Initial plan

src/PepperDash.Essentials.Core/Bridges/BridgeBase.cs

@@ -30,17 +30,6 @@ namespace PepperDash.Essentials.Core.Bridges
         {
 
         }
-
-        /// <summary>
-        /// Constructor
-        /// </summary>
-        /// <param name="key"></param>
-        /// <param name="name"></param>
-        protected BridgeApi(string key, string name) :
-            base(key, name)
-        {
-
-        }
     }
 
     /// <summary>
@@ -69,7 +58,7 @@ namespace PepperDash.Essentials.Core.Bridges
         /// <param name="dc">Device configuration</param>
         /// <param name="eisc">EISC instance</param>
         public EiscApiAdvanced(DeviceConfig dc, BasicTriList eisc) :
-            base(dc.Key, dc.Name)
+            base(dc.Key)
         {
             JoinMaps = new Dictionary<string, JoinMapBaseAdvanced>();
 

src/PepperDash.Essentials.Core/DeviceTypeInterfaces/INetworkSwitchControl.cs

@@ -1,102 +0,0 @@
-using System;
-
-namespace PepperDash.Essentials.Core.DeviceTypeInterfaces
-{
-    /// <summary>
-    /// Interface for network switches that support VLAN assignment on individual ports.
-    /// </summary>
-    public interface INetworkSwitchVlanManager
-    {
-        /// <summary>
-        /// Returns the current access VLAN ID configured on the port.
-        /// Return -1 when the value is unavailable (e.g. the switch has not been polled yet
-        /// or the implementation does not support VLAN queries).
-        /// </summary>
-        /// <param name="port">Switch port identifier</param>
-        /// <returns>VLAN ID or -1 when unavailable</returns>
-        int GetPortCurrentVlan(string port);
-
-        /// <summary>
-        /// Changes the access VLAN of a single switch port.
-        /// The implementation is responsible for entering/exiting privileged/config mode.
-        /// </summary>
-        /// <param name="port">Switch port identifier (e.g. "1/0/3" for Netgear, "gi1/0/3" for Cisco)</param>
-        /// <param name="vlanId">Target VLAN ID (1-4093)</param>
-        void SetPortVlan(string port, uint vlanId);
-    }
-
-    /// <summary>
-    /// Interface for network switches that support Power over Ethernet (PoE) control on individual ports.
-    /// </summary>
-    public interface INetworkSwitchPoeManager
-    {
-        /// <summary>
-        /// Enables or disables PoE power delivery on a single switch port.
-        /// The implementation is responsible for entering/exiting privileged/config mode.
-        /// </summary>
-        /// <param name="port">Switch port identifier</param>
-        /// <param name="enabled">True to enable PoE; false to disable PoE</param>
-        void SetPortPoeState(string port, bool enabled);
-    }
-
-    /// <summary>
-    /// Standardized interface for network switch devices that support per-port PoE control
-    /// and VLAN assignment.
-    /// </summary>
-    public interface INetworkSwitchPoeVlanManager : INetworkSwitchVlanManager, INetworkSwitchPoeManager
-    {
-        /// <summary>
-        /// Event that is raised when the state of a switch port changes, such as a VLAN change or PoE state change.
-        /// </summary>
-        event EventHandler<NetworkSwitchPortEventArgs> PortStateChanged;
-
-    }
-
-    /// <summary>
-    /// Event arguments for port state changes on a network switch, such as VLAN changes or PoE state changes.
-    /// </summary>
-    public class NetworkSwitchPortEventArgs : EventArgs
-    {
-        /// <summary>
-        /// The identifier of the port that changed state (e.g. "1/0/3" for Netgear, "gi1/0/3" for Cisco).
-        /// </summary>
-        public string Port { get; private set; }
-        
-        /// <summary>
-        /// The type of event that occurred on the port (e.g. VLAN change, PoE enabled/disabled).
-        /// </summary>
-        public NetworkSwitchPortEventType EventType { get; private set; }
-
-        /// <summary>
-        /// Constructor for NetworkSwitchPortEventArgs
-        /// </summary>
-        /// <param name="port">The identifier of the port that changed state</param>
-        /// <param name="eventType">The type of event that occurred on the port</param>
-        public NetworkSwitchPortEventArgs(string port, NetworkSwitchPortEventType eventType)
-        {
-            Port = port;
-            EventType = eventType;
-        }
-    }
-
-    /// <summary>
-    /// Event arguments for port state changes on a network switch, such as VLAN changes or PoE state changes.
-    /// </summary>
-    public enum NetworkSwitchPortEventType
-    {
-        /// <summary>
-        /// Indicates that the access VLAN on a port has changed, either through a successful call to SetPortVlan
-        /// </summary>
-        VlanChanged,
-
-        /// <summary>
-        /// Indicates that the PoE state on a port has changed, either through a successful call to SetPortPoeState
-        /// </summary>
-        PoEDisabled,
-
-        /// <summary>
-        /// Indicates that the PoE state on a port has changed, either through a successful call to SetPortPoeState
-        /// </summary>
-        PoEEnabled
-    }
-}

src/PepperDash.Essentials.Core/Factory/DeviceFactory.cs

@@ -36,17 +36,8 @@ namespace PepperDash.Essentials.Core
         {
             var programAssemblies = Directory.GetFiles(InitialParametersClass.ProgramDirectory.ToString(), "*.dll");
 
-            // Assemblies known to cause load errors that should be skipped
-            var assembliesToSkip = new[] { "CrestronOnvif.dll" };
-
             foreach (var assembly in programAssemblies)
             {
-                if (assembliesToSkip.Any(a => Path.GetFileName(assembly).Equals(a, StringComparison.OrdinalIgnoreCase)))
-                {
-                    Debug.LogMessage(LogEventLevel.Verbose, "Skipping assembly: {assemblyName}", Path.GetFileName(assembly));
-                    continue;
-                }
-
                 try
                 {
                     Assembly.LoadFrom(assembly);