeedback IsWarmingUpFeedback { get; private set; }
 
-        [Obsolete("This property will be removed in version 2.0.0")]
-        public abstract BoolFeedback PowerIsOnFeedback { get; protected set; }
-
         public UsageTracking UsageTracker { get; set; }
 
 		public uint WarmupTime { get; set; }
@@ -264,8 +261,7 @@ namespace PepperDash.Essentials.Core
 
         abstract protected Func<string> CurrentInputFeedbackFunc { get; }
 
-        public override BoolFeedback PowerIsOnFeedback { get; protected set; }
-
+        public BoolFeedback PowerIsOnFeedback { get; protected set; }
         abstract protected Func<bool> PowerIsOnFeedbackFunc { get; }
 
 

essentials-framework/Essentials Core/PepperDashEssentialsBase/Global/Scheduler.cs

@@ -1,11 +1,10 @@
 using System;
 using System.Collections.Generic;
-using System.Linq;
-using System.Text;
 using Crestron.SimplSharp;
 using Crestron.SimplSharp.Scheduler;
 
 using PepperDash.Core;
+using PepperDash.Essentials.Room.Config;
 
 namespace PepperDash.Essentials.Core
 {
@@ -14,7 +13,7 @@ namespace PepperDash.Essentials.Core
     /// </summary>
     public static class Scheduler
     {
-        private static Dictionary<string, ScheduledEventGroup> EventGroups = new Dictionary<string,ScheduledEventGroup>();
+        private static readonly Dictionary<string, ScheduledEventGroup> EventGroups = new Dictionary<string,ScheduledEventGroup>();
 
         static Scheduler()
         {
@@ -49,7 +48,6 @@ namespace PepperDash.Essentials.Core
         /// <summary>
         /// Adds the event group to the global list
         /// </summary>
-        /// <param name="name"></param>
         /// <returns></returns>
         public static void AddEventGroup(ScheduledEventGroup eventGroup)
         {
@@ -67,6 +65,13 @@ namespace PepperDash.Essentials.Core
             if(!EventGroups.ContainsKey(eventGroup.Name))
                 EventGroups.Remove(eventGroup.Name);
         }
+
+        public static ScheduledEventGroup GetEventGroup(string key)
+        {
+            ScheduledEventGroup returnValue;
+
+            return EventGroups.TryGetValue(key, out returnValue) ? returnValue : null;
+        }
     }
 
     public static class SchedulerUtilities
@@ -135,5 +140,50 @@ namespace PepperDash.Essentials.Core
 
             return isMatch;
         }
+
+        public static bool CheckEventTimeForMatch(ScheduledEvent evnt, DateTime time)
+        {
+            return evnt.DateAndTime.Hour == time.Hour && evnt.DateAndTime.Minute == time.Minute;
+        }
+
+        public static bool CheckEventRecurrenceForMatch(ScheduledEvent evnt, ScheduledEventCommon.eWeekDays days)
+        {
+            return evnt.Recurrence.RecurrenceDays == days;
+        }
+
+        public static void CreateEventFromConfig(ScheduledEventConfig config, ScheduledEventGroup group, ScheduledEvent.UserEventCallBack handler)
+        {
+            if (group == null)
+            {
+                Debug.Console(0, "Unable to create event. Group is null");
+                return;
+            }
+            var scheduledEvent = new ScheduledEvent(config.Key, group)
+            {
+                Acknowledgeable = config.Acknowledgeable,
+                Persistent = config.Persistent
+            };
+
+            scheduledEvent.UserCallBack += handler;
+
+            scheduledEvent.DateAndTime.SetFirstDayOfWeek(ScheduledEventCommon.eFirstDayOfWeek.Sunday);
+
+            var eventTime = DateTime.Parse(config.Time);
+
+            if (DateTime.Now > eventTime) eventTime = eventTime.AddDays(1);
+
+            scheduledEvent.DateAndTime.SetAbsoluteEventTime(eventTime);
+
+            scheduledEvent.Recurrence.Weekly(config.Days);
+
+            if (config.Enable)
+            {
+                scheduledEvent.Enable();
+            }
+            else
+            {
+                scheduledEvent.Disable();
+            }
+        }
     }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/PepperDash_Essentials_Core.csproj

@@ -278,6 +278,7 @@
     <Compile Include="Remotes\Hrxx0WirelessRemoteController.cs" />
     <Compile Include="Room\Behaviours\RoomOnToDefaultSourceWhenOccupied.cs" />
     <Compile Include="Room\EssentialsRoomBase.cs" />
+    <Compile Include="Room\Config\EssentialsRoomScheduledEventsConfig.cs" />
     <Compile Include="Room\Interfaces.cs" />
     <Compile Include="Room\iOccupancyStatusProvider.cs" />
     <Compile Include="Routing\DummyRoutingInputsDevice.cs" />

essentials-framework/Essentials Core/PepperDashEssentialsBase/Presets/DevicePresets.cs

@@ -1,178 +1,227 @@
 using System;
 using System.Collections.Generic;
-using System.Linq;
 using System.Text;
 using Crestron.SimplSharp;
 using Crestron.SimplSharp.CrestronIO;
-
 using Newtonsoft.Json;
-using Newtonsoft.Json.Linq;
-
 using PepperDash.Core;
 
 //using SSMono.IO;
 
 namespace PepperDash.Essentials.Core.Presets
 {
-	/// <summary>
-	/// Class that represents the model behind presets display
-	/// </summary>
-	public class DevicePresetsModel : Device
-	{
-		public event EventHandler PresetsLoaded;
+    /// <summary>
+    /// Class that represents the model behind presets display
+    /// </summary>
+    public class DevicePresetsModel : Device
+    {
+        private readonly bool _initSuccess;
 
-		public int PulseTime { get; set; }
-		public int DigitSpacingMS { get; set; }
-		public bool PresetsAreLoaded { get; private set; }
+        /// <summary>
+        /// The methods on the STB device to call when dialing
+        /// </summary>
+        private Dictionary<char, Action<bool>> _dialFunctions;
 
-		public List<PresetChannel> PresetsList { get { return _PresetsList.ToList(); } }
-		List<PresetChannel> _PresetsList;
-		public int Count { get { return PresetsList != null ? PresetsList.Count : 0; } }
+        private bool _dialIsRunning;
+        private Action<bool> _enterFunction;
+        private string _filePath;
 
-		public bool UseLocalImageStorage { get; set; }
-		public string ImagesLocalHostPrefix { get; set; }
-		public string ImagesPathPrefix { get; set; }
-		public string ListPathPrefix { get; set; }
+        public DevicePresetsModel(string key, ISetTopBoxNumericKeypad setTopBox, string fileName)
+            : this(key, fileName)
+        {
+            try
+            {
+                // Grab the digit functions from the device
+                // If any fail, the whole thing fails peacefully
+                _dialFunctions = new Dictionary<char, Action<bool>>(10)
+                {
+                    {'1', setTopBox.Digit1},
+                    {'2', setTopBox.Digit2},
+                    {'3', setTopBox.Digit3},
+                    {'4', setTopBox.Digit4},
+                    {'5', setTopBox.Digit5},
+                    {'6', setTopBox.Digit6},
+                    {'7', setTopBox.Digit7},
+                    {'8', setTopBox.Digit8},
+                    {'9', setTopBox.Digit9},
+                    {'0', setTopBox.Digit0},
+                    {'-', setTopBox.Dash}
+                };
+            }
+            catch
+            {
+                Debug.Console(0, "DevicePresets '{0}', not attached to INumericKeypad device. Ignoring", key);
+                _dialFunctions = null;
+                return;
+            }
 
-		/// <summary>
-		/// The methods on the STB device to call when dialing
-		/// </summary>
-		Dictionary<char, Action<bool>> DialFunctions;
-		Action<bool> EnterFunction;
+            _enterFunction = setTopBox.KeypadEnter;
+        }
 
-		bool DialIsRunning;
-		string FilePath;
-		bool InitSuccess;
-        //SSMono.IO.FileSystemWatcher ListWatcher;
+        public DevicePresetsModel(string key, string fileName) : base(key)
+        {
+            PulseTime = 150;
+            DigitSpacingMs = 150;
 
-		public DevicePresetsModel(string key, ISetTopBoxNumericKeypad setTopBox, string fileName)
-			: base(key)
-		{
-			PulseTime = 150;
-			DigitSpacingMS = 150;
+            UseLocalImageStorage = true;
 
-			try
-			{
-				// Grab the digit functions from the device
-				// If any fail, the whole thing fails peacefully
-				DialFunctions = new Dictionary<char, Action<bool>>(10)
-				{
-					{ '1', setTopBox.Digit1 },
-					{ '2', setTopBox.Digit2 },
-					{ '3', setTopBox.Digit3 },
-					{ '4', setTopBox.Digit4 },
-					{ '5', setTopBox.Digit5 },
-					{ '6', setTopBox.Digit6 },
-					{ '7', setTopBox.Digit7 },
-					{ '8', setTopBox.Digit8 },
-					{ '9', setTopBox.Digit9 },
-					{ '0', setTopBox.Digit0 },
-					{ '-', setTopBox.Dash }
-				};
-			}
-			catch
-			{
-				Debug.Console(0, "DevicePresets '{0}', not attached to INumericKeypad device. Ignoring", key);
-				DialFunctions = null;
-				return;
-			}
+            ImagesLocalHostPrefix = "http://" + CrestronEthernetHelper.GetEthernetParameter(
+                CrestronEthernetHelper.ETHERNET_PARAMETER_TO_GET.GET_CURRENT_IP_ADDRESS, 0);
+            ImagesPathPrefix = @"/presets/images.zip/";
+            ListPathPrefix = @"/html/presets/lists/";
 
-			EnterFunction = setTopBox.KeypadEnter;
+            SetFileName(fileName);
 
-			UseLocalImageStorage = true;
+            _initSuccess = true;
+        }
 
-			ImagesLocalHostPrefix = "http://" + CrestronEthernetHelper.GetEthernetParameter(
-				CrestronEthernetHelper.ETHERNET_PARAMETER_TO_GET.GET_CURRENT_IP_ADDRESS,0);
-			ImagesPathPrefix = @"/presets/images.zip/";
-			ListPathPrefix = @"/html/presets/lists/";
+        public int PulseTime { get; set; }
+        public int DigitSpacingMs { get; set; }
+        public bool PresetsAreLoaded { get; private set; }
 
-			SetFileName(fileName);
+        public List<PresetChannel> PresetsList { get; private set; }
 
-            //ListWatcher = new FileSystemWatcher(@"\HTML\presets\lists");
-            //ListWatcher.NotifyFilter = NotifyFilters.LastWrite;
-            //ListWatcher.EnableRaisingEvents = true;
-            //ListWatcher.Changed += ListWatcher_Changed;
-			InitSuccess = true;
-		}
+        public int Count
+        {
+            get { return PresetsList != null ? PresetsList.Count : 0; }
+        }
+
+        public bool UseLocalImageStorage { get; set; }
+        public string ImagesLocalHostPrefix { get; set; }
+        public string ImagesPathPrefix { get; set; }
+        public string ListPathPrefix { get; set; }
+        public event EventHandler PresetsLoaded;
 
 
-		public void SetFileName(string path)
-		{
-			FilePath = ListPathPrefix + path;
-			LoadChannels();
-		}	
+        public void SetFileName(string path)
+        {
+            _filePath = ListPathPrefix + path;
+            LoadChannels();
+        }
 
-		public void LoadChannels()
-		{
-			PresetsAreLoaded = false;
-			try
-			{
-				var pl = JsonConvert.DeserializeObject<PresetsList>(Crestron.SimplSharp.CrestronIO.File.ReadToEnd(FilePath, Encoding.ASCII));
-				Name = pl.Name;
-				_PresetsList = pl.Channels;
-			}
-			catch (Exception e)
-			{
-				Debug.Console(2, this, "LoadChannels: Error reading presets file. These presets will be empty:\r  '{0}'\r  Error:{1}", FilePath, e.Message);
-				// Just save a default empty list
-				_PresetsList = new List<PresetChannel>();
-			}
-			PresetsAreLoaded = true;
+        public void LoadChannels()
+        {
+            PresetsAreLoaded = false;
+            try
+            {
+                var pl = JsonConvert.DeserializeObject<PresetsList>(File.ReadToEnd(_filePath, Encoding.ASCII));
+                Name = pl.Name;
+                PresetsList = pl.Channels;
+            }
+            catch (Exception e)
+            {
+                Debug.Console(2, this,
+                    "LoadChannels: Error reading presets file. These presets will be empty:\r  '{0}'\r  Error:{1}",
+                    _filePath, e.Message);
+                // Just save a default empty list
+                PresetsList = new List<PresetChannel>();
+            }
+            PresetsAreLoaded = true;
 
-			var handler = PresetsLoaded;
-			if (handler != null)
-				handler(this, EventArgs.Empty);
-		}
+            var handler = PresetsLoaded;
+            if (handler != null)
+            {
+                handler(this, EventArgs.Empty);
+            }
+        }
 
-		public void Dial(int presetNum)
-		{
-			if (presetNum <= _PresetsList.Count)
-				Dial(_PresetsList[presetNum - 1].Channel);
-		}
+        public void Dial(int presetNum)
+        {
+            if (presetNum <= PresetsList.Count)
+            {
+                Dial(PresetsList[presetNum - 1].Channel);
+            }
+        }
 
-		public void Dial(string chanNum)
-		{
-			if (DialIsRunning || !InitSuccess) return;
-			if (DialFunctions == null)
-			{
-				Debug.Console(1, "DevicePresets '{0}', not attached to keypad device. Ignoring channel", Key);
-				return;
-			}
+        public void Dial(string chanNum)
+        {
+            if (_dialIsRunning || !_initSuccess)
+            {
+                return;
+            }
+            if (_dialFunctions == null)
+            {
+                Debug.Console(1, "DevicePresets '{0}', not attached to keypad device. Ignoring channel", Key);
+                return;
+            }
 
-			DialIsRunning = true;
-			CrestronInvoke.BeginInvoke(o =>
-				{
-					foreach (var c in chanNum.ToCharArray())
-					{
-						if (DialFunctions.ContainsKey(c))
-							Pulse(DialFunctions[c]);
-						CrestronEnvironment.Sleep(DigitSpacingMS);
-					}
+            _dialIsRunning = true;
+            CrestronInvoke.BeginInvoke(o =>
+            {
+                foreach (var c in chanNum.ToCharArray())
+                {
+                    if (_dialFunctions.ContainsKey(c))
+                    {
+                        Pulse(_dialFunctions[c]);
+                    }
+                    CrestronEnvironment.Sleep(DigitSpacingMs);
+                }
 
-					if (EnterFunction != null)
-						Pulse(EnterFunction);
-					DialIsRunning = false;
-				});
-		}
+                if (_enterFunction != null)
+                {
+                    Pulse(_enterFunction);
+                }
+                _dialIsRunning = false;
+            });
+        }
 
-		void Pulse(Action<bool> act)
-		{
-			act(true);
-			CrestronEnvironment.Sleep(PulseTime);
-			act(false);
-		}
+        public void Dial(int presetNum, ISetTopBoxNumericKeypad setTopBox)
+        {
+            if (presetNum <= PresetsList.Count)
+            {
+                Dial(PresetsList[presetNum - 1].Channel, setTopBox);
+            }
+        }
 
-		/// <summary>
-		/// Event handler for filesystem watcher.  When directory changes, this is called
-		/// </summary>
-        //void ListWatcher_Changed(object sender, FileSystemEventArgs e)
-        //{
-        //    Debug.Console(1, this, "folder modified: {0}", e.FullPath);
-        //    if (e.FullPath.Equals(FilePath, StringComparison.OrdinalIgnoreCase))
-        //    {
-        //        Debug.Console(1, this, "File changed: {0}", e.ChangeType);			
-        //        LoadChannels();
-        //    }
-        //}
-	}
+        public void Dial(string chanNum, ISetTopBoxNumericKeypad setTopBox)
+        {
+            _dialFunctions = new Dictionary<char, Action<bool>>(10)
+            {
+                {'1', setTopBox.Digit1},
+                {'2', setTopBox.Digit2},
+                {'3', setTopBox.Digit3},
+                {'4', setTopBox.Digit4},
+                {'5', setTopBox.Digit5},
+                {'6', setTopBox.Digit6},
+                {'7', setTopBox.Digit7},
+                {'8', setTopBox.Digit8},
+                {'9', setTopBox.Digit9},
+                {'0', setTopBox.Digit0},
+                {'-', setTopBox.Dash}
+            };
+
+            _enterFunction = setTopBox.KeypadEnter;
+
+            Dial(chanNum);
+        }
+
+        public void UpdatePreset(int index, PresetChannel preset)
+        {
+            if (index >= PresetsList.Count)
+            {
+                return;
+            }
+
+            PresetsList[index] = preset;
+
+            SavePresets();
+        }
+
+        private void SavePresets()
+        {
+            var json = JsonConvert.SerializeObject(PresetsList);
+
+            using (var file = File.Open(_filePath, FileMode.Truncate))
+            {
+                file.Write(json, Encoding.UTF8);
+            }
+        }
+
+        private void Pulse(Action<bool> act)
+        {
+            act(true);
+            CrestronEnvironment.Sleep(PulseTime);
+            act(false);
+        }
+    }
 }

essentials-framework/Essentials Core/PepperDashEssentialsBase/Room/Config/EssentialsRoomScheduledEventsConfig.cs

@@ -0,0 +1,40 @@
+using System.Collections.Generic;
+using Crestron.SimplSharp.Scheduler;
+using Newtonsoft.Json;
+using PepperDash.Essentials.Core;
+
+namespace PepperDash.Essentials.Room.Config
+{
+    public class EssentialsRoomScheduledEventsConfig
+    {
+        [JsonProperty("scheduledEvents")]
+        public List<ScheduledEventConfig> ScheduledEvents;
+    }
+
+    public class ScheduledEventConfig
+    {
+        [JsonProperty("key")]
+        public string Key;
+
+        [JsonProperty("name")]
+        public string Name;
+
+        [JsonProperty("days")]
+        public ScheduledEventCommon.eWeekDays Days;
+
+        [JsonProperty("time")]
+        public string Time;
+
+        [JsonProperty("actions")]
+        public List<DeviceActionWrapper> Actions;
+
+        [JsonProperty("persistent")]
+        public bool Persistent;
+
+        [JsonProperty("acknowledgeable")]
+        public bool Acknowledgeable;
+
+        [JsonProperty("enable")]
+        public bool Enable;
+    }
+}

essentials-framework/Essentials DM/Essentials_DM/Chassis/DmChassisController.cs

@@ -49,7 +49,9 @@ namespace PepperDash.Essentials.DM
         public BoolFeedback EnableAudioBreakawayFeedback { get; private set; }
         public BoolFeedback EnableUsbBreakawayFeedback { get; private set; }
 
-        public Dictionary<uint, IntFeedback> InputCardHdcpStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> InputCardHdcpStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> InputStreamCardStateFeedbacks { get; private set; }
+        public Dictionary<uint, IntFeedback> OutputStreamCardStateFeedbacks { get; private set; }
 
         public Dictionary<uint, eHdcpCapabilityType> InputCardHdcpCapabilityTypes { get; private set; }
 
@@ -223,7 +225,9 @@ namespace PepperDash.Essentials.DM
             EnableUsbBreakawayFeedback =
                 new BoolFeedback(() => (Chassis as DmMDMnxn).EnableUSBBreakawayFeedback.BoolValue);
 
-            InputCardHdcpStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            InputCardHdcpStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            InputStreamCardStateFeedbacks = new Dictionary<uint, IntFeedback>();
+            OutputStreamCardStateFeedbacks = new Dictionary<uint, IntFeedback>();
             InputCardHdcpCapabilityTypes = new Dictionary<uint, eHdcpCapabilityType>();
 
             for (uint x = 1; x <= Chassis.NumberOfOutputs; x++)
@@ -307,6 +311,33 @@ namespace PepperDash.Essentials.DM
                         //     return hdMdNxMHdmiOutput.HdmiOutputPort.DisabledByHdcpFeedback.BoolValue;
 
                         return false;
+                    });
+                    OutputStreamCardStateFeedbacks[tempX] = new IntFeedback(() =>
+                    {
+                        try
+                        {
+                            var outputCard = Chassis.Outputs[tempX];
+
+                            if (outputCard.Card is DmcStroAV)
+                            {
+                                Debug.Console(2, "Found output stream card in slot: {0}.", tempX);
+                                var streamCard = outputCard.Card as DmcStroAV;
+                                if (streamCard.Control.StartFeedback.BoolValue == true)
+                                    return 1;
+                                else if (streamCard.Control.StopFeedback.BoolValue == true)
+                                    return 2;
+                                else if (streamCard.Control.PauseFeedback.BoolValue == true)
+                                    return 3;
+                                else
+                                    return 0;
+                            }
+                            return 0;
+                        }
+                        catch (InvalidOperationException iopex)
+                        {
+                            Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "Error adding output stream card in slot: {0}. Error: {1}", tempX, iopex);
+                            return 0;
+                        }
                     });
                 }
 
@@ -406,6 +437,33 @@ namespace PepperDash.Essentials.DM
                             Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "The Input Card in slot: {0} supports HDCP 2.  Please update the configuration value in the inputCardSupportsHdcp2 object to true. Error: {1}", tempX, iopex);
                             return 0;
                         }   
+                    });
+                    InputStreamCardStateFeedbacks[tempX] = new IntFeedback(() =>
+                    {
+                        try
+                        {
+                            var inputCard = Chassis.Inputs[tempX];
+
+                            if (inputCard.Card is DmcStr)
+                            {
+                                Debug.Console(2, "Found input stream card in slot: {0}.", tempX);
+                                var streamCard = inputCard.Card as DmcStr;
+                                if (streamCard.Control.StartFeedback.BoolValue == true)
+                                    return 1;
+                                else if (streamCard.Control.StopFeedback.BoolValue == true)
+                                    return 2;
+                                else if (streamCard.Control.PauseFeedback.BoolValue == true)
+                                    return 3;
+                                else
+                                    return 0;
+                            }
+                            return 0;
+                        }
+                        catch (InvalidOperationException iopex)
+                        {
+                            Debug.Console(0, this, Debug.ErrorLogLevel.Warning, "Error adding input stream card in slot: {0}. Error: {1}", tempX, iopex);
+                            return 0;
+                        }
                     });
                 }
             }
@@ -915,6 +973,19 @@ namespace PepperDash.Essentials.DM
                             else
                                 Debug.Console(1, this, "No index of {0} found in InputCardHdcpCapabilityFeedbacks");
                             break;
+                        }
+                    case DMInputEventIds.StartEventId:
+                    case DMInputEventIds.StopEventId:
+                    case DMInputEventIds.PauseEventId:
+                        {
+                            Debug.Console(2, this, "DM Input {0} Stream Status EventId", args.Number);
+                            if (InputStreamCardStateFeedbacks[args.Number] != null)
+                            {
+                                InputStreamCardStateFeedbacks[args.Number].FireUpdate();
+                            }
+                            else
+                                Debug.Console(2, this, "No index of {0} found in InputStreamCardStateFeedbacks");
+                            break;
                         }
                     default:
                         {
@@ -1043,6 +1114,19 @@ namespace PepperDash.Essentials.DM
                     Debug.Console(2, this, "DM Output {0} DisabledByHdcpEventId", args.Number);
                     OutputDisabledByHdcpFeedbacks[args.Number].FireUpdate();
                     break;
+                }
+                case DMOutputEventIds.StartEventId:
+                case DMOutputEventIds.StopEventId:
+                case DMOutputEventIds.PauseEventId:
+                {
+                    Debug.Console(2, this, "DM Output {0} Stream Status EventId", args.Number);
+                    if (OutputStreamCardStateFeedbacks[args.Number] != null)
+                    {
+                        OutputStreamCardStateFeedbacks[args.Number].FireUpdate();
+                    }
+                    else
+                        Debug.Console(2, this, "No index of {0} found in OutputStreamCardStateFeedbacks");
+                    break;
                 }
                 default:
                 {
@@ -1242,13 +1326,16 @@ namespace PepperDash.Essentials.DM
                 }
                 else
                 {
-                    LinkHdmiInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
-                }
-
-                if (RxDictionary.ContainsKey(ioSlot))
-                {
-                    LinkRxToApi(trilist, ioSlot, joinMap, ioSlotJoin);
-                }
+                    LinkHdmiInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                    LinkStreamInputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                }
+
+                if (RxDictionary.ContainsKey(ioSlot))
+                {
+                    LinkRxToApi(trilist, ioSlot, joinMap, ioSlotJoin);
+                }
+                else
+                    LinkStreamOutputToApi(trilist, ioSlot, joinMap, ioSlotJoin);
             }
         }
 
@@ -1295,6 +1382,86 @@ namespace PepperDash.Essentials.DM
             {
                 trilist.UShortInput[joinMap.HdcpSupportCapability.JoinNumber + ioSlotJoin].UShortValue = 1;
             }
+        }
+
+        private void LinkStreamInputToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)
+        {
+            var inputPort = InputPorts[string.Format("inputCard{0}--streamIn", ioSlot)];
+            if (inputPort == null)
+            {
+                return;
+            }
+            var streamCard = Chassis.Inputs[ioSlot].Card as DmcStr;
+            var join = joinMap.InputStreamCardState.JoinNumber + ioSlotJoin;
+
+            Debug.Console(1, "Port value for input card {0} is set as a stream card", ioSlot);
+
+            trilist.SetUShortSigAction(join, s =>
+            {
+                if (s == 1)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to start", join, s);
+                    streamCard.Control.Start();
+                }
+                else if (s == 2)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to stop", join, s);
+                    streamCard.Control.Stop();
+                }
+                else if (s == 3)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to pause", join, s);
+                    streamCard.Control.Pause();
+                }
+                else
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Ignore stream state", join, s);
+                }
+            });
+
+            InputStreamCardStateFeedbacks[ioSlot].LinkInputSig(trilist.UShortInput[join]);
+
+            trilist.UShortInput[join].UShortValue = InputStreamCardStateFeedbacks[ioSlot].UShortValue;
+        }
+
+        private void LinkStreamOutputToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)
+        {
+            var outputPort = OutputPorts[string.Format("outputCard{0}--streamOut", ioSlot)];
+            if (outputPort == null)
+            {
+                return;
+            }
+            var streamCard = Chassis.Outputs[ioSlot].Card as DmcStroAV;
+            var join = joinMap.OutputStreamCardState.JoinNumber + ioSlotJoin;
+
+            Debug.Console(1, "Port value for output card {0} is set as a stream card", ioSlot);
+
+            trilist.SetUShortSigAction(join, s =>
+            {
+                if (s == 1)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to start", join, s);
+                    streamCard.Control.Start();
+                }
+                else if (s == 2)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to stop", join, s);
+                    streamCard.Control.Stop();
+                }
+                else if (s == 3)
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Setting stream state to pause", join, s);
+                    streamCard.Control.Pause();
+                }
+                else
+                {
+                    Debug.Console(2, this, "Join {0} value {1}: Ignore stream state", join, s);
+                }
+            });
+
+            OutputStreamCardStateFeedbacks[ioSlot].LinkInputSig(trilist.UShortInput[join]);
+
+            trilist.UShortInput[join].UShortValue = OutputStreamCardStateFeedbacks[ioSlot].UShortValue;
         }
 
         private void LinkRxToApi(BasicTriList trilist, uint ioSlot, DmChassisControllerJoinMap joinMap, uint ioSlotJoin)

essentials-framework/Essentials Devices Common/Essentials Devices Common/VideoCodec/CiscoCodec/CiscoSparkCodec.cs

@@ -516,12 +516,16 @@ namespace PepperDash.Essentials.Devices.Common.VideoCodec.Cisco
             SendText("xconfiguration userinterface custommessage: \"Scan the QR code with a mobile phone to get started\"");
             SendText("xconfiguration userinterface osd halfwakemessage: \"Tap the touch panel or scan the QR code with a mobile phone to get started\"");
 
+            var checksum = !String.IsNullOrEmpty(mcBridge.QrCodeChecksum)
+                ? String.Format("checksum: {0} ", mcBridge.QrCodeChecksum)
+                : String.Empty;
+
             SendText(String.Format(
-                            "xcommand userinterface branding fetch type: branding url: {0}",
-                            mcBridge.QrCodeUrl));
+                "xcommand userinterface branding fetch {1}type: branding url: {0}",
+                mcBridge.QrCodeUrl, checksum));
             SendText(String.Format(
-                "xcommand userinterface branding fetch type: halfwakebranding url: {0}",
-                mcBridge.QrCodeUrl));
+                "xcommand userinterface branding fetch {1}type: halfwakebranding url: {0}",
+                mcBridge.QrCodeUrl, checksum));
         }
 
         private void SendBrandingUrl()